709 results (0,15979 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Advanced MXP-512 MxPro5 Printer Assembly

Advanced MXP-512 MxPro5 Printer Assembly

Advanced MXP-512 MxPro5 Printer AssemblyThe On-Board thermal printer is an internal peripheral for use with the MxPro 5 range of control panels. This additional unit provides automatic or on demand copy listings of the event log or status information. The unit being fast and silent during operation has its own in-built battery backup to enable continuous uninterrupted operation even during a mains fail situation. Spare rolls of thermal paper can easily be replaced due to the mechanisms easy access front-loading compartment.On-demand option for printingInputsOutputsDisablementsEvent LogNetwork FaultsCan be used for printing the panels event log or configured by the user to automatically print any of the following event types Fire Fault Alarm or Test. Note If an on-board printer is to be fitted to the panel with a zone indicator module use the Mxp-013-050 or Mxp-013-100 modules. The Mxp-025 20 Zone LED card cannot be used.Key FeaturesFast instant response3 year warranty as standardFast and silent operationThermal printerCost effective against ancillary hardware

GBP 456.14
1

Advanced MxPro5 MXP-512F Printer Assembly Fitted

Advanced MxPro5 MXP-512F Printer Assembly Fitted

Advanced MxPro5 MXP-512F Printer Assembly FittedThe On-Board thermal printer is an internal peripheral for use with the MxPro 5 range of control panels.This additional unit provides automatic or on demand copy listings of the event log or status information. The unit being fast and silent during operation has its own in-built battery backup to enable continuous uninterrupted operation even during a mains fail situation.Spare rolls of thermal paper can easily be replaced due to the mechanisms easy access front-loading compartment.On-demand option for printingInputsOutputsDisablementsEvent LogNetwork FaultsCan be used for printing the panels event log or configured by the user to automatically print any of the following event types Fire Fault Alarm or Test.Note If an on-board printer is to be fitted to the panel with a zone indicator module use the Mxp-013-050 or Mxp-013-100 modules. The Mxp-025 20 Zone LED card cannot be used.Key FeaturesFast instant response3-year warranty as standardFast and silent operationThermal printerCost effective against ancillary hardware

GBP 456.14
1

Advanced MxPro4amp5 PC-NET-003-USB Series Configuration Software cw USB Lead

Advanced MxPro4amp5 PC-NET-003-USB Series Configuration Software cw USB Lead

Advanced MxPro45 PC-NET-003-USB Series Configuration Software cw USB LeadPC-NET-Programming Suiteallows the configuration of the MxPro4 and MxPro5 series fire panels and is equipped with the latest programming options expected from a modern fire control panel.In addition to the standard configuration options the package allows sophisticated cause-and-effect variable sensitivities and time critical settings to be defined.The software also has a Virtual Panel display supports remote diagnostics and allows flexible connection either directly or via modem for all of the functions.Key FeaturesAllows full configuration of the MxPro4 and 5 panels and networkUser-friendly Windows based softwareVirtual panel displaySupports remote diagnosticsAssistants menu to check your design and configurationPanel branding via electronic logoService Tool for predicting false alarms and providingcustomised end user reportsPlease Note The PC-NET-003-USB comes complete with USB Upload Download Lead if you require a Serial configuration lead please use product code PC-NET-003

GBP 181.16
1

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager comes with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced MxPro MXM-530 MX-5000 Cable Clamp

Advanced MxPro MXM-530 MX-5000 Cable Clamp

Advanced MxPro MXM-530 MX-5000 Cable ClampAdvanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 5control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from that can be provided in various depths to meet the customers requirements.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColour matched to the MxPro rangeIdeal for first fix

GBP 39.22
1

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standardThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 504.90
1

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault TolerantThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 1114.76
1

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302

Advanced Lux Intelligent Pulse Light Unit with 250mm Cable LXP-302The Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 107.72
1

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302L

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302L

Advanced Lux Intelligent Pulse Light Unit with 1000mm Cable LXP-302LThe Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 111.12
1

Advanced MxPro5 MXP-547-BX ESPA Pager Interface Boxed

Advanced MxPro5 MXP-547-BX ESPA Pager Interface Boxed

Advanced MxPro5 MXP-547-BX ESPA Pager Interface BoxedThe Pager Interface is a programmable interface providing connectivity of third party paging systems to the MxPro 5 control equipment. It utilises the industry standard protocol ESPA 4.4.4 and connects to the equipment via a serial data connection. An optional input function is available to monitor pager fault conditions. Specific event types e.g. Fire Alarm Pre- Alarm Fault etc. can be sent to individual pagers andor to groups of pagers.Applications LimitationsFor use with pager systems compliant to ESPA 4.4.4 protocol. If a printer is also required fit an internal printer assembly.Key FeaturesUp to 8 configurable shifts per weekdayweekendUp to 50 pager groupsUp to 250 pager addressesEach pager address can be configured to cover 2 zone rangesZone andor point information can be sent to the pagerUser defined texts are available and the basic event type text can be configuredESPA 4.4.4 protocolPanel mounted or boxed versionEasily configured via pager PC Software3 year warranty as standardBoxed

GBP 1054.85
1

Advanced MxPro5 MXP-547F ESPA Pager Interface Fitted

Advanced MxPro5 MXP-547F ESPA Pager Interface Fitted

Advanced MxPro5 MXP-547F ESPA Pager Interface FittedThe Pager Interfaceis a programmable interface providing connectivity of third-party paging systems to the MxPro 5 control equipment.It utilises the industry standard protocol ESPA 4.4.4 and connects to the equipment via a serial data connection. An optional input function is available to monitor pager fault conditions.Specific event types e.g. Fire Alarm Pre- Alarm Fault etc. can be sent to individual pagers andor to groups of pagers.Applications LimitationsFor use with pager systems compliant to ESPA 4.4.4 protocol. If a printer is also required fit an internal printer assembly.Key FeaturesUp to 8 configurable shifts per weekdayweekendUp to 50 pager groupsUp to 250 pager addressesEach pager address can be configured to cover 2 zone rangesZone andor point information can be sent to the pagerUser defined texts are available and the basic event type text can be configuredESPA 4.4.4 protocolPanel mounted or boxed versionEasily configured via pager PC Software3-year warranty as standard

GBP 915.07
1