KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

BGL Lock Nut KMT64

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 64 ID - Inner Diameter M320 x 5mm OD - Outer Diameter 390mm Width 45mm Weight (kg) 12.7

GBP 1499.99

1

BGL Lock Nut KMT38

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 38 ID - Inner Diameter M190 x 3mm OD - Outer Diameter 214mm Width 32mm Weight (kg) 2.255

GBP 299.99

1

BGL Lock Nut KMTA34

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 34 ID - Inner Diameter M170 x 3mm OD - Outer Diameter 215mm Width 32mm Weight (kg) 3.21

GBP 269.99

1

BGL Lock Nut KMTA6

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 6 ID - Inner Diameter M30 x 1.5mm OD - Outer Diameter 48mm Width 32mm Weight (kg) 0.15

GBP 49.99

1

BGL Lock Nut KMT10

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 10 ID - Inner Diameter M50 x 1.5mm OD - Outer Diameter 68mm Width 25mm Weight (kg) 0.4

GBP 55.99

1

BGL Lock Nut KMT6

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 6 ID - Inner Diameter M30 x 1.5mm OD - Outer Diameter 49mm Width 20mm Weight (kg) 0.15

GBP 42.99

1

BGL Lock Nut KMT32

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 32 ID - Inner Diameter M160 x 3mm OD - Outer Diameter 184mm Width 32mm Weight (kg) 1.89

GBP 229.99

1

BGL Lock Nut KMTA26

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 26 ID - Inner Diameter M130 x 3mm OD - Outer Diameter 165mm Width 32mm Weight (kg) 2

GBP 209.99

1

BGL Lock Nut KMTA7

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 7 ID - Inner Diameter M35 x 1.5mm OD - Outer Diameter 53mm Width 32mm Weight (kg) 0.175

GBP 59.99

1

BGL Lock Nut KMTA28

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 28 ID - Inner Diameter M140 x 3mm OD - Outer Diameter 180mm Width 32mm Weight (kg) 2.125

GBP 219.99

1

BGL Lock Nut KMTA18

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 18 ID - Inner Diameter M90 x 2mm OD - Outer Diameter 120mm Width 32mm Weight (kg) 1.125

GBP 183.99

1

BGL Lock Nut KMTA38

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 38 ID - Inner Diameter M190 x 3mm OD - Outer Diameter 240mm Width 32mm Weight (kg) 4.1

GBP 319.99

1

BGL Lock Nut KMT19

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 19 ID - Inner Diameter M95 x 2mm OD - Outer Diameter 120mm Width 32mm Weight (kg) 1.205

GBP 159.99

1

BGL Lock Nut KMT11

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 11 ID - Inner Diameter M55 x 2mm OD - Outer Diameter 78mm Width 25mm Weight (kg) 0.49

GBP 63.99

1

BGL Lock Nut KMTA20

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 20 ID - Inner Diameter M100 x 2mm OD - Outer Diameter 130mm Width 32mm Weight (kg) 1.13

GBP 199.99

1

BGL Lock Nut KMT4

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 4 ID - Inner Diameter M20 x 1mm OD - Outer Diameter 40mm Width 18mm Weight (kg) 0.105

GBP 41.99

1

BGL Lock Nut KMTA12

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 12 ID - Inner Diameter M60 x 1.5mm OD - Outer Diameter 84mm Width 24mm Weight (kg) 0.42

GBP 79.99

1

BGL Lock Nut KMT1

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 1 ID - Inner Diameter M12 x 1mm OD - Outer Diameter 25mm Width 14mm Weight (kg) 0.055

GBP 41.99

1

BGL Lock Nut KMTA17

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 17 ID - Inner Diameter M85 x 2mm OD - Outer Diameter 115mm Width 32mm Weight (kg) 1.05

GBP 129.99

1

BGL Lock Nut KMTA5

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 5 ID - Inner Diameter M25 x 1.5mm OD - Outer Diameter 42mm Width 32mm Weight (kg) 0.125

GBP 49.99

1

BGL Lock Nut KMTA40

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 40 ID - Inner Diameter M200 x 3mm OD - Outer Diameter 245mm Width 32mm Weight (kg) 3.85

GBP 349.99

1

BGL Lock Nut KMT8

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 8 ID - Inner Diameter M40 x 1.5mm OD - Outer Diameter 65mm Width 22mm Weight (kg) 0.27

GBP 52.99

1

BGL Lock Nut KMTA32

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 32 ID - Inner Diameter M160 x 3mm OD - Outer Diameter 205mm Width 32mm Weight (kg) 2.715

GBP 249.99

1

BGL Lock Nut KMT15

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMT 15 ID - Inner Diameter M75 x 2mm OD - Outer Diameter 97mm Width 28mm Weight (kg) 0.72

GBP 99.99

1

BGL Lock Nut KMTA8

Used to fasten bearings in machines and equipments that require extreme precision, such as: lathes, grinders and milling machines.For locking the shaft, these nuts have three angularly distributed bolts, which are pressed together against the shaft by screws. The bolts have slope equal to the angle of the thread, causing that the nut be not subjected to axial loads, allowing the locking of the nut into the exact grip position.Material: Carbon steel with phosphate finish. Specifications: Brand BGL MPN KMTA 8 ID - Inner Diameter M40 x 1.5mm OD - Outer Diameter 58mm Width 32mm Weight (kg) 0.2