KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU The new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 92.04

1

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 144.74

1

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUR-Enclosure 410Hx390Wx90DFits upto 2 x 12V 17Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36

1

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 126.43

1

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.57

1

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 127.46

1

Elmdene G1224-84N-4-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 4-way Fused Outputs - C-Enclosure

Elmdene G1224-84N-4-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 4-way Fused Outputs - C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUwith 4-way Fused OutputsC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.82

1

Elmdene G1224-84N-8-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 8-way Fused Outputs - C-Enclosure

Elmdene G1224-84N-8-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU with 8-way Fused Outputs - C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUwith 8-way Fused OutputsC-Enclosure 275Hx330Wx80DFits upto 2 x12V 7Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36

1

Elmdene G13805NU 12V Switch Mode Power Supply Unit 5A Module Only

Elmdene G13805NU 12V Switch Mode Power Supply Unit 5A Module OnlyThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty13.8V dc 5A to load Battery Charging Unboxed Module Only SMPSUDIN rail mountable152L x 106W x 71DPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 93.83

1

Elmdene G13804N-B 12V Switch Mode Power Supply Unit 4A B-Box

Elmdene G13804N-B 12V Switch Mode Power Supply Unit 4A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 4Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 91.22

1

Elmdene G13805N-C 12V Switch Mode Power Supply Unit 5A C-Box

Elmdene G13805N-C 12V Switch Mode Power Supply Unit 5A C-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 5Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 108.01

1

Elmdene G13805N-B 12V Switch Mode Power Supply Unit 5A B-Box

Elmdene G13805N-B 12V Switch Mode Power Supply Unit 5A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 5Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 111.43

1

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4A

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty4Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 101.52

1

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3A

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Multi LED status indication.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lid.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.70

1

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2A

Elmdene ACCESS-PSU Access Control Small Enclosure 13.8Vdc 2AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 2A BM SMPSU to fit 1 x small controller Enclosure size 275H X 330W X 80D Max battery 12V 7AhPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 89.68

1

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU2 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 4 x small or 2 x mid-sized door controllers. Enclosure size 500H x 400W x 80D Max Battery 12V 17AhPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 171.85

1

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4A

Elmdene ACCESS-PSU1 Access Control Mid-Sized Enclosure 13.8Vdc 4AThis range has been specifically designed to house most common access control door controllers.With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models offer fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoffs supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost effective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty13.8V dc 4A BM SMPSU 4-way Fused Output Module to fit 2 x small or 1 x mid-sized door controllers Enclosure size 330H x 355W x 80D Max Battery 12V 17Ah.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 123.91

1

Elmdene 24Vdc 5A 0.5A Switch Mode Unboxed PSU Module

Elmdene 24Vdc 5A 0.5A Switch Mode Unboxed PSU ModuleHigh efficiency cost effective power supply ideal for use in Fire Access Control and General Security applications. Featuring a regulated 27.6Vdc output supplying continuous full rated current to load and up to an additional 0.5A for charging 2 x 12V standby batteries.The universal mains input voltage enables the power supply to be used across a wide geographical area. The highly efficient switch mode design ensures low operating costs while generating less heat. The modular construction simplifies maintenance.Key FeaturesUniversal mains input voltage 90-264vacAdditional 0.5A to charge 2 x 12V standby batteriesHigh efficiency electronics for reduced running costs and lower operating temperaturesContinuous full rated current to loadModular construction for ease of maintenance installationInstaller safe design with all high voltage electronics fully shroudedReverse battery connection protectionFull electronic short circuit and overload protection on load outputMains transient protection circuitGreen Mains present LEDYellow Fault LEDPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 103.44

1

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable UnboxedThe Elmdene PoE UltraPod is a unique PoE powered device that can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A.If the PoE power being provided to the input fails the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device allowing data to continue to flow.Available as a DIN rail mountable module or a boxed unit. It can be used in a variety of PoE applications such as CCTV or Access control.Installer friendly RJ45 connections are provided to off er a simple plug and play solution without the requirement of terminating Cat5 connections.Key FeaturesProvides up to 3A to the device with an additional 0.5A available for battery charging PoE requiredOffers battery back-up on loss of input PoE powerDIN rail or screw mountable moduleBoxed unit has space for 17Ah batteryBoxed unit has fixing points for commonly used access control boardsProvides remote fault monitoring outputsData pass through for IP connections 10100Mbps

GBP 113.45

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)