74 results (0,13035 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene FIREFOM-12-4 12V Interface Relay

Elmdene FIREFOM-12-4 12V Interface Relay

Elmdene FIREFOM-12-4 12V Interface RelayThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device. The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesProvides 4 individually fused outputsMultiple Trigger configurationsContact rating 8A 12V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device

GBP 20.33
1

Elmdene VRS121000EBA 12V d.c. Switch Mode PSU 1Amp

Elmdene VRS121000EBA 12V d.c. Switch Mode PSU 1Amp

Elmdene VRS121000EBA 12V d.c. Switch Mode PSU 1AmpElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.Key FeaturesEncapsulated in plastic case

GBP 19.34
1

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic Case

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic Case

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic CaseThe VRS125000EE is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.

GBP 18.17
1

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a UK plug.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeUK Plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a European plug EE.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeFitted with European plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H Box

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H Box

Elmdene G1224-84N-H Switchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSU - H BoxThe 12V G Range N Series power supply has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The product uses energy efficient switch mode technology and have a universal mains supply input.The advantage of switch mode technology is efficiency typically 80-87. This can save users money by reducing their energy bills and carbon footprint. Switch mode technology ensures lower power consumption provides cool running and energy efficiency that can result in improved long term reliability.Key FeaturesCost effective switch mode technologyFront tamper protectionModular construction means easy maintenance and upgradingIndependent ancillary relayFull rated current to load 0.5A battery chargingElectronic overload and mains transient protection3 years manufacturers warrantyEnclosure size HxWxD 420x420x180mmMax. battery 12V 1x 12V 38Ah 24V 2x 12V 38AhUnboxed module HxWxD 55x143x157mmPlease note The image is for illustrative purposes only. Please refer to the product description.

GBP 199.26
1

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused Outputs

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused Outputs

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 32.96
1

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused Outputs

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused Outputs

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 26.38
1

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU The new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 92.04
1

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models. The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded UKEBEuropean PlugEESize 120x50x30

GBP 17.81
1

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded European PlugSize 78x52x25

GBP 15.26
1

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 126.43
1

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C Enclosure

Elmdene G1224-84N-C 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU C EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 144.74
1

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R Enclosure

Elmdene G1224-84N-R 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU R EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUR-Enclosure 410Hx390Wx90DFits upto 2 x 12V 17Ah batteriesPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 168.36
1

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU UnboxedThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.67
1

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery ChargingThe ACCESS-PSU-N is part of a range of power supplies which have been specifically designed to house common access control door controllers. With different power options and enclosure sizes this range offers the installer a PSU for a variety of applications.This range offers fault signalling and can charge a 12V standby battery to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.Key Features13.8V dc outputCompact single and multi-controller enclosuresPCB mounts supplied for common controllersMains fail fault output excluding ACCESS-PSU-NTamper protectionSwitchable 12V 24V dc versions availableUniversal 90 to 264V ac mains input rangeBespoke models and branding available3 year warrantyPlease note The image is for illustrative purposes only. Please contact us for further details.

GBP 63.04
1

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module Only

Elmdene G1224-84NU 12V Switchable 8Amp 24V dc 4Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 8Amp 24V dc 4Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 127.46
1

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.57
1

Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear Lens

Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear Lens

Please noteThis product is now obsolete. We may have limited stock available pleasecontact usbefore purchasing.Elmdene LPB1224-C-S 12V-24V Low Profile High Efficiency Beacon Clear LensDual 12V24V low profile flashing beacons utilising efficient LED technology for indoor and outdoor use.Key FeaturesDual 12V24V dc modelsRed Blue Amber and Clear lens optionsIP66 ratedUses LED technology1Hz flash rateLow current operationFresnel Lens

GBP 6.59
1