33 results (0,16913 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

DeWalt Jobsite Wireless Earphones

DeWalt Jobsite Wireless Earphones

DEWALT Jobsite Wireless Earphonesare durable and water-resistant. IPX6 sealed to withstand sweat and moisture while maintaining peak audio performance.Its 9mm drivers provide exceptional audio quality.Equipped with built-in volume, playback controls and Bluetooth 5.0 technology so you can conveniently pair these earphones with a wide variety of devices.Extra ear cushions and shirt clip included.DEWALT Mobile Solutions are built with superior components so every workday is worry-free.

GBP 59.99
1

DeWalt Fast Wireless Charging Pad

DeWalt Fast Wireless Charging Pad

The DEWALT Fast Wireless Charging Pad can charge any Qi-compatible device.Its durable design incorporates anon-slipbase and a Type C input. Perfect for jobsite professionals to use on and off the jobsite.Supplied with aKevlar reinforced cable, designedto withstand repeated bending and flexing. A single-piece strain relief, which reduces pressure on the connector and increases the lifespan of the cable.It also comes with aQuick Charge Power Adaptor, this enables this pad to rapidly recharge compatible devices.DEWALT Mobile Solutions are built with superior components so every workday is worry-free.

GBP 53.99
1

DeWalt Jobsite Pro Wireless Neckband Earphones

DeWalt Jobsite Pro Wireless Neckband Earphones

DEWALT Jobsite Pro Wireless Neckband Earphones are durable and water-resistant.IPX6 sealed to withstand sweat and moisture.The flexible neckband rests comfortably behindyour neck and features built-in volume, playbackcontrols andadjustable cable stays. Its9mm drivers provideexceptional audio quality.Equipped with Bluetooth 5.0 technology and a microphone so you can listen to music and take calls throughout the workday.Additional ear cushions and fins are includedto further customize the fit to your preference.DEWALT Mobile Solutions are built with superior components so every workday is worry-free.

GBP 109.99
1

DeWalt Jobsite Pro-X1 True Wireless Earbuds with Charging Case

DeWalt Jobsite Pro-X1 True Wireless Earbuds with Charging Case

DEWALT Jobsite Pro-X1 True Wireless Earbudsare equipped with Bluetooth 5.0 technology, allowing you to stay connected on any jobsite.Durable and water-resistant, IPX6 sealed to withstand sweat and moisture.Long battery life and outstanding sound make these lightweight earbuds a jobsite must-have.The In-Ear Smart Sensor allows earbuds to sense when they are being worn, automatically pausing when removed and resuming play when replaced.Store andrecharge the earbuds multiple times with the rugged charging case, and enjoy up to 30 hours of runtime. A USB C port allows for fast charging.Includes extra ear cushions and a Type C charging cable.DEWALT Mobile Solutions are built with superior components so every workday is worry-free.

GBP 159.99
1

DeWalt DCS781X2 XR FlexVolt Mitre Saw 305mm 54V 2 x 3.0Ah Li-ion DEWDCS781X2

DeWalt DCS781X2 XR FlexVolt Mitre Saw 305mm 54V 2 x 3.0Ah Li-ion DEWDCS781X2

The DEWALT DCS781 XR FlexVolt Mitre Saw has been designed, machined and checked to the highest standards. Its cam action mitre lock function allows the user to quickly adjust the angle between 0-50 left and 0-60 right.Its large dual sliding fence provides maximum material support at any angle, whilst the 20mm horizontal rail with three linear roller bearings provide smooth movement without compromising reliability. Machined side handles, meet latest IEC table requirements, improve portability and handling.The XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity. AIRLOCK compatible dust extraction, for improved cut line visibility and a cleaner working area. Compatible with the Wireless Tool Control system. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Specifications: No Load Speed: 3,800/min.Blade: 305 x 30mm Bore.Capacity: 90 112 x 278mm, 45 112 x 196.5mm.Max. Mitre Angle (Left/Right): 50 / 60.Max. Bevel Angle (Left/Right): 48 / 48.Weight: 22kg.

GBP 1299.99
1

DeWalt DWH161N XR Universal Dust Extractor 18V Bare Unit DEWDWH161N

DeWalt DWH161N XR Universal Dust Extractor 18V Bare Unit DEWDWH161N

The DEWALT DWH161 XR Universal Dust Extractor has a high-quality, washable HEPA filter capable of achieving 99.5% efficiency to ensure a safe and clean working environment. Suitable for use with all SDS Plus rotary hammers and many other tools. It has a lightweight, compact design and is fitted with an adjustable, padded shoulder strap for easy transportation around the worksite. The extractor continues to operate for 2 seconds after the tool trigger is released to ensure any debris is completely removed from the hose (when paired with Wireless Tool Control). Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Bare Unit - No Battery or Charger supplied. Supplied with 1 x 1m Flexible Anti-Static Hose, 1 x Adjustable Shoulder Strap, 1x Stepped Hose Adaptor, 1x Crevice Tool and 1 x Belt Hook. Specification Max. Airflow 9.1 L/sec Tank Capacity 0.21 litre Hose Length 1m Hose Diameter 31mm Weight 1.7kg

GBP 199.99
1

DeWalt DCS781N XR FlexVolt Mitre Saw 305mm 54V Bare Unit DEWDCS781N

DeWalt DCS781N XR FlexVolt Mitre Saw 305mm 54V Bare Unit DEWDCS781N

The DEWALT DCS781 XR FlexVolt Mitre Saw has been designed, machined and checked to the highest standards. Its cam action mitre lock function allows the user to quickly adjust the angle between 0-50 left and 0-60 right.Its large dual sliding fence provides maximum material support at any angle, whilst the 20mm horizontal rail with three linear roller bearings provide smooth movement without compromising reliability. Machined side handles, meet latest IEC table requirements, improve portability and handling.The XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity. AIRLOCK compatible dust extraction, for improved cut line visibility and a cleaner working area. Compatible with the Wireless Tool Control system. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Specifications: No Load Speed: 3,800/min.Blade: 305 x 30mm Bore.Capacity: 90 112 x 278mm, 45 112 x 196.5mm.Max. Mitre Angle (Left/Right): 50 / 60.Max. Bevel Angle (Left/Right): 48 / 48.Weight: 22kg.

GBP 1099.99
1

DeWalt DCH911NK XR FlexVolt SDS-Max Breaker 54V Bare Unit DEWDCH911NK

DeWalt DCH911NK XR FlexVolt SDS-Max Breaker 54V Bare Unit DEWDCH911NK

The DEWALT DCH911NK XR Flexvolt SDS-Max Breaker is equipped with 12 chisel positions, an electronic 2-stage speed and impact energy selector for complete operator control. It features a D handle for comfortable downward working and a floating mechanism that reduces chiselling vibration levels to approximately 6m/s2, allowing for longer periods of work with this large cordless breaker. Additionally, it is compatible with Wireless Tool Control, which enables the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shutdown via the app. The DEWALT DCH911NK comes as a Bare Unit, without a battery or charger included. Specifications: - Tool Holder: SDS-Max. - No Load Speed: 1, 350-1, 620/min. - Impact Energy: 27 Joules. - Weight: 12.5kg (excluding battery) .

GBP 899.99
1

DeWalt Bluetooth Neckband Earphones

DeWalt Bluetooth Neckband Earphones

LIGHTWEIGHT & COMFORTABLE WIRELESS NECKBAND: Flexible neckband adjusts to your comfort level making these wrap around headphones ideal for jobsite use EASE OF USE BLUETOOTH WIRELESS HEADSET: Integrated volume and playback controls allow you to intuitively change songs and volume even when your hands are gloved 15+ HOUR PLAYTIME: This Bluetooth headset with microphone lasts all-day long so you can listen to music and take calls throughout the workday WATER-RESISTANT EARBUDS: Rated IPX6 for water resistance, these DEWALT headphones are ideal for hard work, sports, or just your day-to-day life CUSTOM-FIT EARBUD HEADSET: Includes extra, interchangeable ear cushions if you need neckband earbuds for small ear canals or large ear canals along with a Type C charging cable

GBP 102.99
1

DeWalt DCH892N XR FlexVolt SDS Max Chipping Hammer 54V Bare Unit DEWDCH892N

DeWalt DCH892N XR FlexVolt SDS Max Chipping Hammer 54V Bare Unit DEWDCH892N

The DEWALT DCH892 XR FlexVolt SDS Max Chipping Hammer has been designed to tackle a variety of demolition jobs. Engineered for fast chipping on hard concrete, its brushless motor can handle a wide variety of applications whilst maintaining a consistent speed under load with constant-speed electronics. Built for comfortable operation, an anti vibration system helps reduce vibration felt by the user at the handles. This highly maneuverable, midweight tool can be used for can be used for horizontal chipping in upper or lower wall areas and concrete surface preparation applications. Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Comes as a Bare Unit, NO battery or charger supplied. Specification Impact Rate 0-2,210/bpm Impact Energy 19.4 joules Weight 8.9kg

GBP 759.99
1

DeWalt DCH832N XR FlexVolt SDS Max Chipping Hammer 54V Bare Unit DEWDCH832N

DeWalt DCH832N XR FlexVolt SDS Max Chipping Hammer 54V Bare Unit DEWDCH832N

The DEWALT DCH832N XR FlexVolt SDS Max Chipping Hammer has been designed to tackle a variety of demolition jobs, and ngineered for fast chipping on hard concrete. The brushless motor can handle a wide variety of applications, while maintaining a consistent speed under load with constant-speed electronics. Built for comfortable operation, the 54V XR FlexVolt anti vibration system helps reduce vibration felt by the user through the handles. This highly maneuverable, 6.5kg midweight tool can be used for horizontal chipping in upper or lower wall areas, and concrete surface preparation applications. The hammer has Wireless Tool Control compatible, allowing the tool to be wirelessly paired with another Wireless Tool Control enabled device, for automatic activation and shut down via the app. Comes as a Bare Unit, NO battery or charger supplied. Specification Impact Rate 0-2,900/bpm. Impact Energy 10.5 joules. Weight 6.5kg.

GBP 0.00
1

DeWalt D25614K SDS Max Combination Hammer 110V 1350W DEWD25614KL

DeWalt D25614K SDS Max Combination Hammer 110V 1350W DEWD25614KL

The DEWALT D25614K SDS Max Combination Hammer is ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 45mm in diameter. With electronic speed and impact energy control. It has a rotation stop mode with a lock-on switch for chiselling. The ergonomic, compact and slimline design maximises control and offers easy access to confined spaces. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power. Tool Connect ready (tag is NOT included) provides the option for jobsite connectivity for inventory management. Compatible with the Wireless Tool Control transmitter, which allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down. Specifications: Input Power: 1350W.No Load Speed: 190-380/min.Impact Rate: 1,450-2,900/bpm.Impact Energy: 10.5 joules.Max. Drilling Diameter: 45mm.Max. Core Diameter: 125mm.

GBP 559.99
1

DeWalt D25614K SDS Max Combination Hammer 240V 1350W

DeWalt D25614K SDS Max Combination Hammer 240V 1350W

The DEWALT D25614K SDS Max Combination Hammer is ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 45mm in diameter. With electronic speed and impact energy control. It has a rotation stop mode with a lock-on switch for chiselling. The ergonomic, compact and slimline design maximises control and offers easy access to confined spaces. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power. Tool Connect ready (tag is NOT included) provides the option for jobsite connectivity for inventory management. Compatible with the Wireless Tool Control transmitter, which allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down. Specifications: Input Power: 1350W.No Load Speed: 190-380/min.Impact Rate: 1,450-2,900/bpm.Impact Energy: 10.5 joules.Max. Drilling Diameter: 45mm.Max. Core Diameter: 125mm.

GBP 559.99
1

DeWalt DEWD25966L D25966L Hex Demolition Hammer 1800W 110V

DeWalt DEWD25966L D25966L Hex Demolition Hammer 1800W 110V

DEWD25966L D25966L HEX Demolition Hammer 1800W 110V The DEWALT D25966L HEX Demolition Hammer delivers 41 Joules of impact energy for the toughest demolition jobs on site. Despite its high performance this demolition hammer has low vibration of 6.8m/s2 thanks to a floating mechanism. Its smaller and less intrusive tool holder offers reduced weight and improved chisel visibility. The 28mm HEX toolholder offers a wide variety of readily available accessories. It also features removeable side handles, ideal for trench work and an LED service indicator. The unit is Tool Connect tag ready (tag not included) offering the capability of supporting inventory management via the Tool Connect app. It is also Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down. Specifications: Tool Holder: 28mm Hex. Voltage: 110V. Input Power: 1, 800W. Impact Rate: 1, 080/bpm. Impact Energy: 41 Joules. Vibration Level: 6.8m/s. Weight 18.8kg.

GBP 1299.99
1

DeWalt DCW200N XR Brushless 1/4 Sheet Palm Sander 18V Bare Unit DEWDCW200N

DeWalt DCW200N XR Brushless 1/4 Sheet Palm Sander 18V Bare Unit DEWDCW200N

The DEWALT DCW200 XR Brushless 1/4 Sheet Palm Sander utilises cordless technology for more user freedom. Its brushless motor offers superb run time and durability. A dust-sealed switch and dust-sealed bearings provide prolonged product life. A textured anti-slip top and body grip provide ultimate comfort and control during use. Fitted with a hook & loop platen that provides faster paper changes, better dust extraction and increase sanding efficiency. Paper clamps are also provided for conventional abrasives. The Airlock dust port allows for a secure connection between the tool and dust extractor, keeping the working area clean and free from debris. It is also Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Bare Unit - No Battery or Charger supplied. Specification Oscillating Speed 8,000-13,500/min. Paper Size 140 x 115mm. Pad Size 108 x 115mm.

GBP 132.99
1

DCH614N 54V XR FlexVolt SDS Max Hammer Drill (Body Only)

DCH614N 54V XR FlexVolt SDS Max Hammer Drill (Body Only)

The Dewalt DCH614 SDS max hammer drill is able to deliver power equal to that of a corded machine This extremely powerful SDS Max hammer drill is suitable for all heavy duty demolition, chipping and drilling applications. The fully brushless motor provides outstanding power output and runtime when drilling anchors and fixing holes into concrete, brick and masonry up to 45mm in diameter. This model is Tool Connect ready (Tag NOT included) which provides the user with the option for job site connectivity for inventory management. This product is sold without batteries and charger. Features: This model delivers true corded performance in a cordless form Brushless motor for improved runtime and reduced maintenance Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 45mm in diameter Ergonomic, compact and slimline design maximises control and offers easy access to confined spaces Rotation stop mode with lock-on switch for chiselling Electronic speed and impact energy control Perform & Protect: low vibration at 8.8m/s, minimising user fatigue Anti-rotation system detects a loss of tool control and reacts by instantly cutting the power Wireless Tool Control transmitter which allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down Tool Connect ready (tag is NOT included) provides the option for job site connectivity for inventory management Specification: Power: 54V Impact Energy (EPTA): 10.5J No-Load RPM: 190-380 No-Load BPM: 1450-2900 Max Drilling Dia. (mm): 45 Max Diam. Core (mm): 125 Rotation Control: Yes Wireless Tool Control: Yes Vibration (Drilling) m/s: 8.8 Vibration (Chipping) m/s: 8.1 Variable Speed Dial: Yes

GBP 0.00
1

DeWalt DCH735N XR FlexVolt SDS Max Drill 54V Bare Unit DEWDCH735N

DeWalt DCH735N XR FlexVolt SDS Max Drill 54V Bare Unit DEWDCH735N

The DEWALT DCH735 XR FlexVolt SDS Max Drill offers 2 modes of operation hammer drilling and rotation-stop for demolition applications in brick, masonry and light chasing in concrete. Ideal for drilling anchor fixing and through-holes in concrete and masonry up to 48mm in diameter and core drilling up to 125mm. Its brushless motor provides improved run time and reduced maintece. With electronic speed and impact energy control. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power. Its active vibration control system incorporates a floating handle that delivers extremely low vibration of 9.6m/s when drilling in concrete and 9m/s when in chiselling mode. Reduces fatigue whilst increasing safety, comfort and productivity. For added safety, there are service and anti-rotation system LED indicators. Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Supplied as a Bare Unit - No Battery or Charger. Specification No Load Speed 177-355/min. Impact Rate 1,350-2,705/bpm Impact Energy 13.3 joules Max. Drilling Capacity Concrete 48mm, Core Bit 125mm Weight 8.5kg (without battery)

GBP 849.99
1

DeWalt DCH775N XR FlexVolt SDS Max Rotary Hammer 54V Bare Unit

DeWalt DCH775N XR FlexVolt SDS Max Rotary Hammer 54V Bare Unit

The DEWALT DCH775 XR FlexVolt SDS Max Rotary Hammer offers 2 modes of operation: hammer drilling and rotation-stop for demolition applications in brick, masonry and light chasing in concrete. Ideal for drilling anchor fixing and through-holes in concrete and masonry up to 52mm in diameter and core drilling up to 150mm. Its brushless motor provides improved run time and reduced maintenance. With electronic speed and impact energy control. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power. Its active vibration control system incorporates a floating handle that delivers extremely low vibration of 9.6m/s when drilling in concrete and 9m/s when in chiselling mode. Reduces fatigue whilst increasing safety, comfort and productivity. For added safety, there are service and anti-rotation system LED indicators. Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 145-290/min.Impact Rate: 1,105-2,210/bpmImpact Energy: 19.4 joulesMax. Drilling Capacity: Concrete 52mm, Core Bit 150mmWeight: 9.4kg (without battery)

GBP 929.99
1

DeWalt DEWDCH966Z2 DCH966Z2 XR FlexVolt Demolition Hammer 54V 1 x 5.0Ah Li-ion

DeWalt DEWDCH966Z2 DCH966Z2 XR FlexVolt Demolition Hammer 54V 1 x 5.0Ah Li-ion

DEWDCH966Z2 DCH966Z2 XR FlexVolt Demolition Hammer 54V 1 x 5.0Ah Li-ion The DEWALT DCH966 XR FlexVolt Demolition Hammer delivers corded performance with the freedom of being cordless. Its brushless motor offers increased run time and durability with reduced maintenance. Despite its high performance this demolition hammer has low vibration of 6.1m/s2 thanks to a floating mechanism. Minimising user fatigue and increasing productivity. Its smaller and less intrusive tool holder offers reduced weight and improved chisel visibility. The 28mm HEX tool holder offers a wide variety of readily available accessories. It also features removable side handles, ideal for trench work and an LED service indicator. The unit is Tool Connect tag ready (tag not included) offering the capability of supporting inventory management via the Tool Connect app. It is also Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control device, such as a dust extractor, for automatic activation and shut down. Compatible with DWH052 dust extraction adaptor (not included) for dust-free operation. Supplied with: 1 x Multi Position Side Handle, 1 x 28mm HEX Flat Chisel, 1 x Multi-Voltage Charger and 1 x 1 x DCB549 XR FlexVolt Slide Battery 18/54V 15.0/5.0Ah. Specifications: Tool Holder: 28mm Hex. Impact Rate: 1, 080/bpm. Impact Energy: 41 Joules. Vibration Level: 6.1m/s. Weight 18.6kg.

GBP 2099.99
1

DeWalt DCD150NK XR FlexVolt Diamond Drill 54V Bare Unit

DeWalt DCD150NK XR FlexVolt Diamond Drill 54V Bare Unit

The DEWALT DCD150 XR FlexVolt Diamond Drill has a powerful brushless motor and 3 speed gear box, provides maximum performance. It's easy to select the correct speed/core size thanks to the 3 mode selector switch.Wireless Tool Control compatible. This allows the extractor to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app.Works with WTC water supply or dust extraction. Compatible with the DEWALT DCPS151 POWERSHIFT Core Drill Stand (Sold Separately).Specifications:Core Bit Connection: 1 UNC (external) / BSP (internal).No Load Speed: 0-450/0-900/0-1,400/min.Max. Core Drilling Diameter: 162mm.Weight: 4.1kg.

GBP 899.99
1

DeWalt DCS520NT-XJ 54V XR Flexvolt Plunge Saw Bare Unit in Tstack

DeWalt DCS520NT-XJ 54V XR Flexvolt Plunge Saw Bare Unit in Tstack

The 54V XR FLEXVOLT 165mm Plunge Saw delivers powerful, precise cutting for professional applications, including trimming, plunge cutting, and sheet cutting. Featuring a 42-tooth blade, anti-kickback function, and track compatibility, it ensures smooth, controlled cuts. Wireless Tool Control enables cordless connectivity with compatible DEWALT extractors. Features and Benefits Anti-kickback function for enhanced safety and control Parallel plunge for a steady hand position Variable speed for different materials 55mm max cutting depth for versatile applications 90% dust extraction with enclosed guard Compatible with DEWALT AirLock system for secure dust extraction Cordless with XR FLEXVOLT power for freedom and performance Notes Batteries and charger sold separately

GBP 549.99
1

DeWalt DCV586MT2 Flexvolt 54V XR M-Class Dust Extractor with 2 6.0AH Battery

DeWalt DCV586MT2 Flexvolt 54V XR M-Class Dust Extractor with 2 6.0AH Battery

The DeWalt 54V M-Class dust extractor uses a powerful 2000W brushless motor and certified M-Class filters with automatic cleaning provides consistent performance and long run times. The filter is cleaning every 30 seconds to reduce clogging and deliver consistent airflow. T-STAK compatibility allows for easy enhanced mobility and flexible storage. The dust extractor also features wireless activation with the use of a key fob remote saving time and effort. Features and Benefits Brushless 2000W provides strong and constant airflow to make for quick work Automatic filter cleaning reduces clogging and provides strong suction T-STAK compatibility allows for easy enhanced mobility and flexible storage

GBP 799.99
1