166 results (0,12896 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager comes with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced EX-3001 ExGo Extinguishing Control Panel with 3 Detection Zones Single Release Output

Advanced EX-3001 ExGo Extinguishing Control Panel with 3 Detection Zones Single Release Output

Advanced EX-3001 ExGo Extinguishing Control Panel with 3 Detection Zones Single Release OutputThe EX-3000 series three zone automatic extinguishing panel is approved to EN12094-1European standard for Fixed Fire-fighting Systems-Components for Gas Extinguishing Systems and EN54-parts 2 and 4. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO2 through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing cost effective solution to protect your work place.Key FeaturesUser Friendly Graphical LCD Display providing clearer status information and programming routinesMultiple LanguagesSlide in LabelsPass-code replaces physical key for level-2 access though optional key-switch may still be fitted if key is preferred.Time Date- stamped event log and improved diagnosticsCompany Logo can be displayed on LCD during normal conditions3 Year Warranty as StandardRS485 for Remote Status IndicatorsUser friendly PC Download tool via USB connection

GBP 691.06
1

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5403AE 1-4 Loop Fire Panel - 3 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2494.21
1

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocol

Advanced MX-5404AE 1-4 Loop Fire Panel - 4 Loop Cards - Extended CoreProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Compatible with AdvancedLive UKI only which is the fire panel monitoring solution that enables secure easy real-time management of an Advanced fire system. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the onboard alphanumeric keypad or PC-NeT-022 configuration software.Key FeaturesConnectivity to AdvancedLive UKI only Ethernet connection on-board20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Advanced networking peer-to-peer system with up to 2000 zonesProgrammable push buttonsRack-mount optionsGlobal compliance3-year warrantyFully programmableInstallers logo application

GBP 2685.85
1

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault Tolerant

Advanced MXP-545FT MxPro 5 Peripheral Expansion Network Node Fault TolerantThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 1114.76
1

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standard

Advanced MXP-545 MxPro 5 Peripheral Expansion Network Node standardThe Peripheral Expansion Network Node PENN provides the functionality of the MxPro 5 Series Fire Alarm Control Panels for use in bespoke graphical mimic connecting remote inputs and outputs directly to the network and other special build applications. The PENN allows a comprehensive range of peripherals to be connected to the network without having to install additional panels.Compatible expansion cards include Input MXP-537 Relay MXP-035 Mimic driver MXP-539 16 way Switch MXP-538 FanDamper Control MXP-543 Zone Monitor MXP-536 Sounder MXP-034 and ESPA Pager Interface MXP-547. Accessories such as a Display Card MXS-504 Printer MXP-512 and LED Indicators MXP-513-xxx can also be added.The PENN is pre-built to include either a Standard network or a Fault Tolerant FT network interface The unit is designed for easy wiring installation. Plug-in terminal blocks are provided for all connections to the unit. RS232 as well as USB Type B are built-in. The PENN is designed to be installed directly to mounting chassis plates such as MXM-515-6U MXM-515-8U etc. using six fixing screw positions. The chassis assembly can be mounted into MX-5000 and MX-5000R enclosures.Key FeaturesLets you install peripherals in remote locations without an additional panelDual Feed 24V DC Power Supply InputsNetwork in-built either Standard or Fault TolerantUp to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configurationSupports up to 32 PBUS modules 16 of any one typeOption to connect standard MX-5000 Display andor MXP-512 internal printer andor MXP-513 LED cardsSwitch Input General purpose or External PSE fault monitorRS232 Interface PC Configuration External Printer or MXP-547 ESPAUSB Interface PC Configuration

GBP 504.90
1

Advanced MxPro5 MX-5101NR 19quot Rack Mount FACP Nittan Evolution Protocol

Advanced MxPro5 MX-5101NR 19quot Rack Mount FACP Nittan Evolution Protocol

Advanced MxPro5 MX-5101NR 19 Rack Mount FACP Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1072.80
1

Advanced MxPro5 MX-5101R 1-Loop 19quot Rack Mount FACP

Advanced MxPro5 MX-5101R 1-Loop 19quot Rack Mount FACP

Advanced MxPro5 MX-5101R 1-Loop 19 Rack Mount FACPThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1072.80
1

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large Enclosure

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large Enclosure

Advanced MxPro5 MX-5101L 1-Loop Fire Panel in Large EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1166.66
1

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep Enclosure

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep Enclosure

Advanced MxPro5 MX-5101D 1-Loop Fire Panel in Large-Deep EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1225.43
1

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NL 1-Loop Fire Panel in Large Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1166.66
1

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101ND 1-Loop Fire Panel in Large-Deep Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1225.43
1

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core Protocol

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core Protocol

Advanced MX-5101A 1 Loop MxPro5 Fire Control Panel - Small Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1051.96
1

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core Protocol

Advanced MX-5101AM 1 Loop MxPro5 Fire Control Panel - Medium Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution Protocol

Advanced MxPro5 MX-5101NM 1-Loop Fire Panel in Medium Enclosure Nittan Evolution ProtocolThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium Enclosure

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium Enclosure

Advanced MxPro5 MX-5101M 1-Loop Fire Panel in Medium EnclosureThe MxPro5 series control panels are supplied with a single loop driver card 2 onboard sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software.An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 series fire panels. The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored.Simply adding a network card allows the panel to communicate with any other MxPro5 fire panel remote terminal or network peripheral such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable zonal 25 System LEDsApollo Argus Vega Hochiki Nittan Evolution protocol supportAdvanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardwareDedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn LoopDetection and On-board Scope facilityGraphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable terminationIntegral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1109.32
1

Advanced MxPro5 MX-5202VR 1-2 Loop 19quot Rack Mount FACP cw 2 Loop Cards Argus Vega Protocol

Advanced MxPro5 MX-5202VR 1-2 Loop 19quot Rack Mount FACP cw 2 Loop Cards Argus Vega Protocol

Advanced MxPro5 MX-5202VR 1-2 Loop 19 Rack Mount FACP comes with 2 Loop Cards Argus Vega ProtocolThe MxPro5 series control panels are fully expandable from 1 - 2 loops and supplied with 2 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro5 Series of Fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.Network Simply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSGraphical Interface. The network operates as a true peer-topeer system and can be configured in a fault-tolerant loop or radial format.Key FeaturesApollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dual flash-based microprocessor technology with real-time clock on-board.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facilities for ease of commissioning and fault finding.Graphical display configurable for virtually any languageRobust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Fully programmable via the on-board alphanumeric keypad or PC configuration tools.Integral P-Bus for system expansion via available option cardsAd-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 1573.52
1

Advanced MX-5202AL 1-2 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core Protocol

Advanced MX-5202AL 1-2 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core Protocol

Advanced MX-5202AL 1-2 Loop MxPro5 Fire Control Panel With 2 Loop Cards - Large Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13Please note The image is for illustrative purposes only.

GBP 1600.34
1

Advanced MX-5404E 1-4 Loop Fire Panel With 4 Loop card - Extended Enclosure - Apollo Hochiki Protocol

Advanced MX-5404E 1-4 Loop Fire Panel With 4 Loop card - Extended Enclosure - Apollo Hochiki Protocol

Advanced MX-5404E 1-4 Loop Fire Panel With 4 Loop card - Extended Enclosure - Apollo Hochiki ProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.NetworkSimply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSgraphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13

GBP 2685.85
1

Advanced MX-5402D 1-4 Loop Fire Panel With 2 Loop Card - Deep Enclosure - Apollo Hochiki Protocol

Advanced MX-5402D 1-4 Loop Fire Panel With 2 Loop Card - Deep Enclosure - Apollo Hochiki Protocol

Advanced MX-5402D 1-4 Loop Fire Panel With 2 Loop Card - Deep Enclosure - Apollo Hochiki ProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.Network Simply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSgraphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key Features 20 programmable Zonal 25 System LEDs. Apollo Argus Vega Hochiki Nittan Evolution protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dedicated USB RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn Loop Detection and On-board Scope facility for ease of commissioning and fault finding. The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones Approved to BS EN54 part 2 4 and 13

GBP 2152.88
1

Advanced MX-5401ND 1-4 Loop Fire Panel cw 1 Loop Card - Deep Enclosure - Nittan Evolution Protocol

Advanced MX-5401ND 1-4 Loop Fire Panel cw 1 Loop Card - Deep Enclosure - Nittan Evolution Protocol

Advanced MX-5401ND 1-4 Loop Fire Panel cw 1 Loop Card - Deep Enclosure - Nittan Evolution ProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.Network Simply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSgraphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13.

GBP 1961.23
1

Advanced MX-5402N 1-4 Loop MxPro5 Fire Control Panel with 2 Loop Cards Nittan Evolution Protocol

Advanced MX-5402N 1-4 Loop MxPro5 Fire Control Panel with 2 Loop Cards Nittan Evolution Protocol

Advanced MX-5402N 1-4 Loop MxPro5 Fire Control Panel with 2 Loop Cards Nittan Evolution ProtocolThe MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation.Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad or PC-NeT configuration software.PC Software An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration service logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.Network Simply adding a network card allows the panel to communicate with any other MxPro 5MxPro 4 fire panel remote terminal or network peripheral such as ipGateway or BMSgraphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Apollo Argus Vega Hochiki Nittan Evolution protocol support.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.Dedicated USB RS232 serial port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility for ease of commissioning and fault finding.The graphical display can be configured to operate with virtually any language or character set and allow the installers logo to be applied using the Logo application software.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13.

GBP 2095.55
1

Advanced MX-5401A 1-4 Loop MxPro5 Fire Control Panel With 1 Loop Card - Large Core Protocol

Advanced MX-5401A 1-4 Loop MxPro5 Fire Control Panel With 1 Loop Card - Large Core Protocol

Advanced MX-5401A 1-4 Loop MxPro5 Fire Control Panel With 1 Loop Card - Large Core ProtocolThe MxPro 5 series control panels are supplied with a single loop driver card 2 on board sounder circuits 20 programmable zonal LEDs with slide-in labels and 25 system LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation. The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution high contrast graphical LCD display and tactile keypad providing a simple select click programming aid for engineer configuration and end user operation.Powerful cause-and-effect programming coupled with dynamic zoning and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. The panel is fully programmable on-site via the on-board alphanumeric keypad or PC-NeT Configuration Software. An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels.The suite incorporates a number of different programmes which include configuration service logo and virtual panel tools to allow the flexibility of the equipment to be fully explored. Simply adding a network card allows the panel to communicate with any other MxPro 5 fire panel remote terminal or network periferal such as ipGateway BMS or graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault tolerant loop or radial format.Key Features20 programmable Zonal 25 System LEDs.Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing fullEN54 compliance without additional hardware.Dedicated USB RS232 Serial Port for direct PC or modem connection.Installer friendly Auto-learn Loop Detection and On-board Scope facility.Graphical display configurable for virtually any language.Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination.Integral P-Bus for system expansion via available option cards.Ad-NeT peer-to-peer network with up to 2000 zonesApproved to BS EN54 part 2 4 and 13Please note The image is for illustrative purposes only.

GBP 1903.88
1