KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Elmdene SPLITTER-8 1 To 8 Way PSU Splitter 2.1mm

Elmdene SPLITTER-8 1 To 8 Way PSU Splitter 2.1mmAn 1 to 8 way PSU splitter.Key Features2.1mmTypically used with Encapsulated CCTV Power Supplies

GBP 3.94

1

Elmdene MFR-1 Mains Fail Relay For Use With Any PSU

Elmdene MFR-1 Mains Fail Relay For Use With Any PSUStand-alone Mains Fail Relay provides a volt free fault output for remote signalling of a mains fail condition.Key FeaturesInstantly detects loss of mainsNC contacts rated at 8A 27.6VCan be fitted to most Elmdene boxed 12 24V Power SuppliesNormally closed volt free contact opens on mains failureSupplied with choice of stand-offsMaximum Supply Voltage 230Vac - 10Maximum Switching Current 8A 27.6V dcOperating Temperature -10 to 40CDimensions 65L x 60W x 30D

GBP 18.79

1

Elmdene VR2440-P 24V a.c. Vision PSU 4Amp - 1 x Fused Output IP66 Rated

Elmdene VR2440-P 24V a.c. Vision PSU 4Amp - 1 x Fused Output IP66 RatedElmdenes popular 24V ac CCTV range of power supplies consists of both low-profile and IP6668 variants. The units are available in various power ratings up to 16A with options of individually fused output circuits. They have been specifically designed for CCTV applications providing enough power to control multiple PTZ cameras heaters IR illumination etc.Individual fused output versions can provide isolation of selected circuits when servicing or in the event one circuit fails allowing the rest of the system to operate normally maintaining system integrity.Units feature fuse health LEDs which are illuminated to show that each powered circuit is functioning correctly.Each fused output circuit may have different value fuses to suit the individual loads eg cameras heaters etc.Key Features1 x Fused Output24V a.c. Vision PSU 4AmpIdeal for CCTVIP66 ratedABS box 180h x 182w x 90d24V ac outputLow profile metal boxed 2A 4A 6A versionIP6668 version available - external applicationsSingle or multi-fused output optionsSafety thermal cut-outIndividual fuse health LEDs3-year warrantyPlease note The image is for illustrative purposes only.

GBP 58.19

1

Elmdene G2410BM-H PSU 27.6V 300W - Selectable LoadCharge Current 10A0.7A 8A1.6A

Elmdene G2410BM-H PSU 27.6V 300W - Selectable LoadCharge Current 10A0.7A 8A1.6AThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key FeaturesOutput mains on 27.6V dc nominalLoad Output 10 Amp Optional ratings 1 2 3 5 Amp availableMax Battery Capacity H Box 2x38AhMains Supply 90 - 260V 5060HzEnvironment -10C to 40C 95RHEnclosure H - 420H x 420W x 180D Hinge LidPlease note The image is for illustrative purposes only. Please refer to the product description.

GBP 283.96

1

Elmdene 2405ST-MOD PSU

Elmdene 2405ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 156.01

1

Elmdene 2402ST-C PSU

Elmdene 2402ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features2 Independent 27.6Vdc monitored outputBattery Free operation mode available not EN54-4 compliantSelf-resetting battery fuse protectionNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VMains status indicator LED confirms mains input is presentBattery status indicator LED confirms healthy batteryFault indicator LED Yellow active on detection of output fault charger fault and mains failureFault-diagnostic indicator LED assists with identifying cause of fault visible through LidOutput 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 184.55

1

Elmdene 2405ST-K PSU

Elmdene 2405ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 245.68

1

Elmdene 2401ST-C PSU

Elmdene 2401ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 169.78

1

Elmdene 2405ST-E PSU

Elmdene 2405ST-E PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 259.36

1

Elmdene 2405ST-H PSU

Elmdene 2405ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 281.09

1

Elmdene 2402ST-K PSU

Elmdene 2402ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 197.96

1

Elmdene 2401ST-MOD PSU

Elmdene 2401ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independent 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note This image is for illustrative purposes only.

GBP 137.09

1

Elmdene 2402ST-H PSU

Elmdene 2402ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 232.69

1

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2A

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 2A BM SMPSU to fit 1 x small controller Enclosure size 275H X 330W X 80D Max battery 12V 7AhPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 89.68

1

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 2 x small or 1 x mid-sized door controllers Enclosure size 330H x 355W x 80D Max Battery 12V 17Ah.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 123.91

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)