KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Scope Digilink 3 DL3-05-12V 5 Zone 12v Programmable Transmitter

Please note The image is for illustrative purposes only - thistransmitter does not come with an aerial included. Compatible aerials can bepurchased separately please see related products below.Scope Digilink 3 DL3-05-12V 5 Zone 12v Programmable TransmitterScopes latest generation of DigiLink transmitters are fitted with high specification transmitter modules to provide solid reliable signalling to RX10 or other suitable receivers. DigiLink 3 has either five or ten inputs which can be activated by voltfree or voltage triggers or a mixture of both dependant on the configuration. Regular In Service calls can be automatically transmitted which can trigger a fault zone on the receiver if the calls are not received. This gives the end-user confidence that the system is operating properly.The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone. For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Please note Aerial not included

GBP 320.11

1

Scope Digilink 3 DL3-10-12V 10 Zone 12v Programmable Transmitter

Please note The image is for illustrative purposes only - thistransmitter does not come with an aerial included. Compatible aerials can bepurchased separately please see related products below.Scope Digilink 3 DL3-10-12V 10 Zone 12v Programmable TransmitterScopes latest generation of DigiLink transmitters are fitted with high specification transmitter modules to provide solid reliable signalling to RX10 or other suitable receivers. DigiLink 3 has either five or ten inputs which can be activated by voltfree or voltage triggers or a mixture of both dependant on the configuration. Regular In Service calls can be automatically transmitted which can trigger a fault zone on the receiver if the calls are not received. This gives the end-user confidence that the system is operating properly.The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone. For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Please Note aerials not included.

GBP 376.27

1

Scope RX10LT 10 Zone 12v Class 2 Receiver

Scope RX10LT 10 Zone 12v Class 2 ReceiverThe RX10LT provides a high performance low cost solution for many applications. It can be used with all Scope POCSAG transmitters it has 10 individual relay outputs a common relay output and RS232 serial data output.Key FeaturesCompatibility Can be used with all Scope POCSAG transmitters10 Zones10 individual zone relays common activity relay and sounderVersatile Zone Configuration Each zone individually switchable. All relays can be programmed for latching or momentary operationSerial Port RS232 serial port for data logging or repeater functionsFully Programmable All functions are programmable with PC based configuration softwareReceiver Identity Codes Responds to transmitted RICs receiver identity codes or ranges of RICsGlobal Reset By key-switch or transmitted RICSupervised transmitter in service facilityComes with 14SMA quarter wave aerial - alternative aerials can be bought separately

GBP 454.90

1

Scope PageTek 4 12v 5 Zone Paging Transmitter with Aerial

Scope PageTek 4 12v 5 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 input version has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performance.UHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial - alternative aerials can be bought separately

GBP 351.00

1

Scope PageTek 4 12v 10 Zone Paging Transmitter with Aerial

Scope PageTek 4 12v 10 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 inputversion has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performance.UHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 394.52

1

Scope Connexions CX6DC 12v Transmitter

Scope Connexions CX6DC 12v TransmitterThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHzComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 751.61

1

Scope Connexions CX6MDC 12v Transmitter with Protocol Module

Scope Connexions CX6MDC 12v Transmitter with Protocol ModuleThe Connexions System has always provided the latest in on-site paging technology at a realistic price its modular design concept allows you to buy the basic unit and to add to it as your companys needs change so the initial outlay is kept to a minimum.Flexibility has always been the key word with the Scope Connexions Systems with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone PC network RS232 RS485 USB dry-contacts and voltage triggers. There is also an internal protocol conversion option which enables the translation of incoming RS232 data from host hardware into paging data providing paging from various fire intruder nurse call building management systems etc.The basic unit has two RS232 ports and eight dry contact inputs which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard 9999 so expansion is already built in.The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system POCSAG deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.Key FeaturesBenchmark UHF radio paging systemAvailable with two or three serial portsEight on-board volt free trigger contactsOptional telephone interfaceOptional Ethernet cardCan be driven by a PC either standalone or via a networkOptional protocol conversion software allows connection to almost any fire security or nursecall panelMains powered and DC models are availableModels with 1 watt or 5 watt RF outputRanges of up to 2 kilometres from 1 watt transmitter with wave aerialUnits with internal PSU CX6 90-240V AC 0.5A 5060Hz Mains CX5 90-240V AC 0.8A 5060Hz MainsUnits without PSU CX6DC 12-14V DC 1.5A minimum CX5DC 12-14V DC 3.0A minimumRF Output Power CX6 Up to 1 watt max CX5 Up to 5 watts max 2W max ERP using 459MHz paging band in the UKFrequency Range CX6 446.000MHz - 469.700MHz CX5 446.000MHz - 464.000MHzComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 1214.93

1

Scope PZ10 10 Zone Expansion Unit for RX10 Receiver

Scope PZ10 10 Zone Expansion Unit for RX10 ReceiverA 10 Zone Expansion Unit for the RX10 Receiver.Requires an external 12v DC amp PSU.

GBP 331.34

1

Scope TLINK12V Telemetry System for One-way Link DL3-05-12V amp RX10SDC

Scope TLINK12V Telemetry System for One-way Link DL3-05-12V RX10SDCT-Link takes a 5-zone DigiLink transmitter and combines it with a RX10 receiver and two aerials to produce an off the shelf one-way radio link between fire or intruder panels. The transmitter has five input zones which can be triggered by volts-free opening or closing contacts or can be configured to accept voltage applied or voltage removed.The system is supplied pre-configured to operate change-of-state so a closing contact at the transmitter sends a signal to the receiver to activate the corresponding zone output relay. When the transmitter input is de-activated the relay is deactivated so the output actually follows the input. A programming kit is available if you need to reconfigure the system. Additional transmitters and receivers can be added when needed.This can simply be achieved by installing Digilink transmitters and receivers adjacent to the fire or security panels where their relay contacts can be hard wired into the output inputs of the panel in order to provide wireless alarm signals between buildings. For roaming fire marshals and security personnel the serial output of the receiver can be connected to the Scope Connexions Range of paging transmitters in order to send pre-programmed text messages to pocket worn pagers.It is also possible to connect the printer output of analogue addressable panel to a serial port of the Connexions transmitter in order to transmit real time panel messages to the pagers thus saving valuable time by not having to view the message at the panel. The same format could also be deployed for access control plant monitoring lone worker and care home applications where staff has to be made aware of situations arising from automated or manual inputs.

GBP 917.75

1

Scope TLINKLT Telemetry System for One-way Link DL3-05-12V amp RX10LT

Scope TLINKLT Telemetry System for One-way Link DL3-05-12V RX10LTT-Link takes a 5-zone DigiLink transmitter and combines it with a RX10 receiver and two aerials to produce an off the shelf one-way radio link between fire or intruder panels. The transmitter has five input zones which can be triggered by volts-free opening or closing contacts or can be configured to accept voltage applied or voltage removed.The system is supplied pre-configured to operate change-of-state so a closing contact at the transmitter sends a signal to the receiver to activate the corresponding zone output relay. When the transmitter input is de-activated the relay is deactivated so the output actually follows the input. A programming kit is available if you need to reconfigure the system. Additional transmitters and receivers can be added when needed.This can simply be achieved by installing Digilink transmitters and receivers adjacent to the fire or security panels where their relay contacts can be hard wired into the output inputs of the panel in order to provide wireless alarm signals between buildings. For roaming fire marshals and security personnel the serial output of the receiver can be connected to the Scope Connexions Range of paging transmitters in order to send pre-programmed text messages to pocket worn pagers.It is also possible to connect the printer output of analogue addressable panel to a serial port of the Connexions transmitter in order to transmit real time panel messages to the pagers thus saving valuable time by not having to view the message at the panel. The same format could also be deployed for access control plant monitoring lone worker and care home applications where staff has to be made aware of situations arising from automated or manual inputs.

GBP 793.26

1

Scope PZ10L 10 Zone Expansion Unit for RX10 Receiver

Scope PZ10L 10 Zone Expansion Unit for RX10 ReceiverA 10 Zone Expansion Unit in a large case for the RX10 Receiver.Requires external 12v DC amp PSU.

GBP 449.28

1

Scope RX2 Mk2 Two Channel POCSAG Receiver with Logging Facilities

Scope RX2 Mk2 Two Channel POCSAG Receiver with Logging FacilitiesThe new RX2 Mk2 is a complete re-design of the original RX2OEM. It is now supplied cased and programmed ready to go though there is still an OEM uncased version available. It has two zones with relay outputs a RS232 output and a USB port for programming. There is also a microSD slot with 8Gb card for recording event log data.The card also contains the programming software enabling complete control of the configuration of the unit from a PC and for downloading and analysing the data contained in the log. It is also possible to monitor live incoming data in text and graphical format.Key FeaturesReceives monitors and logs POCSAG dataTwo zone relay outputs RS232 output USB programming portMicroSD slot for event loggingPC software suppliedHigh quality category 1.5 receiver module EN 300 220-1 v3.1Frequency range of 430MHz to 470 MHzPower requirement is 12v - 13.8v DC maximum current draw is 126mA

GBP 454.90

1

Scope PageTek 4 Mains Powered 10 Zone Paging Transmitter with Aerial

Scope PageTek 4 Mains Powered 10 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 input version has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performance.UHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 495.61

1

Scope PageTek 4 Mains Powered 5 Zone Paging Transmitter with Aerial

Scope PageTek 4 Mains Powered 5 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 inputversion has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performance.UHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 416.99

1

Scope PageTek 4 24v 5 Zone Paging Transmitter with Aerial

Scope PageTek 4 24v 5 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 inputversion has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performance.UHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 379.08

1

Scope PageTek 4 24v 10 Zone Paging Transmitter with Aerial

Scope PageTek 4 24v 10 Zone Paging Transmitter with AerialScope PageTek 4 paging transmitters are available with either 5 or 10 programmable zone inputs which when triggered will automatically send the active zone message to portable or fixed pagers. This message can be repeated at predetermined intervals and a secondary message can be sent when the zone returns to its inactive state if required.Multiple transmitters can be deployed at various locations all signalling to the same pagerpager groups. Regular In Service calls can be automatically sent to the receiving devices which can indicate No Service on the pagers or trigger a fault zone on fixed receivers if the calls are not received. This gives the end-user confidence that the system is operating properly. The 10 zone version also has a special Burglar Alarm mode with configurable entryexit delay transit zones and entry zone.For advanced users who wish to program the unit themselves a Programming Kit can be purchased. This consists of Windows based application software and a USB cable for PC. This allows all functions to be programmed and stored in the system n secure non-volatile memory. 12VDC 24VDC and mains powered versions are available with an optional battery back-up facility for the mains version.Key Features5 and 10 zone input versionsMains powered 24V and 12V DC modelsAutomated In Service calls can be configured to alert pagers to the loss of radio signalFully programmable via USB with optional PC softwareProgrammable individual pager text messages for each zone and each zone stateAdjustable trigger times delays alarm repeats are all programmable options. In addition the 10 input version has a dedicated burglar alarm modeHigh quality high power 1w erp transmitter modules provide rock-solid RF performanceUHF POCSAG signalling format ensures excellent propagation even in difficult environmentsComes with14BNC quarter wave aerial -alternative aerials can be bought separately

GBP 429.16

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)