9 resultater (0,27442 sekunder)

Mærke

Farve

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Dynaudio Emit 30 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere  uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room,

DKK 8620.00
1

Dynaudio Emit 30 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere  uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room,

DKK 8620.00
1

Dynaudio Emit 30 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 30 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere  uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room,

DKK 8620.00
1

Dynaudio Emit 25C - Centerhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 25C - Centerhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 25C - Hjertet i dit surroundsystem Det siges, at soundtracket er op til 80 procent af filmoplevelsen, og derfor er centerhøjttaleren helt central for din opleves. Der kan argumenteres for, at Emit 25C er den vigtigste del i din hjemmebiograf. Det er nemlig her, at dialogen fra en film kommer fra, og det er her, at musikkens omdrejningspunkt ofte kommer fra i et multi-kanal mix. Det er afgørende at få dette punkt rigtigt, og det gør Emit 25C. Emit 25C er grundlæggende en Emit 30, der er vendt på siden, med mellemtone/basenhederne placeret på begge sider af diskanten. Enhederne er de samme og delefilteret er det samme - dog med en anden boks og port-tuning. Men det er ikke at gøre dit system en bjørnetjeneste; stik modsat. Det betyder, at du får total sammenhæng mellem centerhøjttaleren og de to, der flankerer den (uanset om det er Emit 10, 20, 30 eller endda 50), sammen med de andre, du måtte placerer omkring din lytteposition. Emit 25C key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-quality mid/bass drivers Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound. The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics. Top-end performance Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session. Danish cabinet design Emit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself. Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

DKK 5295.00
1

Dynaudio Emit 25C - Centerhøjtaler - Sort - Fri fragt

Dynaudio Emit 25C - Centerhøjtaler - Sort - Fri fragt

Dynaudio Emit 25C - Hjertet i dit surroundsystem Det siges, at soundtracket er op til 80 procent af filmoplevelsen, og derfor er centerhøjttaleren helt central for din opleves. Der kan argumenteres for, at Emit 25C er den vigtigste del i din hjemmebiograf. Det er nemlig her, at dialogen fra en film kommer fra, og det er her, at musikkens omdrejningspunkt ofte kommer fra i et multi-kanal mix. Det er afgørende at få dette punkt rigtigt, og det gør Emit 25C. Emit 25C er grundlæggende en Emit 30, der er vendt på siden, med mellemtone/basenhederne placeret på begge sider af diskanten. Enhederne er de samme og delefilteret er det samme - dog med en anden boks og port-tuning. Men det er ikke at gøre dit system en bjørnetjeneste; stik modsat. Det betyder, at du får total sammenhæng mellem centerhøjttaleren og de to, der flankerer den (uanset om det er Emit 10, 20, 30 eller endda 50), sammen med de andre, du måtte placerer omkring din lytteposition. Emit 25C key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-quality mid/bass drivers Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound. The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics. Top-end performance Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session. Danish cabinet design Emit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself. Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

DKK 5295.00
1

Dynaudio Emit 25C - Centerhøjtaler - Hvid - Fri fragt

Dynaudio Emit 25C - Centerhøjtaler - Hvid - Fri fragt

Dynaudio Emit 25C - Hjertet i dit surroundsystem Det siges, at soundtracket er op til 80 procent af filmoplevelsen, og derfor er centerhøjttaleren helt central for din opleves. Der kan argumenteres for, at Emit 25C er den vigtigste del i din hjemmebiograf. Det er nemlig her, at dialogen fra en film kommer fra, og det er her, at musikkens omdrejningspunkt ofte kommer fra i et multi-kanal mix. Det er afgørende at få dette punkt rigtigt, og det gør Emit 25C. Emit 25C er grundlæggende en Emit 30, der er vendt på siden, med mellemtone/basenhederne placeret på begge sider af diskanten. Enhederne er de samme og delefilteret er det samme - dog med en anden boks og port-tuning. Men det er ikke at gøre dit system en bjørnetjeneste; stik modsat. Det betyder, at du får total sammenhæng mellem centerhøjttaleren og de to, der flankerer den (uanset om det er Emit 10, 20, 30 eller endda 50), sammen med de andre, du måtte placerer omkring din lytteposition. Emit 25C key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-quality mid/bass drivers Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound. The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics. Top-end performance Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session. Danish cabinet design Emit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself. Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

DKK 5295.00
1

Dynaudio Emit 50 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaler - Brun Valnød - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaleren til det hele Uanset om du vil bygge et kraftfuldt stereoanlæg eller løfte dine filmoplevelser til nye højder, så har Emit 50 dig dækket. Her er der tale om et par store gulvhøjtalere, som gør et ordentligt statement helt uden at sprænge bankkontoen. Dens avanceret teknologi og tuning leverer vellyd til dit rum i et prisleje, der er åbent for selv dem, der tager deres første skridt ind i high-fidelity lyd. Emit 50 leverer et niveau af kraft og finesse, som du ærligt talt kan betale den dobbelte pris for andre steder. Men hvorfor skulle du det? Dens dobbelte 18 cm basenheder, 15 cm mellemtone og 28 mm soft-dome Cerotar diskant er hver især dedikeret til at producere den klarest mulige ydeevne - ved en lydstyrke helt oppe på biografniveau. Emit 50 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-performance woofers Let’s give you the bottom line: Emit 50’s woofers dig deep. The two 18cm units (the same type used in Emit 20) use trickle-down technology from our high-end Evoke, Contour i and Confidence families to deliver astonishing low-frequency performance, well above the previous Emit range. It means the speaker can dig truly deep into the bass (-3dB at 33Hz, which equals Contour 60i and Confidence 60, if you’re into numbers), but allows us to keep the cabinet at a size that still fits your living room. The one-piece cones are made from our own in-house-formulated MSP (Magnesium Silicate Polymer) material, complete with integrated dust-cap. Making drivers from one piece of material, rather than sticking on a separate piece, gives the playing surface a much better connection to the voice-coil behind it. And that means better control over their movement: less unwanted distortion and resonance, and more fine detail – even in the lowest notes. Unlike the other speakers in the series, Emit 50’s woofers use copper voice-coils. That’s because they don’t need to be quite as sprightly as they would when also handling midrange duties (as on Emit 20). So, we’ve used heavier copper for more outright punch. That’s intensified by the dual-stacked magnet system, which is optimised to direct its energy directly into the voice-coil. Dedicated midrange driver The midrange driver is a different beast. Exclusive to Emit 50, it’s derived from the version we used in the Evoke range – which, in turn, came directly from the high-end Contour series. It has a powerful ferrite ceramic magnet, a short version of the 38mm-diameter aluminium voice-coil (specifically optimised for midrange performance), and a lightweight surround. It’s designed for speed and precision: exactly what you need for reproducing nuanced vocals, orchestral strings and wind instruments, and more. Sweet high frequencies Emit 50’s Cerotar tweeter is the same as you’ll find in the Evoke family. It’s a ground-up design that uses key technologies developed for our award-winning Special Forty anniversary speaker, plus Confidence and even our Core range of professional studio reference monitors. Our engineers are really proud of it, and rightly so. Cerotar’s 28mm coated fabric soft-dome diaphragm sits on top of another Dynaudio innovation: the Hexis. This ingenious dimpled inner dome is placed close enough behind the fabric to stop unwanted resonance reflecting back to the rear of the playing surface. It keeps the frequency response smooth for cleaner, sweeter treble – and more detail in your music. The tweeter is powered by a powerful Ferrite+ strontium carbonate ceramic magnet to give it more sensitivity. That translates to your ears as more authentic performance – you hear what you’re meant to hear; nothing more, nothing less. And because it’s so natural, it also reduces fatigue – so you can listen for longer. Clever hybrid crossover design There’s a traditional Dynaudio first-order circuit for the tweeter, a second-order design for the midrange driver, and a fourth-order topology for the woofers. Sure, we could’ve just created a single design to cover them all – but that would mean compromising performance, which is something our engineers simply won’t do. Authentic Danish design The cabinets have been designed and tuned in-house in Denmark. They’re constructed from 18mm MDF, and damped with specially selected polyester

DKK 11620.00
1

Dynaudio Emit 50 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaler - Sort - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaleren til det hele Uanset om du vil bygge et kraftfuldt stereoanlæg eller løfte dine filmoplevelser til nye højder, så har Emit 50 dig dækket. Her er der tale om et par store gulvhøjtalere, som gør et ordentligt statement helt uden at sprænge bankkontoen. Dens avanceret teknologi og tuning leverer vellyd til dit rum i et prisleje, der er åbent for selv dem, der tager deres første skridt ind i high-fidelity lyd. Emit 50 leverer et niveau af kraft og finesse, som du ærligt talt kan betale den dobbelte pris for andre steder. Men hvorfor skulle du det? Dens dobbelte 18 cm basenheder, 15 cm mellemtone og 28 mm soft-dome Cerotar diskant er hver især dedikeret til at producere den klarest mulige ydeevne - ved en lydstyrke helt oppe på biografniveau. Emit 50 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-performance woofers Let’s give you the bottom line: Emit 50’s woofers dig deep. The two 18cm units (the same type used in Emit 20) use trickle-down technology from our high-end Evoke, Contour i and Confidence families to deliver astonishing low-frequency performance, well above the previous Emit range. It means the speaker can dig truly deep into the bass (-3dB at 33Hz, which equals Contour 60i and Confidence 60, if you’re into numbers), but allows us to keep the cabinet at a size that still fits your living room. The one-piece cones are made from our own in-house-formulated MSP (Magnesium Silicate Polymer) material, complete with integrated dust-cap. Making drivers from one piece of material, rather than sticking on a separate piece, gives the playing surface a much better connection to the voice-coil behind it. And that means better control over their movement: less unwanted distortion and resonance, and more fine detail – even in the lowest notes. Unlike the other speakers in the series, Emit 50’s woofers use copper voice-coils. That’s because they don’t need to be quite as sprightly as they would when also handling midrange duties (as on Emit 20). So, we’ve used heavier copper for more outright punch. That’s intensified by the dual-stacked magnet system, which is optimised to direct its energy directly into the voice-coil. Dedicated midrange driver The midrange driver is a different beast. Exclusive to Emit 50, it’s derived from the version we used in the Evoke range – which, in turn, came directly from the high-end Contour series. It has a powerful ferrite ceramic magnet, a short version of the 38mm-diameter aluminium voice-coil (specifically optimised for midrange performance), and a lightweight surround. It’s designed for speed and precision: exactly what you need for reproducing nuanced vocals, orchestral strings and wind instruments, and more. Sweet high frequencies Emit 50’s Cerotar tweeter is the same as you’ll find in the Evoke family. It’s a ground-up design that uses key technologies developed for our award-winning Special Forty anniversary speaker, plus Confidence and even our Core range of professional studio reference monitors. Our engineers are really proud of it, and rightly so. Cerotar’s 28mm coated fabric soft-dome diaphragm sits on top of another Dynaudio innovation: the Hexis. This ingenious dimpled inner dome is placed close enough behind the fabric to stop unwanted resonance reflecting back to the rear of the playing surface. It keeps the frequency response smooth for cleaner, sweeter treble – and more detail in your music. The tweeter is powered by a powerful Ferrite+ strontium carbonate ceramic magnet to give it more sensitivity. That translates to your ears as more authentic performance – you hear what you’re meant to hear; nothing more, nothing less. And because it’s so natural, it also reduces fatigue – so you can listen for longer. Clever hybrid crossover design There’s a traditional Dynaudio first-order circuit for the tweeter, a second-order design for the midrange driver, and a fourth-order topology for the woofers. Sure, we could’ve just created a single design to cover them all – but that would mean compromising performance, which is something our engineers simply won’t do. Authentic Danish design The cabinets have been designed and tuned in-house in Denmark. They’re constructed from 18mm MDF, and damped with specially selected polyester

DKK 11620.00
1

Dynaudio Emit 50 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaleren til det hele Uanset om du vil bygge et kraftfuldt stereoanlæg eller løfte dine filmoplevelser til nye højder, så har Emit 50 dig dækket. Her er der tale om et par store gulvhøjtalere, som gør et ordentligt statement helt uden at sprænge bankkontoen. Dens avanceret teknologi og tuning leverer vellyd til dit rum i et prisleje, der er åbent for selv dem, der tager deres første skridt ind i high-fidelity lyd. Emit 50 leverer et niveau af kraft og finesse, som du ærligt talt kan betale den dobbelte pris for andre steder. Men hvorfor skulle du det? Dens dobbelte 18 cm basenheder, 15 cm mellemtone og 28 mm soft-dome Cerotar diskant er hver især dedikeret til at producere den klarest mulige ydeevne - ved en lydstyrke helt oppe på biografniveau. Emit 50 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-performance woofers Let’s give you the bottom line: Emit 50’s woofers dig deep. The two 18cm units (the same type used in Emit 20) use trickle-down technology from our high-end Evoke, Contour i and Confidence families to deliver astonishing low-frequency performance, well above the previous Emit range. It means the speaker can dig truly deep into the bass (-3dB at 33Hz, which equals Contour 60i and Confidence 60, if you’re into numbers), but allows us to keep the cabinet at a size that still fits your living room. The one-piece cones are made from our own in-house-formulated MSP (Magnesium Silicate Polymer) material, complete with integrated dust-cap. Making drivers from one piece of material, rather than sticking on a separate piece, gives the playing surface a much better connection to the voice-coil behind it. And that means better control over their movement: less unwanted distortion and resonance, and more fine detail – even in the lowest notes. Unlike the other speakers in the series, Emit 50’s woofers use copper voice-coils. That’s because they don’t need to be quite as sprightly as they would when also handling midrange duties (as on Emit 20). So, we’ve used heavier copper for more outright punch. That’s intensified by the dual-stacked magnet system, which is optimised to direct its energy directly into the voice-coil. Dedicated midrange driver The midrange driver is a different beast. Exclusive to Emit 50, it’s derived from the version we used in the Evoke range – which, in turn, came directly from the high-end Contour series. It has a powerful ferrite ceramic magnet, a short version of the 38mm-diameter aluminium voice-coil (specifically optimised for midrange performance), and a lightweight surround. It’s designed for speed and precision: exactly what you need for reproducing nuanced vocals, orchestral strings and wind instruments, and more. Sweet high frequencies Emit 50’s Cerotar tweeter is the same as you’ll find in the Evoke family. It’s a ground-up design that uses key technologies developed for our award-winning Special Forty anniversary speaker, plus Confidence and even our Core range of professional studio reference monitors. Our engineers are really proud of it, and rightly so. Cerotar’s 28mm coated fabric soft-dome diaphragm sits on top of another Dynaudio innovation: the Hexis. This ingenious dimpled inner dome is placed close enough behind the fabric to stop unwanted resonance reflecting back to the rear of the playing surface. It keeps the frequency response smooth for cleaner, sweeter treble – and more detail in your music. The tweeter is powered by a powerful Ferrite+ strontium carbonate ceramic magnet to give it more sensitivity. That translates to your ears as more authentic performance – you hear what you’re meant to hear; nothing more, nothing less. And because it’s so natural, it also reduces fatigue – so you can listen for longer. Clever hybrid crossover design There’s a traditional Dynaudio first-order circuit for the tweeter, a second-order design for the midrange driver, and a fourth-order topology for the woofers. Sure, we could’ve just created a single design to cover them all – but that would mean compromising performance, which is something our engineers simply won’t do. Authentic Danish design The cabinets have been designed and tuned in-house in Denmark. They’re constructed from 18mm MDF, and damped with specially selected polyester

DKK 11620.00
1