12 results (0,13354 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

XPZ730 Dunlop Standard Raw Edge Belt

XPZ730 Dunlop Standard Raw Edge Belt

Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.

GBP 0.00
1

XPZ1400 Dunlop Standard Raw Edge Belt

XPZ1400 Dunlop Standard Raw Edge Belt

Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.

GBP 4.99
1

SPB1250 Standard Wrapped Wedge Belts - SPB (16.3MM X 13MM)

SPB1250 Standard Wrapped Wedge Belts - SPB (16.3MM X 13MM)

Wrapped wedge belts are designated by letters standing for their cross-section, e.g. SPA followed by a number e.g. 1600 which specifies the belts pitch length Lp in mm. Due to their high power ratings savings can be made over classical v-belts, smaller pulley diameters and reduced numbers of belts and be incorporated into more compact drives. Wedge belts are produced to BS3790, DIN 7753 and AFOR T 47-117 standards. MECHANICAL FEATURES: Smooth starting and running. Wide range of drive speeds, using standard electric motors. Low maintenance. Highly efficient. No need for lubrication. Extremely wide horsepower ranges. Dampen vibration between driver and driven pulleys. Silent operations. Long Service Life. Easy Installation. Reduction in drive dimension. CHEMICAL FEATURES: Working temperature range -30 C to +80 C. Resistance to oil and heat. Antistatic properties to ISO 1813. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION

GBP 0.00
1

A99 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 2515MM

A99 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 2515MM

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment. Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. MECHANICAL FEATURES: Smooth starting and running. Wide range of drive speeds, using standard electric motors. Low maintenance. Highly efficient. No need for lubrication. Extremely wide horsepower ranges. Dampen vibration between driver and driven pulleys. Silent operations. Long Service Life. Easy Installation. Reduction in drive dimension. CHEMICAL FEATURES: Working temperature range -30 C to +80 C. Resistance to oil and heat. Anti-static properties to ISO 1813. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 0.00
1

A104 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 2642MM

A104 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 2642MM

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment. Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. MECHANICAL FEATURES: Smooth starting and running. Wide range of drive speeds, using standard electric motors. Low maintenance. Highly efficient. No need for lubrication. Extremely wide horsepower ranges. Dampen vibration between driver and driven pulleys. Silent operations. Long Service Life. Easy Installation. Reduction in drive dimension. CHEMICAL FEATURES: Working temperature range -30 C to +80 C. Resistance to oil and heat. Anti-static properties to ISO 1813. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 0.00
1

A71 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 1803MM

A71 Standard Drive V-Belt Wrapped - Section A (13MM X 8MM) Inside Length 1803MM

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment. Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. MECHANICAL FEATURES: Smooth starting and running. Wide range of drive speeds, using standard electric motors. Low maintenance. Highly efficient. No need for lubrication. Extremely wide horsepower ranges. Dampen vibration between driver and driven pulleys. Silent operations. Long Service Life. Easy Installation. Reduction in drive dimension. CHEMICAL FEATURES: Working temperature range -30 C to +80 C. Resistance to oil and heat. Anti-static properties to ISO 1813. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 0.00
1