8 results (0,13866 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 0.00
1

Makita TW008GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

Makita TW008GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

The Makita TW008G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square Pin Detent.No Load Speed: 0-600/1,200/1,900/2,300/min.Impact Rate: 0-1,200/1,900/2,700/2,900/bpm.Max. Torque: 760Nm.Nut Busting Torque: 1,100Nm.Bolt Capacity: Standard: M10-M24, High Tensile: M10-M16.

GBP 0.00
1

HP2050F 13mm Percussion Drill with Job Light 720W 240V

HP2050F 13mm Percussion Drill with Job Light 720W 240V

The Makita HP2050F 13mm Percussion Drill has an extra low vibration level, for comfortable and less fatigue operation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is equipped with a keyed drill chuck. The two mechanical gears and variable speed trigger makes it ideal for various materials. This model also has an LED job light. It is supplied with a side handle, depth stop and a carry case. Specification Input Power 720 Watt. No Load Speed 0-1,200/0-2,900/min. Impact Rate 0-24,000/0-58,000/bpm. Capacity Steel 13mm, Masonry 20mm, Wood 40mm. Weight 2.5kg. Vibration Drilling 2.5 m/sec. Vibration Hammer Drilling 13 m/sec. Vibration K Factor 3 m/sec. Noise Sound Power 108 dB(A).

GBP 0.00
1

DLX2455TJ 18V Combi Drill & Impact Driver Twin Pack (2 x 5.0AH Batteries) in Makpac Case

DLX2455TJ 18V Combi Drill & Impact Driver Twin Pack (2 x 5.0AH Batteries) in Makpac Case

The Makita DLX2455TJ Two piece kit contains Combi Drill DHP486 and Impact Driver DTD172 The Makita DLX2455TJ Brushless Twin Pack consists of the DHP486 Combi Drill with all-metal gear construction and the DTD172 Impact Driver with 1/4 Inch hex drive. The DHP486 Combi Drill has 21 torque settings and 2-speed settings for a controlled drilling experience, tailor-made to each application. A brushless motor ensures a long and maintenance-free tool life. The DTD172 Impact Driver has a compact tool body with a shorter overall length of 114mm and an electronic 4-stage impact power selection. They come with 2 x 5.0Ah Batteries, a Charger and a Makpac Type 3 Connector Case. Features: DHP486: Forward / reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand Electric brake 2 mechanical gears Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Brushless motor LED job light All-metal gear construction Metal gear housing DTD172: Electric brake Variable speed control by trigger Reverse switch Quick mode switching button LED job light with pre-glow and after glow function Slim tool body Anti-bit-wobbling structure Ergonomically designed handle Comes With: 2 x Belt Clips Side Handle and Depth Stop for Combi Drill 2 x 5.0Ah Batteries DC18RC Charger Makpac Case Specification: DHP486: Chuck Capacity: 1.5 - 13 mm No Load Speed (Hi): 0 - 2,100 rpm No Load Speed (Lo): 0 - 550 rpm Blows per Minute (Hi) - ipm: 0 - 31,500 ipm Blows per Minute (Lo) - ipm: 0 - 8,250 ipm Voltage: 18V Max. in wood: 76 mm Max. in masonry: 16 mm Max. in steel: 13 mm Torque Settings: 21 + Drill DTD172: Standard Bolt: M5 - M16 High Tensile Bolt: M5 - M14 Coarse thread (length): 22 - 125 mm Max Fastening Torque: 180 Nm Blows per Minute (Max) - ipm: 0 - 3,800 ipm Driving Shank: 6.35mm 1/4" Hex

GBP 0.00
1

DHP485STX5 18V LXT Combi Drill Bl (1 x 5AH)

DHP485STX5 18V LXT Combi Drill Bl (1 x 5AH)

Makita DHP485STX5 18V Combi Drill with 101 Piece Accessory Set (1 x 5.0Ah Battery) The Makita DHP485STX5 is a cordless combi drill and accessory set. This set is perfect for a variety of applications to suit any trade. The Makita DHP485 features a single sleeve keyless chuck which allows for easy bit installation and removal using only one hand and the ergonomic soft grip provides great comfort. The fully brushless motor ensures maximum power and the built-in LED job light allows for precision even in dark, hard to reach areas. Features: 2 mechanical gears Brushless motor Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Electric brake for precision work Ergonomic handle for drill-driver applications Comes With: 1 x BL1850B 5.0Ah Battery 1 x DC18SD Charger 101 Piece Accessory Set Carry Case Specification: Capacity in Steel: 13 mm No Load Speed (Lo) : 0 - 500 rpm No Load Speed (Hi) : 0 - 1, 900 rpm Capacity in Masonry: 13 mm Chuck Capacity: 1.5 - 13 mm Blows per Minute (Hi) - ipm: 0 - 28, 500 ipm Blows per Minute (Lo) - ipm: 0 - 7, 500 ipm Capacity in Wood: 38 mm Voltage: 18 v Torque Settings: 21 + drill Battery Type: Lithium-ion Vibration K factor: 1.5 m/sec Noise sound pressure: 82 dB (A) Noise sound power: 93 dB (A) Net weight: 1.5 - 1.8 kg Battery Quantity: 1 x 5.0Ah Max. Fastening Torque (Soft Joint) : 27 Nm Max. Fastening Torque (Hard Joint) : 50 Nm Vibration (Impact drilling into concrete) : 8.0 m/sec Vibration (Drilling into metal) : 2.5 m/sec Accessory Set Contains: 13 x Nutdrivers 4 x Drill Stop 1 x Hex key 2 x Screw Holders 1 x Center Punch 1 x Counter Sink 6 x Brad Point Drills 6 x HSS Drills 6 x Masonry Drills 3 x Flat Bits 5 x Hole Saws 1 x Bit Driver Handle 1 x 8" Aluminium Spirit Level 30 x 25mm Screwdriver Bits 20 x 50mm Screwdriver Bits 1 x 60mm Magnetic Bit Holder

GBP 0.00
1

Makita DLX2137PTJ 36V (18VX2) LXT 2PC Combo Kit, DC18RD (4X5AH)

Makita DLX2137PTJ 36V (18VX2) LXT 2PC Combo Kit, DC18RD (4X5AH)

This tool kit set from Makita is made up of the DHP482 combi drill, DHR263 SDS plus rotary hammer, 4 x batteries, a charger and 2 x kit boxes The Makita DLX2137PTJ Twin Pack contains two of the most popular cordless power tools along with two MakPac Carry Cases. Although the DHP482 is small it is packed with features like 21 different torque settings, hammer action and bright twin LED joblights for working in dark conditions. The DHR263 is extremely lightweight and compact yet maintains easy handling and high manoeuvrability. It features 40 different bit angle settings and 3 different operation modes making it suitable for a wide variety of applications. DHP482 Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears DHR263 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system Compact design that maintains the same easy handling and high manoeuvrability as the BHR262 LED Job light with pre-glow and afterglow functions 3 mode operation - Rotation + Hammering, Hammering only & Rotation only When different capacity batteries are used together (for example 3.0Ah and 4.0Ah) , the machine stops when the battery with less capacity gets empty One-touch slide chuck for SDS-plus bit Ergonomic soft grip Battery capacity warning lamp 40 different bit-angle settings Comes With: 4 x BL1850B 5.0Ah Batteries 1 x DC18RD Twin Charger 1 x 821551-8 MakPac Connector Case Type 3 1 x 821552-6 MakPac Connector Case Type 4 Depth Stop Side Handle Bit Grease Belt Clip DHP482 Specification: Battery Type: Li-ion Voltage: 18V Max. in Masonry: 13mm Max. in Steel: 13mm Max. in Wood: 38mm Max. Fastening Torque: S/H 36/62 Nm Chuck Capacity: 1.5 - 13mm Torque Settings: 21 + Drill No Load Speed Hi: 0 - 1, 900rpm Low: 0 - 600rpm Blows per Minute Hi: 0 - 28, 500bpm Low: 0 - 9, 000bpm Weight: 1.8kg DHR263 Specification: Voltage: 36v (18V x2) Max in concrete: 26mm Max. in steel: 13mm Max. in wood: 32mm Max in concrete (TCT core) : 54mm Max in concrete (diamond core) : 65mm Shank: SDS-PLUS Blows per minute: 0 - 4, 800bpm No Load Speed: 0-1, 200rpm Vibration K factor: 1.5m/sec Vibration: Hammer Drilling: 14.5m/sec Vibration: Chiselling: 14m/sec Vibration: Drilling into metal: 3m/sec

GBP 0.00
1

DLX2372TJ 18V LXT Rotary Hammer & Impact Wrench Twin Pack (2 x 5.0AH Batteries)

DLX2372TJ 18V LXT Rotary Hammer & Impact Wrench Twin Pack (2 x 5.0AH Batteries)

Makita DLX2372TJ 18V LXT Rotary Hammer & Impact Wrench Twin Pack (2 x 5.0Ah Batteries) The Makita DLX2372TJ Twin Pack consists of the DHR242 Rotary Hammer and the DTW300 Impact Wrench in a Makpac Connector Case with 2 x 5.0Ah Batteries and a DC18RC Charger. The Makita DHR242 is a high-performance SDS Plus Rotary Hammer with a fully brushless motor. Built for the most demanding tasks, it can drill up to 24mm in concrete with ease. The Makita DTW300 18V LXT Brushless 1/2 Inch Drive Impact Wrench is ideal for engineers and mechanics. It features a variable speed trigger and an electronic 4 stage impact power selection to suit a variety of applications. DHR242 Features: Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200 One-touch slide chuck for SDS-plus bit Easy-to-grip handle ergonomically designed to: give maximum power thrust. provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip 3 mode operation Rotation + Hammering Hammering only Rotation only The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact DTW300 Features: Electric brake Variable speed control by trigger Forward / reverse rotation LED job light Brushless motor Electronic 4 stage impact power selection Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. In full speed mode the trigger travel is shorter, the full speed is reached faster Auto-stop system available both in forward/reverse rotation modes Comes With: 2 x 5.0Ah batteries DC18RC charger 1 x Belt hook 821552-6 Connector Case (Type 4) DHR242 Specification: Capacity in Concrete: 24 mm Capacity in Steel: 13 mm Capacity in Wood: 27 mm Optimum Drilling Range: 4 - 16 mm Impact energy: 2.0 J Blows per minute: 0 - 4700 bpm No Load Speed (Hi): 0 - 950 rpm Vibration: Drilling: 3.5 m/sec Vibration K factor: 1.5 m/sec Vibration: Hammer Drilling: 13.5 m/sec Vibration: Chiselling: 10.5 m/sec Net weight: 3.2 - 3.7 kg DTW300 Specification: Driving Shank: Square Drive Standard Bolt: M10 M20 High Strength Bolt: M10 M16 Impact Power Selection: Max, Hi, Med, Soft Impacts per Minute: 0 - 4,000/ 3,400/ 2,600/ 1,800 ipm No Load Speed: 0 - 3,200/ 2,600/ 1,800/ 1,000 rpm Max Fastening Torque: 330 Nm Nut Busting Torque: 580Nm Net Weight: 1.5 1.8kg Vibration: 12.5m/s Vibration K Factor: 1.5m/s Sound Pressure Level: 97 dB(A) Sound Power Level: 108 dB(A) Sound K Factor: 3 dB(A)

GBP 0.00
1

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

This 3 piece tool kit from Makita contains a range of must-have tools for the professional trade The Makita DLX3049PTJ comes with the DHR264 Twin 18V SDS+ Rotary Hammer and the DHS710 Twin 18V Circular Saw which both accept 2 x 18V batteries making them a 36 volt cordless machine with bags and bags of power. The kit also comes with the DTD146 Impact Driver, Twin battery charger and 3 x MakPac carry cases. Contents:DHR264 twin 18V SDS+ Rotary HammerDHS710 twin 18V Circular SawDTD152 18V Impact DriverDC18RD Twin Port Battery Charger4 x BL1850 18V 5Ah Batteries2 x Type 4 MakPac Carry Cases1 x Type 3 MakPac Carry Case DHR 264 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact design that maintains the same easy handling and high manoeuvrability as the BHR262. LED Job light with pre-glow and afterglow functions 3 mode operation - Rotation + Hammering - Hammering only - Rotation only When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty. With Quick Change Chuck Ergonomic soft grip. Battery capacity warning lamp. 40 different bit-angle settings. DHS710 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact and lightweight design. Rear dust exhaust port Same depth of cut as HS7100. Durable but lightweight magnesium die-cast blade case and safety cover. Blower function to clear wood dust from cutting line. DTD152 Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit All metal gears Comes With: 4 x 5.0Ah Batteries DC18RD twin Charger 3 x Makpac Carry Cases DHR264 - Side Handle, Depth Stop, Extra Chuck 194079-2, 100ml Grease, Cloth DHS710 - Saw Blade, Hex Wrench, Rip Fence and Dust Nozzle Specification: DHR264 SDS+ Rotary Hammer: Battery type: Lithium ion Battery voltage: 2 x 18V Max. in steel: 13mm Max. in wood: 32mm Max in concrete: 26mm No load speed: 0-1,200 rpm Impacts per minute: 0-4,800bpm Chuck type: SDS plus (quick change) Operation modes: 3 modes Net weight: 4.7kg DHS710 Circular Saw: Battery type: Lithium ion Battery voltage: 2 x 18V Blade size: 190mm Bore size: 20mm Max at 0: 66mm Max at 45: 49mm Max at 50: 44mm No load speed: 4600rpm Electric brake: Yes Soft start: Yes Net weight: 4.7kg DTD152 Impact Driver: Battery Type Li-ion Voltage: 18V Driving Shank: 6.35mm (1/4 in Hex) Machine Screw: M4 - M8 Standard Bolt: M5 - M16 Coarse Thread: 22 - 125mm Impacts Per Minute: 0 - 3500 ipm No Load Speed Hi: 0 - 2900 rpm Max Tightening Torque 165 Nm Sound Pressure: 93 dB(A) Sound Power: 104 dB(A) Sound K Factor: 3 dB(A) Vibration: 10.5 m/s2 Vibration K Factor: 1.5 m/s2 Weight 1.5kg

GBP 0.00
1