33 results (0,17052 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita TW007GD201 XGT 40Vmax Bl Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TW007GD201 XGT 40Vmax Bl Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW008G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square Pin Detent.No Load Speed: 0-600/1,200/1,900/2,300/min.Impact Rate: 0-1,200/1,900/2,700/2,900/bpm.Max. Torque: 760Nm.Nut Busting Torque: 1,100Nm.Bolt Capacity: Standard: M10-M24, High Tensile: M10-M16.

GBP 949.99
1

Makita TW004GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TW004GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW004G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatigue. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square C Ring.No Load Speed: 0-1,000/1,800/2,600/3,200/min.Impact Rate: 0-1,800/2,600/3,400/4,000/bpm.Max. Torque: 350Nm.Nut Busting Torque: 630Nm.Bolt Capacity: Standard: M10-M20.

GBP 829.99
1

Makita TD001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TD001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 919.99
1

Makita TW008GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TW008GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW008G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square Pin Detent.No Load Speed: 0-600/1,200/1,900/2,300/min.Impact Rate: 0-1,200/1,900/2,700/2,900/bpm.Max. Torque: 760Nm.Nut Busting Torque: 1,100Nm.Bolt Capacity: Standard: M10-M24, High Tensile: M10-M16.

GBP 949.99
1

Makita TW001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

Makita TW001GD201 XGT 40Vmax BL Impact Wrench 40V 2 x 2.5Ah Li-ion

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 999.99
1

Makita 40VMax XGT 305mm Disc Cutter (Body Only)

Makita 40VMax XGT 305mm Disc Cutter (Body Only)

A cordless disc cutter with a blade diameter of 305mm The Makita CE004G Disc Cutter delivers robust cutting power with a lighter, cordless design, making it an ideal choice for demanding cutting applications. Equipped with a large 305mm blade and powered by Makitas 40Vmax XGT Li-Ion battery system, it offers the power of traditional engine models with reduced weight and enhanced portability. Features: Active Feedback Sensing Technology (AFT) stops the motor instantly if the blade rotation is suddenly forced to stop, enhancing operator safety Electric Brake provides a rapid stop to the blade, increasing productivity and user safety during operation It can be connected to a water supply kit, reducing dust during cutting for safer, cleaner operation Lock-Off Button prevents accidental startups The Rotatable Guard is adjustable to suit various working postures LED Job Light illuminates the work area for improved visibility in low-light conditions Specification: Voltage: 40V Max XGT Blade Diameter: 305 mm Max Depth of Cut: 121 mm Bore Size: 20/25.4 mm No Load Speed: 5000 rpm Vibration (Concrete Cutting) : 3.8/ 2.5 m/s Noise Levels: Sound Power Level (LWA) : 110 dB (A) ; Sound Pressure Level (LpA) : 99 dB (A) Dimensions: 663 x 240 x 406 mm Net Weight: 5.8 kg (6.7 - 7.7 kg with battery)

GBP 439.99
1

Makita 2012NB X 110v Planer Thicknesser with Stand (194053-0)

Makita 2012NB X 110v Planer Thicknesser with Stand (194053-0)

User Beneits: Compact and light weight (27 Kg) automatic thickness planer for easier transport. Cutterhead powered by powerful 1,650W but the lowest noise motor (83db) raises and lowers on four columns for stability. Large material capacity Unique feeding mechanism assures smoother finish with minimal snipe on stock. Downward pressure system when feeding in materials, stops sniping of the timber Double insulated automatic thickness planer with indicator lamp ready to operate. Fine depth adjustment. Depth stop can be set in any positions from 3 mm to 100mm for desired thickness of stock. STANDARD EQUIPMENT: 194053-0 Thicknesser Accessories - Stand, Wrench, Magnetic holder, Dust extraction hood.

GBP 799.99
1

Makita DSP600ZJ Brushless LXT Plunge Saw 36V (2 x 18V) Bare Unit

Makita DSP600ZJ Brushless LXT Plunge Saw 36V (2 x 18V) Bare Unit

The Makita DSP600 Brushless LXT Plunge Saw is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. It has an efficient brushless motor with a soft start feature and an electronic brake for added user safety. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation. Other features include a variable speed control dial, depth stopper for splinter free cutting and positive stop for bevel adjustment. Comes as aBare Unit, No Battery or Charger suplied. Specification: No Load Speed: 2,500-6,300/min.Blade Diameter: 165mmBore: 20mmMax. Bevel: 48Max. Cut: @0 56mm, @45 40mmWeight: 4.4kg

GBP 439.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (110V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with Avt (240V)

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion, enabling it to be used for long periods of time with little vibration transferral to hands and arms. Features: Reduced vibration for less operator fatigue (AVT) Torque-Limiter - when drill hits reinforcement the Torque-Limiter stops power 16 Angle Settings of Chisel Bit - for added control LED lights - Green drill is electrified and flashing Red signifies brushes needing changed Recessed Change Lever - mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly Constant speed underload. Rotary hammer action. Hammer only action - no hammering while idling for longer machine life Double insulated - for extra safety Comes with: 2 Side handles Depth stop Bit grease Carrying case Specification: Max in Concrete: 45mm Core Bit Diameter (TCT): 125mm Joules: 13Js Blows per minute: 1,250-2,750bpm No Load Speed: 130-280rpm Input wattage: 1,350w Vibration: 7.5m/sec HO.7.0m/sec D handle Tri-Axial Net Weight: 8.4kg

GBP 899.99
1

Makita HR3540C SDS Max Rotary Hammer 850W 110V

Makita HR3540C SDS Max Rotary Hammer 850W 110V

The Makita HR3540C SDS Max Rotary Hammer provides 3 modes of operation: Rotary drilling, Hammer drilling or Chiseling.. With electronic power control for greater comfort and a torque-limiter for additional operator protection. The drill stops when the bit hits against reinforcements. The variable speed trigger helps to provide constant speed, even under load. It is fitted with an anti-vibration system for reduced vibration for less operator fatigue. Comes with: 1 x Side Handle, 1 x Depth Stop, 1 x Bit Grease and 1 x Carrying Case. Specification: Input Power: 850WNo Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpmImpact Energy: 5.6 joulesMax. Drilling In Concrete: 35mmMax. Core Diameter (TCT): 90mm Weight: 5.2kgMakita HR3540C SDS Max Rotary Hammer 110V version.

GBP 599.99
1

Makita LS0714 Sliding Compound Mitre Saw 190mm 1010W 110V MAKLS0714N11

Makita LS0714 Sliding Compound Mitre Saw 190mm 1010W 110V MAKLS0714N11

The Makita LS0714N Sliding Compound Mitre Saw is compact and lightweight yet still boasts a powerful motor. The rails ride on linear ball bearings for extremely smooth and precise operation. A precision-machined aluminium base ensures the LS0714 produces consistent accurate cuts. While the grooving stop allows adjustment of the cutting depth, allowing for grooving and rebating applications.Its compact design makes it the ideal choice where space to store or transport is limited. Supplied with: 1 x 24 Tooth TCT Blade, 1 x Dust Bag, 1 x Vertical Vice, 1 x Socket Wrench, 1 x Holder, 1 x Triangular Rule, 2 x Lock-off Buttons and 1 x Kerf Block. Specifications: Input Power: 1,010W.No Load Speed: 6,000/min.Blade: 190 x 20mm Bore.Mitre Range: 57- 47.Mitre Cut: @90 52 x 300mm, @ 45 52 x 212mm.Weight: 13.1kg.

GBP 449.99
1

Makita LS0714 Sliding Compound Mitre Saw 190mm 1010W 240V

Makita LS0714 Sliding Compound Mitre Saw 190mm 1010W 240V

The Makita LS0714N Sliding Compound Mitre Saw is compact and lightweight yet still boasts a powerful motor. The rails ride on linear ball bearings for extremely smooth and precise operation. A precision-machined aluminium base ensures the LS0714 produces consistent accurate cuts. While the grooving stop allows adjustment of the cutting depth, allowing for grooving and rebating applications.Its compact design makes it the ideal choice where space to store or transport is limited. Supplied with: 1 x 24 Tooth TCT Blade, 1 x Dust Bag, 1 x Vertical Vice, 1 x Socket Wrench, 1 x Holder, 1 x Triangular Rule, 2 x Lock-off Buttons and 1 x Kerf Block. Specifications: Input Power: 1,010W.No Load Speed: 6,000/min.Blade: 190 x 20mm Bore.Mitre Range: 57- 47.Mitre Cut: @90 52 x 300mm, @ 45 52 x 212mm.Weight: 13.1kg.

GBP 449.99
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 899.99
1

Makita TW010GZ01 XGT 40Vmax Impact Wrench 40V Bare Unit

Makita TW010GZ01 XGT 40Vmax Impact Wrench 40V Bare Unit

TheMakita TW010G XGT 40Vmax Impact Wrench is an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. Its 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes.Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatigue. The side handle swivels 360 for greater control.XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions.The electric brake provides maximum productivity and increased operator safety. It also features twin LED lights with pre-glow and afterglow functions.Comes as a bare unit, no battery or charger supplied.Specifications:Bit Holder: 1in SquareNo Load Speed:0-600/700/850/1, 200/min.Impact Rate: 0-1, 200/1, 300/1, 500/1, 750/bpmMax. Torque: 3, 150NmNut Busting Torque: 4, 000NmBolt Capacity: Standard M27-M45, High Tensile: M20-M33Weight: 10.9kg

GBP 719.99
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 110V MAKHR4511CL

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 999.99
1

Makita DSP601ZJU Brushless LXT Plunge Saw with Wireless Unit 36V (2 x 18V) Bare Unit MAKDSP601ZJU

Makita DSP601ZJU Brushless LXT Plunge Saw with Wireless Unit 36V (2 x 18V) Bare Unit MAKDSP601ZJU

The Makita DSP600/1 Brushless LXT Plunge Saw is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. It has an efficient brushless motor with a soft start feature and an electronic brake for added user safety. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation. Other features include a variable speed control dial, depth stopper for splinter free cutting and positive stop for bevel adjustment. Comes with the Auto-Start Wireless Unit. The wireless unit connects to compatible dust extractors via Bluetooth. The dust extractor then automatically runs while the switch is on and off when the machine is switched off. Comes as a Bare Unit, NO battery or charger supplied. Specification No Load Speed 2,500-6,300/min. Blade Diameter 165mm Bore 20mm Max. Bevel 48 Max. Cut @0 56mm, @45 40mm Weight 4.4kg

GBP 449.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 599.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 619.99
1

Makita 40VMAX Rotary Hammer 2X 2.5AHBATTS DC40RA Case

Makita 40VMAX Rotary Hammer 2X 2.5AHBATTS DC40RA Case

The HR003GZ01 is a cordless SDS-Plus Rotary Hammer with a 40V Li-ion XGT battery and a powerful 40V brushless motor. It operates at up to 980rpm, 5,000bpm, delivering 2.8 J of impact energy. Featuring variable speed control, constant speed control, and three operating modes (rotary only, rotary with hammer, and hammer only), it offers versatility for different tasks. The tool includes a one-touch sliding chuck for quick bit changes, reverse rotation, depth gauge for drilling consistency, and a torque limiter to stop rotation upon hitting reinforcements. With anti-vibration technology (AVT) and a "soft no load" function to reduce motor speed during idling, it minimizes vibrations. With drilling capacities of 13mm in steel, 32mm in wood, 28mm in concrete, 54mm with TCT core, and 65mm with diamond core, the HR003GZ01 is a compact and efficient rotary hammer for various applications. Features and Benefits Lightweight Can be connected to DX12 dust extraction system (not included) One touch sliding chuck Depth gauge for increased drilling consistency Twin LED job lights to illuminate the work area Anti-Vibration Technology (AVT)

GBP 699.99
1

Makita KP312/1 110V 312MM Heavy Duty Power Planer

Makita KP312/1 110V 312MM Heavy Duty Power Planer

The Makita KP312 planer has a maximum planning width of up to 312mm to a depth of 1.5mm; this machine can also plane to a depth of 3.5mm to a maximum width of 150mm. Fitted a host of features including a front roller to help with planning over rough and un-even surfaces, the long mains lead is elevated to stop it from getting caught up in the timber being planned and as this tool will remove large amounts of wood they have increased the size of the dust extraction port to help prevent clogging. Designed for the professional market, this tool will suit people who manufacture timber frame buildings and other structural items. Features and Benefits: Powerful motor with 12,000rpm for improved performance. Large, conveniently located depth setting knob for easy adjustment. Large ejection chute provides high rate of chip discharge and helps prevent clogging from wet or dry wood chips. Front roller for easy moving rough materials. Ideal cord location helps prevent obstruction during long and repeated passes. Spring-loaded stand elevates the base to protect the blades and work piece. Guide rule for accurate and maximum use of planing width.

GBP 2299.99
1

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V MAKHR3210CL

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V MAKHR3210CL

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Input Power: 850W.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 5.0 joules.Capacity: Concrete 32mm, Core Diameter (TCT) 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 539.99
1

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Input Power: 850W.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 5.0 joules.Capacity: Concrete 32mm, Core Diameter (TCT) 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 539.99
1

Makita DHW080ZK LXT High Pressure Washer 36V (2 X 18V) Bare Unit

Makita DHW080ZK LXT High Pressure Washer 36V (2 X 18V) Bare Unit

The Makita DHW080 LXT High Pressure Washer with 2 stage pressure selection. Jet pressure can be set to high or low, ideal when cleaning a variety of surfaces or objects. The Total Stop System (TSS) switches the motor on and off when the lance trigger is operated, prolonging the motor life. It also features a self-priming function (with a max suction height of 1m) . Supplied with a storage case which can also be used as a water tank (50 litre capacity approx.) Water can also be supplied from a faucet. Due to its easy portability and water tank, the washer is useful in places where access to water or electricity is limited. Integrated wheels provide an easy mobility. WetGuard provides excellent water-resistant performance. Allows operation of the machine even when it is wet with water as long as the battery cover is closed. A battery protection circuit protects against overloading, over-discharging and over-heating. Supplied with: 1 x 123653-9 Cycle Jet Nozzle. 1 x 197810-5 Connector Set. 1 x 126766-5 High-Pressure Hose 5m. 1 x 127104-4 Storage Box/Water Tank. Specifications: Max. Pressure: 80 bar. Operating Pressure: 30-55 bar. Flow Rate: 380 L/hr. Max. Water Feed Temperature: 40C. Hose Length: 5m.

GBP 469.99
1