21 resultater (0,23328 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Noctua NF-F12 industrialPPC-24V-3000 SP IP67 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC-24V-3000 SP IP67 PWM, 120mm -kotelotuuletin, musta

These 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 36.90
1

Noctua NF-F12 industrialPPC-24V-2000 SP IP67 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC-24V-2000 SP IP67 PWM, 120mm -kotelotuuletin, musta

These 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 36.90
1

Noctua NF-A14 industrial PPC-24V-3000 SP, IP67, PWM, 140mm -kotelotuuletin

Noctua NF-A14 industrial PPC-24V-3000 SP, IP67, PWM, 140mm -kotelotuuletin

Conceived for industrial heavy-duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. The 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.3000rpm industrialppc versionrunning twice as fast as the 1500rpm retail version, the nf-a14 industrialppc-3000 provides extreme airflow and pressure performance. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.24v sp versionthe industrialppc 24v sp models use noctua's new ne-fd5 high-performance single-phase pwm motor driver ic. Thanks to its excellent commutation efficiency, the ne-fd5 enables the sp versions to achieve exactly the same performance as previous models with three-phase motors.lower speed and noise levels in 12v pc environmentswhile the industrialppc 24v model has been designed with 24v industrial applications in mind, it runs at a maximum speed of around 1800rpm in 12v pc environments and can be slowed down further via pwm, thus combining industrialppc features and design with noctua’s signature quietness.ne-fd5 pwm ic with scdsupporting fully automatic pwm speed control, the fan uses noctua’s custom-designed ne-fd5 pwm ic for 24v single-phase motors. The ne-fd5 provides excellent energy efficiency and integrates noctua's proprietary smooth commutation drive (scd) technology, which suppresses pwm switching noise and thus makes the fan quieter at lower speeds.high electrical robustnessmeeting stringent requirements for burst and surge protection, the 24v sp version’s high electrical robustness permits the fan to be used not only in automotive projects but also in other harsh environments with transients from electric motors and other inductive switching loads.inrush current suppressionthe fan’s voltage-stabilised inrush current suppression provides a smooth power-up and dramatically reduces power line transients that otherwise could affect other electronic components connected to the power line. This makes the fan safe to use in sensitive electronic environments.certified ip67 water- and dust protectionthe motor and pcb of the ip67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating ip67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachmen

EUR 41.90
1

Noctua NT-H2 AM5 Edition, 3.5g -lämpötahna

Noctua NT-H2 AM5 Edition, 3.5g -lämpötahna

Nt-h2 is the further improved second generation of noctua’s award-winning hybrid thermal compound. Combining the iconic nt-h1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, nt-h2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, cpu or gpu applications, overclocking or silent systems: nt-h2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply. The am5 edition also includes the na-tpg1 thermal paste guard that prevents thermal paste build-up in the cut-outs of the heatspreader of amd am5 cpus – a simple yet highly effective means to keep your am5 processor clean.based on the award-winning nt-h1nt-h2 is based on noctua’s renowned nt-h1, which has received more than 150 awards and recommendations from international hardware websites and magazines. Chosen again and again by overclockers and enthusiast users worldwide, nt-h1 has established itself as a benchmark for premium-quality thermal interface materials (tims).next-generation performancefurther improving the award-winning nt-h1, nt-h2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.am5 edition with thermal paste guardwhen the mounting pressure of the cooling solution is applied, excess thermal paste will be squeezed outwards. With am5 cpus, this excess paste tends to accumulate in the cut-outs at the sides of the heatspreader and may become difficult to remove. Simple and risk-free to apply, the na-tpg1 prevents this undesired phenomenon.easy to applythanks to its excellent spreading properties, there is no need to manually spread nt-h2 before installing the cooler: simply apply some paste onto the cpu (see instructions for details), put on the heatsink and you’re ready to go!easy to clean with included wipesthe 3.5g pack of nt-h2 includes three large na-cw1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: simply wipe off the paste from the cpu and the base of the cooler using one of the wipes and you’re done!optional na-scw1 set for power userspower users who take off and install their coolers frequently can purchase the optional na-scw1 set that contains 20 pieces of the na-cw1 cleaning wipes, which are ideal for removing nt-h2 from the heat-spreader of the cpu and the contact surface of the heatsink.not electrically conductive, non-corrodingwhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with nt-h2 and it’s completely safe to use with any type of cpu cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not.excellent long-term stabilitynt-h2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the cpu for 5 years or more.no break-in or burn-in requiredsome thermal compounds need a longer break-in period or cure time until they reach their full performance and some thermal pads must undergo a dedicated burn-in process. By contrast, nt-h2 is ready to go right away and doesn’t require any special preparations.3.5g package for 3-20 applicationssufficient for around 3-20 applications (depending on the size of the cpu or gpu, e.g. Around 3 applications for large cpus such as tr4, 15 for am4/am5 or lga1700, and around 20 for small cpus such as lga1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then.

EUR 16.90
1

Noctua NT-H2, 3.5g -lämpötahna

Noctua NT-H2, 3.5g -lämpötahna

Based on the award-winning nt-h1nt-h2 is based on noctua’s renowned nt-h1, which has received more than 150 awards and recommendations from international hardware websites and magazines. Chosen again and again by overclockers and enthusiast users worldwide, nt-h1 has established itself as a benchmark for premium-quality thermal interface materials (tims).next-generation performancefurther improving the award-winning nt-h1, nt-h2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.easy to applythanks to its excellent spreading properties, there is no need to manually spread nt-h2 before installing the cooler: simply apply some paste onto the cpu (see instructions for details), put on the heatsink and you’re ready to go!easy to clean with included wipesthe 3.5g pack of nt-h2 includes three large na-cw1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: simply wipe off the paste from the cpu and the base of the cooler using one of the wipes and you’re done!optional na-scw1 set for power userspower users who take off and install their coolers frequently can purchase the optional na-scw1 set that contains 20 pieces of the na-cw1 cleaning wipes, which are ideal for removing nt-h2 from the heat-spreader of the cpu and the contact surface of the heatsink.not electrically conductive, non-corrodingwhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with nt-h2 and it’s completely safe to use with any type of cpu cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not.excellent long-term stabilitynt-h2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the cpu for 5 years or more.no break-in or burn-in requiredsome thermal compounds need a longer break-in period or cure time until they reach their full performance and some thermal pads must undergo a dedicated burn-in process. By contrast, nt-h2 is ready to go right away and doesn’t require any special preparations.3.5g package for 3-20 applicationssufficient for around 3-20 applications (depending on the size of the cpu or gpu, e.g. Around 3 applications for large cpus such as tr4 and around 20 for small cpus such as lga1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then.

EUR 16.90
1

Noctua NH-U12S SE-AM4 U-Type -prosessorijäähdytin

Noctua NH-U12S SE-AM4 U-Type -prosessorijäähdytin

Continuing the legacy of noctua’s classic nh-u-series, which has received more than 500 awards and recommendations from international hardware websites and magazines, the nh-u12s has become a benchmark for slim, highly compatible 120mm single tower coolers. The se-am4 version is a dedicated special edition for amd’s am4 (ryzen) platform, featuring the latest secufirm2™ mounting system for am4. Topped off with the renowned quiet nf-f12 pwm 120mm fan, noctua’s proven nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-u12s se-am4 forms a complete premium-quality solution that combines outstanding performance, superb acoustics and excellent compatibility for am4 systems.award-winning nh-u12s coolertens of thousands of enthusiast users all over the world swear by the nh-u12s’ quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.dedicated special edition for am4the nh-u12s se-am4 brings the nh-u12s’ signature quiet cooling performance to amd’s new am4 platform. With its excellent balance of efficiency, quietness and compatibility, the nh-u12s se-am4 is a perfect fit for premium-class am4 builds.classic 120mm tower size for excellent overall compatibilitystanding 158mm tall, the nh-u12s is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top pcie slot on standard atx or micro-atx motherboards, ensuring best compatibility with sli and crossfire setups.nf-f12 120mm focused flow™ fanrecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the noctua's premium quality nf-f12 focused flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.pwm support and low-noise adaptorthe nf-f12 120mm fan supplied with the nh-u12s supports pwm for convenient automatic speed control through the mainboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied low-noise adaptor for even quieter operation.anti-vibration pads and fan-clips for second nf-f12 (optional)for users who want to achieve even better performance by adding a second, optional nf-f12 fan to create a push/pull setup, the nh-u12s includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.secufirm2™ mounting system for am4noctua’s secufirm2™ mounting systems have become synonymous with quality, safety and ease of use. In order to achieve the best compatibility and to match the airflow path inside the case, the secufirm2™ mounting for am4 makes it possible to install the cooler either in standard orientation or turned by 90°.nt-h1 thermal compoundhaving received more than 100 awards and recommendations from hardware journalists around the world, noctua's nt-h1 is a proven professional grade tim solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the supplied nf-f12 features an mtbf rating of more than 150.000 hours and the entire nh-u12s package comes with a full 6-year manufacturer's warranty.

EUR 84.90
1

Noctua NH-D15 SE AM4 D-Type Premium -prosessorijäähdytin

Noctua NH-D15 SE AM4 D-Type Premium -prosessorijäähdytin

Having received more than 200 awards and recommendations from international hardware websites and magazines, noctua’s flagship model nh-d15 has become a benchmark for elite-class dual tower coolers. The se-am4 version is a dedicated special edition for amd’s am4 (ryzen) platform featuring the latest secufirm2™ mounting system for am4. Topped off with two of the renowned quiet nf-a15 pwm 140mm fans, noctua’s proven nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-d15 se-am4 forms a complete premium-quality solution that represents a deluxe choice for both overclockers and silent enthusiasts who strive to tune their am4 systems to the max.award-winning nh-d15 coolertens of thousands of enthusiast users all over the world swear by the nh-d15’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned for being one of the best high-end coolers on the market.dedicated special edition for am4the nh-d15 se-am4 brings the nh-d15’s signature quiet cooling performance to amd’s new am4 platform. With its supreme capacity at extreme heat loads, it allows overclockers to push their am4 systems to the limit and silent enthusiasts to run the fans at super-low speeds.6 heatpipe dual tower designas compared to conventional single tower heatinks, the nh-d15's fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.widened fin stack and expanded heatpipe layoutcompared to the nh-d14, the nh-d15's fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the nh-d15's superior efficiency.high ram compatibility in single fan modethanks to its recessed lower fins, the nh-d15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end ram modules on the market. In dual fan mode, the nh-d15 should be used with standard height ram (up to 32mm).dual nf-a15 140mm fansthe nh-d15 features two of noctua's premium class nf-a15 140mm fans. Complying with noctua's aao standard and featuring sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a15 has quickly built up a reputation as one of the best 140mm fans on the market.pwm support and low-noise adaptorthe nf-a15 premium fans supplied with the nh-d15 support pwm for convenient automatic speed control through the mainboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied low-noise adaptor for even quieter operation.excellent component coolingextending below the fin-stacks, the large nf-a15 fans not only contribute to the nh-d15's superb cpu cooling capabilities but also provide massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance.secufirm2™ mounting system for am4noctua’s secufirm2™ mounting systems have become synonymous with quality, safety and ease of use. In order to achieve the best compatibility and to match the airflow path inside the case, the secufirm2™ mounting for am4 makes it possible to install the cooler either in standard orientation or turned by 90°.nt-h1 thermal compoundnoctua's much-acclaimed nt-h1 is a well proven pro-grade tim solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the supplied nf-a15's feature an mtbf rating of more than 150.000 hours and the entire nh-d15 package comes with a full 6-year manufacturer's warranty.

EUR 114.90
1

Noctua NF-A14 industrial PPC-3000, PWM, 140mm - kotelotuuletin, musta

Noctua NF-A14 industrial PPC-3000, PWM, 140mm - kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.3000rpm industrialppc versionrunning twice as fast as the 1500rpm retail version, the nf-a14 industrialppc-3000 provides extreme airflow and pressure performance. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications. Three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-a14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip52 water- and dust protectionthanks to a special varnish coating that covers the motor and pcb, the nf-a14 industrialppc complies with the ingress protection rating ip52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute. Flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.sso2 bearingthe nf-a14 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the nf-a14 industrialppc sports a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a14 industrialppc uses noctua's custom-designed ne-fd2 pwm ic for three-phase motors. The ne-fd2 integrates noctua's proprietary smooth commutation drive (scd) technology, which suppresses pwm switching noises and thus makes the

EUR 31.90
2

Noctua NF-A12x25 5V PWM Premium, 120mm -tuuletin, valkoinen

Noctua NF-A12x25 5V PWM Premium, 120mm -tuuletin, valkoinen

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 4-pin pwm version supports fully automatic speed control via pwm fan headers and comes with a low-noise adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket that can be used when installing the fan on

EUR 34.90
1

Noctua NF-A12x25r PWM, 120mm -kotelotuuletin, valkoinen

Noctua NF-A12x25r PWM, 120mm -kotelotuuletin, valkoinen

The nf-a12x25r is a round-frame version of noctua’s award-winning flagship model 120mm nf-a12x25 fan. Its round shape makes it ideal for use on low-height dual-tower cpu coolers like the nh-d12l as well as other space-restricted applications that cannot accommodate square-frame 120mm fans. Just like the square nf-a12x25, the round nf-a12x25r uses a record-tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Sharing the same state-of-the-art impeller design with flow acceleration channels, the nf-a12x25r achieves the same class-leading quiet cooling performance as its square-frame sibling. It also supports fully automatic speed control via pwm fan headers and comes with a low-noise adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25r is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for all 120mm applications that require a round frame.award-winning nf-a12x25 impellernoctua’s nf-a12x25 has captured the hearts of quiet cooling enthusiasts around the world and reshaped the common perception of what 120mm fans can do. With more than 100 awards and recommendations from the international press, it is widely considered to be the best 120mm fan on the market. The nf-a12x25r combines the same impeller with a round frame.round frame designthe nf-a12x25r is identical to the nf-a12x25 except for its round frame that allows it to be used in applications where a square-frame 120mm fan would not fit. For example, the nf-a12x25r is ideal for being sunk in between the dual towers of the low-height nh-d12l cooler without causing compatibility problems with tall motherboard heatsinks or shrouds.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan

EUR 31.90
1

Noctua NF-A12x25 5V Premium, 120mm -tuuletin

Noctua NF-A12x25 5V Premium, 120mm -tuuletin

The nf-a12x25 5v is a dedicated 5v version of noctua’s award-winning, premium-quality nf-a12x25 120mm fan. Featuring an aao (advanced acoustic optimisation) standard frame and sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a12x25 is renowned for its superior performance and outstanding quietness of operation. Smooth commutation drive technology and noctua’s reference class sso2 bearing guarantee superb running smoothness and excellent long-term stability. Topped off with the included usb power adaptor cable, omnijoin™ adaptor set and 6-year manufacturer’s warranty, the nf-a12x25 5v is a premium choice for demanding 5v applications.being a 5v fan, the nf-a12x25 5v cannot be run at 12v and will be damaged when used with typical 12v power sources such as pc motherboard fan headers.5v version5v fans are used in various devices and applications. With the included usb power adaptor cable and omnijoin™ adaptor set, the nf-a12x25 5v is a proven premium solution that gives you full flexibility both for replacing existing 5v fans and for new, custom applications.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.smooth commutation drive 2the latest version of noctua's advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances.polarity protectionas many devices using 5v fans feature proprietary connectors, and documentation of the pin alignment may not be available, the fan features an integrate

EUR 34.90
2

Noctua NF-A12x25 LS-PWM, 120mm -kotelotuuletin

Noctua NF-A12x25 LS-PWM, 120mm -kotelotuuletin

Having received more than 100 awards and recommendations from international hardware websites and magazines, noctua’s flagship model nf-a12x25 has established itself as a true deluxe choice when it comes to premium-quality quiet 120mm fans. Various state-of-the-art technologies and a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer material, allow it to achieve superb results in all types of usage: whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators, the nf-a12x25 is a proven winner. The 4-pin ls-pwm version is a low-speed, pwm-enabled variant that is ideal for semi-passive setups or ultra-low-noise applications that require near-silent acoustics and pwm based speed control. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.award-winning nf-a12x25 designfirst introduced in 2018, the nf-a12x25 has taken the hearts of quiet cooling enthusiasts around the world by storm and reshaped the common perception of what 120mm fans can do. With more than 100 awards and recommendations from the international press, it’s widely considered to be the best 120mm fan on the market.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all s

EUR 32.90
1

Noctua NF-A12x25, PWM, chromax.black.swap, 120mm -kotelotuuletin, musta

Noctua NF-A12x25, PWM, chromax.black.swap, 120mm -kotelotuuletin, musta

Having received more than 100 awards and recommendations from international hardware websites and magazines, noctua’s flagship model nf-a12x25 has established itself as a true deluxe choice when it comes to premium-quality quiet 120mm fans. Various state-of-the-art technologies and a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer material, allow it to achieve superb results in all types of usage: whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators, the nf-a12x25 is a proven winner. The 4-pin ls-pwm version is a low-speed, pwm-enabled variant that is ideal for semi-passive setups or ultra-low-noise applications that require near-silent acoustics and pwm based speed control. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.award-winning nf-a12x25 designfirst introduced in 2018, the nf-a12x25 has taken the hearts of quiet cooling enthusiasts around the world by storm and reshaped the common perception of what 120mm fans can do. With more than 100 awards and recommendations from the international press, it’s widely considered to be the best 120mm fan on the market.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all s

EUR 33.90
1

Noctua NF-A12x25 ULN Premium Fan 120x25mm -tuuletin

Noctua NF-A12x25 ULN Premium Fan 120x25mm -tuuletin

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 3-pin uln version provides super-slow 1200/900rpm speed settings for ultra-low-noise applications and highly noise-sensitive users who demand near-silent acoustics. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket that can be used when installing the fan

EUR 32.90
1

Noctua NF-A12x25 FLX Premium, 120mm -kotelotuuletin

Noctua NF-A12x25 FLX Premium, 120mm -kotelotuuletin

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 3-pin flx version provides 2000/1700/1350rpm speed settings via the supplied low-noise adaptors so as to give full flexibility in configuring the fan for maximum cooling capacity or near-silent acoustics. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket

EUR 32.90
1

Noctua NH-U12A -prosessorijäähdytin

Noctua NH-U12A -prosessorijäähdytin

The nh-u12a is the latest, 5th generation of noctua’s award-winning nh-u12 series of 120mm size premium-quality quiet cpu coolers. Conceived to push the envelope of the 120mm form factor, it combines two of noctua’s flagship model nf-a12x25 pwm 120mm fans with a completely redesigned heatsink featuring 7 heatpipes and an increased fin surface area for superior heat dissipation. This way, the nh-u12a can rival the performance of many 140mm size coolers while offering 120mm class case and pcie compatibility. Topped off with the trusted, pro-grade secufirm2™ multi-socket mounting system, noctua’s proven nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-u12a is a deluxe choice that combines top-tier performance with excellent compatibility and outstanding quietness of operation.award-winning nh-u12 seriesfirst introduced in 2005, noctua’s nh-u12 series has won more than 600 awards and recommendations from leading international hardware websites and magazines. The nh-u12a is the latest addition to this prestigious series that has established itself as a benchmark for premium-quality quiet 120mm coolers.140mm performance in 120mm sizethanks to its completely revised, thoroughly optimised 7 heatpipe layout, 37% more fin surface area (as compared to the nh-u12s) and a dual fan push/pull configuration that uses the new, state-of-the-art nf-a12x25 fans, the nh-u12a pushes the performance envelope in the 120mm class and can actually match or even outperform many 140mm sized coolers.100% ram compatibility on lga1851/lga1700 and am4/am5due to its asymmetric design, the nh-u12a does not overhang the ram slots on intel lga1851/lga1700/lga1200/lga115x and amd am4/am5 based motherboards, which ensures easy access to the modules and 100% compatibility with dimms that feature tall heat-spreaders.classic 120mm tower size for excellent case and pcie compatibilitystanding 158mm tall, the nh-u12a is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top pcie slot on most standard atx or micro-atx motherboards, ensuring optimum compatibility with multi-gpu setups.dual nf-a12 120mm fansthe nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. Using this elite-class fan in a push/pull dual fan configuration is one of the cornerstones of the nh-u12a’s commanding performance and acoustic efficiency.pwm support and low-noise adaptorsthe nf-a12 120mm fans supplied with the nh-u12a support pwm for convenient automatic speed control through the motherboard: full performance under load, virtually silent at idle! In addition, maximum fan speed can be reduced from 2000 to 1700rpm using the supplied low-noise adaptors for even quieter operation.secufirm2™ multi-socket mounting systemnoctua's secufirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting intel lga1851, lga1700 (since 2021), lga1200, lga115x (lga1150, lga1151, lga1155, lga1156) as well as amd am4 and am5 (since 2019), the secufirm2™ mounting included with the nh-u12a is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.offset mounting option for amd am5the nh-u12a includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact quality right above the ccd(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.compatibility with past and future socketsthanks to noctua’s secufirm™ ecosystem, the nh-u12a can be made compatible with the older lga1366 and lga775 sockets using the optional nm-i3 mounting kit, which is provided free of charge. If technically possible, noctua will also provide upgrade kits for future sockets, which makes the nh-u12a a safe long-term investment.nt-h1 thermal compoundnoctua’s much-acclaimed nt-h1 is a pro-grade tim solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.soldered interface between heatpipes and finswith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the nh-u12a’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.

EUR 126.90
1

Noctua NH-U12A chromax.black -prosessorijäähdytin

Noctua NH-U12A chromax.black -prosessorijäähdytin

The nh-u12a chromax.black is an all-black version of noctua’s award-winning nh-u12a premium-quality quiet cpu cooler. Thanks to the same proven asymmetrical single-tower heatsink design and state-of-the-art nf-a12x25 pwm fans, it stays true to the nh-u12a’s successful formula of fusing best-in-class cooling performance with superb quietness of operation and outstanding ram, case and pcie compatibility. At the same time, the chromax.black version with its black fans and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned secufirm2™ multi-socket mounting system, noctua’s enthusiast-grade nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-u12a chromax.black is a deluxe choice for customers who seek a highly compatible 120mm heatsink that can rival the performance of 140mm units and looks just as great as it cools.award-winning nh-u12a coolerthe nh-u12a has proven in countless tests that it can match or even outperform many 140mm sized coolers while offering 120mm class case and pcie compatibility. This winning combination of top-tier performance and excellent compatibility has earned the nh-u12a awards and recommendations from more than 100 hardware website and magazines across the word.chromax.black designthe nh-u12a chromax.black is black from head to toe: featuring a black coated heatsink, a black fan with black anti-vibration pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.colour-customisableusing the optional na-hc7 and na-hc8 heatsink covers as well as the na-savp1 anti-vibration pads (available in black, blue, green, red, yellow, white), the nh-u12a chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.140mm performance in 120mm sizethanks to its completely revised, thoroughly optimised 7 heatpipe layout, 37% more fin surface area (as compared to the nh-u12s) and a dual fan push/pull configuration that uses the new, state-of-the-art nf-a12x25 fans, the nh-u12a pushes the performance envelope in the 120mm class and can actually match or even outperform many 140mm sized coolers.100% ram compatibility on lga1851/lga1700 and am4/am5due to its asymmetric design, the nh-u12a does not overhang the ram slots on intel lga1851/lga1700/lga1200/lga115x and amd am4/am5 based motherboards, which ensures easy access to the modules and 100% compatibility with dimms that feature tall heat-spreaders.classic 120mm tower size for excellent case and pcie compatibilitystanding 158mm tall, the nh-u12a is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top pcie slot on most standard atx or micro-atx motherboards, ensuring optimum compatibility with multi-gpu setups.dual nf-a12 120mm fansthe nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. Using this elite-class fan in a push/pull dual fan configuration is one of the cornerstones of the nh-u12a’s commanding performance and acoustic efficiency.pwm support and low-noise adaptorsthe nf-a12 120mm fans supplied with the nh-u12a support pwm for convenient automatic speed control through the motherboard: full performance under load, virtually silent at idle! In addition, maximum fan speed can be reduced from 2000 to 1700rpm using the supplied low-noise adaptors for even quieter operation.secufirm2™ multi-socket mounting systemnoctua’s secufirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting intel lga1851, lga1700 (since 2021), lga1200, lga1156, lga1155, lga1151, lga1150 & amd am5 and am4 (since 2019), the secufirm2™ mounting included with the nh-u12a is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.offset mounting option for amd am5the nh-u12a chromax.black includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact quality right above the ccd(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.compatibility with past and future socketsthanks to noctua’s secufirm™ ecosystem, the nh-u12a can be made compatible with the older lga1366 and lga775 sockets using the optional nm-i3 mounting kit, which is provided free of charge. If technically possible, noctua will also provide upgrade kits for future sockets, which makes the nh-u12a a safe long-term investment.nt-h1 thermal compoundnoctua’s much-acclaimed nt-h1 is a pro-grade tim solution that provides minimum thermal resistance, excellent ease of use and

EUR 129.90
1

Noctua NH-U12S chromax.black -prosessorijäähdytin

Noctua NH-U12S chromax.black -prosessorijäähdytin

The nh-u12s chromax.black is an all-black version of noctua’s award-winning nh-u12s premium-quality quiet cpu cooler. Thanks to the same proven slim-tower heatsink design and nf-f12 pwm fan, it stays true to the nh-u12s’s successful formula of fusing excellent cooling performance with superb quietness of operation and outstanding ram, case and pcie compatibility. At the same time, the chromax.black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned secufirm2™ multi-socket mounting system, noctua’s enthusiast-grade nt-h1 thermal compound and a full 6-year manufacturer’s warranty, the nh-u12s chromax.black is a premium choice for customers who seek a highly compatible 120mm heatsink that looks just as great as it cools.award-winning nh-u12s coolertens of thousands of enthusiast users all over the world swear by the nh-u12s’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.chromax.black designthe nh-u12s chromax.black is black from head to toe: featuring a black coated heatsink, black fans with black anti-vibration pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.colour-customisableusing the optional na-hc1 and na-hc2 heatsink covers as well as the na-savp1 anti-vibration pads (available in black, blue, green, red, yellow, white), the nh-u12s chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.100% ram compatibilitythanks to its slim design with only 45mm fin depth, the nh-u12s will not overhang the ram slots even with two fans installed. This gives the user full access to the memory modules on all current cpu sockets and guarantees 100% compatibility with tall heatspreaders or optional memory fans.classic 120mm tower size for excellent overall compatibilitystanding 158mm tall, the nh-u12s is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top pcie slot on most standard atx or micro-atx motherboards, ensuring optimum compatibility with multi-gpu setups.nf-f12 120mm focused flow™ fanrecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the noctua's premium quality nf-f12 focused flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.pwm support and low-noise adaptorthe nf-f12 120mm fan supplied with the nh-u12s supports pwm for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied low-noise adaptor for even quieter operation.anti-vibration pads and fan-clips for second nf-f12 (optional)for users who want to achieve even better performance by adding a second, optional nf-f12 pwm chromax.black.swap fan to create a push/pull setup, the nh-u12s includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.secufirm2™ multi-socket mounting systemnoctua's secufirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting intel lga1851, lga1700 (since 2021), lga1200, lga115x (lga1150, lga1151, lga1155, lga1156) as well as amd am4 and am5 (since 2019), the secufirm2™ mounting included with the nh-u12s is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.offset mounting option for amd am5the nh-u12s chromax.black includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact quality right above the ccd(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.compatibility with past and future socketsthanks to noctua’s secufirm™ ecosystem, the nh-u12s can be made compatible with the older lga1366 and lga775 sockets using the optional nm-i3 mounting kit, which is provided free of charge. If technically possible, noctua will also provide upgrade kits for future sockets, which makes the nh-u12s a safe long-term investment.nt-h1 thermal compoundnoctua’s much-acclaimed nt-h1 is a pro-grade tim solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.soldered interface between heatpipes and finswith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansio

EUR 85.00
1