KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Ziton ACA-CP-100 quotPquot Clip cw Silicon Sleeve - Pack of 100

Ziton ACA-CP-100 P Clip cw Silicon Sleeve - Pack of 100The ACA-CP series P clip is designed to secure LHD linear heat detection sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.InstallationRecommended spacing 1mKey FeaturesEasy installation of linear heat cableAvailable in aluminiumPack of 100

GBP 98.06

1

Ziton ACA-RS-100 Alarmline Silicon Sleeve - Pack of 100

Ziton ACA-RS-100 Alarmline Silicon Sleeve - Pack of 100The ACA-RS series silicone sleeves are designed to protect linear heat sensor cable against mechanical damage from the tie wrap used when the cable is secured. The ACA-RS is a split sleeve used to protect the sensor cable from being crushed or damaged when attached to fixing clips or brackets. It acts as an insulator to prevent the transfer of heat through these metal clips or brackets to the LHD cable and is fire resistant.Key FeaturesProtection of linear heat cable against mechanical damageFor use with any LHD fastening brackets or clipsFire resistantPack of 100

GBP 61.79

1

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100

Ziton ACA-TWSS-100 Tie Wrap Stainless Steel - Pack of 100The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in stainless steelPack of 100

GBP 156.90

1

Ziton ACA-TW11W-100 Tie Wrap PA66 110C 230F - Pack of 100

Ziton ACA-TW11W-100 Tie Wrap PA66 110C 230F - Pack of 100The ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in PA66Pack of 100

GBP 14.52

1

Ziton ACA-TW17-100 Tie Wrap PA66 170C 338F - Pack of 100

Ziton ACA-TW17-100 Tie Wrap PA66 170C 338FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor applicationsAvailable in ETFE Ethylene tetrafluoroethylenePack of 100

GBP 303.17

1

Ziton ACA-B706SS-100 Alarmline 7 Bracket Stainless Steel - Pack of 100

Ziton ACA-B706SS-100 Alarmline 7 Bracket Stainless Steel - Pack of 100The ACA-B706 series 7-bracket pipe clip is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.InstallationThe ACA-B706 should be fitted to the underside of the pipe and secured in place using suitable cable ties or strapping. The hole in the end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. Alternatively an I-bracket distance piece may be connected to the 7-bracket to extend the position of the sensor cable. Without an extension the 7-bracket pipe clip supports the sensor cable approx. 60mm below the pipe.Key FeaturesEasy installation of linear heat cableFor use on existing pipes in the areaAvailable in zintecPack of 100

GBP 514.91

1

Ziton ACA-CT-100 Alarmline T Clip - Pack of 100

Ziton ACA-CT-100 Alarmline T Clip - Pack of 100The ACA-CT T clip is designed to secure LHD linear heat detection sensor cable. It may be used as a ceiling or wall mount clip.The clip consists of a low-density polyethylene resin moulding with a slot into which the heat sensing cable is located combined with a 25 mm standoff. In ceiling applications the 25 mm standoff exposes the cable faster to any rise in temperature as it lifts the cable out of the layer of colder air that is often trapped against the ceiling.InstallationThe clip is secured with a screw and wall plug using an M8 pan head screw self-tapping screw. For extra security a tie wrap may be used to prevent the cable from being pulled from the clip. A figure-8 configuration on the tie wrap is ideal for this.Spacing for clips is recommended every meter along the length of the cable. Two clips in close proximity are used at 90 degrees bends or where the cable route changes direction.For space protection applications the ideal location for the heat sensing cable is on the ceiling or the top of the sidewall. This ensures that the cable is rapidly exposed to the plume of hot gases from any event that may arise and spread across the ceiling.Key FeaturesEasy installation of linear heat cableFor ceiling or wall mount applicationsProvides insulation and spacing from walls and ceilingsStandard M4 fixing holePack of 100

GBP 77.60

1

Ziton ACA-BL05-100 quotLquot Bracket 50mm 2quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL05-100 L Bracket 50mm 2 Zintec cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 167.51

1

Ziton ACA-BL10-100 quotLquot Bracket 100mm 3.9quot Zintec cw Silicon Sleeve - Pack of 100

Ziton ACA-BL10-100 L Bracket 100mm 3.9 Zintec cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 220.81

1

Ziton ACA-CE14-100 quotEdgequot Clip Spring Steel 14-20mm 916quot - Pack of 100

Ziton ACA-CE14-100 Edge Clip Spring Steel 14-20mm 916The ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on metal structures like girders steel sections angle bars floating roof storage tank rim seals foam dams etc.Excellent resistance to corrosion and heatAvailable in spring steelPack of 100

GBP 185.33

1

Ziton ACA-CE08-100 quotEdgequot Clip Spring Steel 8-14mm 516quot - Pack of 100

Ziton ACA-CE08-100 Edge Clip Spring Steel 8-14mm 516 - Pack of 100The ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on metal structures like girders steel sections angle bars floating roof storage tank rim seals foam dams etc.Excellent resistance to corrosion and heatAvailable in spring steelPack of 100

GBP 230.63

1

Ziton ACA-CE03-100 quotEdgequot Clip Spring Steel 3-8mm 216quot - Pack of 100

Ziton ACA-CE03-100 Edge Clip Spring Steel 3-8mm 216 - Pack of 100The ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on metal structures like girders steel sections angle bars floating roof storage tank rim seals foam dams etc.Excellent resistance to corrosion and heatAvailable in spring steelPack of 100

GBP 253.42

1

Ziton ACA-BL05SS-100 quotLquot Bracket 50mm 2quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL05SS-100 L Bracket 50mm 2 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 240.52

1

Ziton ACA-BL20SS-100 quotLquot Bracket 200mm 7.9quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL20SS-100 L Bracket 200mm 7.9 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in stainless steelPack of 100

GBP 720.67

1

Ziton ACA-BL10SS-100 quotLquot Bracket 100mm 3.9quot Stainless Steel cw Silicon Sleeve - Pack of 100

Ziton ACA-BL10SS-100 L Bracket 100mm 3.9 Stainless Steel cw Silicon Sleeve - Pack of 100The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.InstallationThe ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 310.18

1

Ziton ACA-CPSS-100 quotPquot Clip Stainless Steel cw Silicon Sleeve

Ziton ACA-CPSS-100 P Clip Stainless Steel cw Silicon SleeveThe ACA-CP series P clip is designed to secure LHD linear heat detection sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.Key FeaturesEasy installation of linear heat cableAvailable in stainless steelAvailable in quantities of 100

GBP 211.34

1

Ziton ACA-B706-100 Alarmline 7 Bracket - Pack of 100

Ziton ACA-B706-025 Alarmline 7 Bracket - Pack of 100The ACA-B706 series 7-bracket pipe clip is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.InstallationThe ACA-B706 should be fitted to the underside of the pipe and secured in place using suitable cable ties or strapping. The hole in the end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. Alternatively an I-bracket distance piece may be connected to the 7-bracket to extend the position of the sensor cable. Without an extension the 7-bracket pipe clip supports the sensor cable approx. 60mm below the pipe.Key FeaturesEasy installation of linear heat cableFor use on existing pipes in the areaAvailable in zintecPack of 100

GBP 370.62

1

Ziton ACA-BL20-100 quotLquot Bracket 200mm 7.9quot Zintec cw Silicon Sleeve - Pack of 100

ZitonACA-BL20-100L Bracket 200mm 7.9 Zintec cw Silicon Sleeve - Pack of 25The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BL may be fitted to the cable tray and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The L-bracket allows support for the sensor cable at the selected distance away from the detection area.Key FeaturesEasy installation of linear heat cableFor use on cable traysAvailable in zintecPack of 100

GBP 487.28

1

Ziton ACA-BI20-100 Bracket quotIquot - 200mm 7.9quot Zintec cw Silicon sleeve - Pack of 100

Ziton ACA-BI20-100 Bracket I - 200mm 7.9 Zintec cw Silicon sleeve - Pack of 100The ACA-BI series I-brackets extension pieces is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.The ACA-BI may be fitted to the bracket or clip and secured in place using a suitable bolt and nut at one end. The hole at the other end of the bracket allows for the securing of the sensor cable using a silicone sleeve and cable tie. The extension piece allows support for the sensor cable an additional approx. 200mm away from the end of the bracket or clip.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on existing brackets and clips

GBP 370.62

1

Ziton 2010-2FR-MB ZP2 Repeater Main PCB

Ziton 2010-2FR-MB ZP2 Repeater Main PCBThe2010-2FR-MB is areplacement main board designed for use with ZP2 large and small cabinet repeaters.Key FeaturesEthernet port with TCP IP for remote maintenance and programmingAll Terminals pluggable3 USB ports with memory stick support3 RS232 interfaces24 V DC supply alarm switch with reset functionVdS approval G 210005

GBP 450.97

1

Ziton 2010-2F2-MB ZP2 Main PCB - 2 Loop

Ziton 2010-2F2-MB ZP2 Main PCB - 2 LoopThe 2010-2F2-MB is a replacement main board for all ZP2 2 loop control panels.Key Features2 ring with up to 128 zones and main detector control unitAuto-configuration and regional commissioning modeEthernet port with TCP IP for remote maintenance and programmingAll Terminals pluggable3 USB ports with memory stick support3 RS232 interfaces24 V DC supply alarm switch with reset functionVdS approval G 210005Technical SpecificationsPower supply Operating voltage 230110 V AC 10 -15Operating Current Nom. 0.6 1.3 A Max. 1.5 3.15 AFrequency 5060 Hz 5Backup 24 ACable Type 3 x 1.5 mm line neutral earthOutputs Fire Alarm fault monitors 2350 mA 19.5 to 28 V DCProgrammable monitored 2750 mA 19.5 to 28 V DCAUX 1 switched 500 mA 19.5 to 28 V DCFire Alarm fault relay 2Terminator AG 15 kOhmInputs Programmable 2Maximum load 150mATerminator EC 15 kOhmCable Characteristics Outputs 1250 mA 29 V DC to 36 V DCCable length 56ohm 1uF max. 4 kmEnvironmental conditions Storage temperature -20 C to 50 COperating temperature -5 C to 40 CDimensions Overall dimensions W x H 320 x 110 mmAdmission VdS Approved G 211005

GBP 514.81

1

Ziton 2010-2F1-MB ZP2 Main PCB - 1 Loop

Ziton 2010-2F1-MB ZP2 Main PCB - 1 LoopThe 2010-2F1-MB is a replacement main board for all ZP2 1 loop control panels.Key Features1 Ring with up to 64 zones and the main detector control unitAuto - configuration and regional commissioning modeEthernet port with TCP IP for remote maintenance and programmingAll Terminals pluggable3 USB ports with memory stick support3 RS232 interfaces24 V DC supply alarm switch with reset functionVdS approval G 210005Technical SpecificationsPower supply Operating voltage 230110 V AC 10 -15Operating Current Nom. 0.6 1.3 A Max. 1.5 3.15 AFrequency 5060 Hz 5Backup 24 ACable Type 3 x 1.5 mm line neutral earthOutputs Fire Alarm fault monitors 2350 mA 19.5 to 28 V DCProgrammable monitored 2750 mA 19.5 to 28 V DCAUX 1 switched 500 mA 19.5 to 28 V DCFire Alarm fault relay 2Terminator AG 15 kOhmInputs Programmable 2Maximum load 150mATerminator EC 15 kOhmCable Characteristics Outputs 1250 mA 29 V DC to 36 V DCCable length 56ohm 1uF max. 4 kmEnvironmental conditions Storage temperature -20 C to 50 COperating temperature -5 C to 40 CDimensions Overall dimensions W x H 320 x 110 mmAdmission VdS Approved G 211005

GBP 349.94

1

Ziton Tie Wrap PA66 110C 230F

Ziton Tie Wrap PA66 110C 230FThe ACA-TW series tie wraps cable ties is designed to secure linear heat sensor cable to the LHD brackets and clips. The tie wraps are available in various temperature ratings for matching or surpassing the temperature specifications of the selected LHD sensor cable.UV stabilised and stainless steel variants are suitable for outdoor applications whilst stainless steel variants additionally allow for the installation of very high temperature digital cable.A tool ACA-TWT is available for the stainless steel tie wrap installation.Key FeaturesEasy installation of linear heat cableFor use with LHD brackets and clipsIndoor and outdoor applicationsAvailable in PA66Available in quantities of 25 or 100

GBP 4.45

1

Ziton ZP1-F2-MB ZP1 Main Board - 2 Zone Replacement Main PCB for the ZP1-F2-xx

Ziton ZP1-F2-MB ZP1 Main Board - 2 Zone Replacement Main PCB for the ZP1-F2-xxThe ZP1-F2-MB is a ZP1 Main Board - 2 Zone Replcement Main PCB designed for theZP1-F2 range.ZP1 fire control panels offer state of the art architecture in configurations that deliver an uncomplicated solution for small to mid-sized conventional applications. They feature an attractive contemporary design that fits with any decor. The gently curved door front offers a distinctive flair. Operator controls are inset in a striking blue lexan.With support for multiple lines of conventional detectors and accessories these quick-to-configure systems offer versatility that benefits building owners and installationmaintenance companies alike.The PanelThe ZP1-F2 is a conventional fire alarm control panel. It is supplied in local language with 2 zones that support up to 32 devices per zone as well as up to 2 supervised relay outputs dedicated to sounder control. In addition 2 conventional relay outputs dedicated to common fire and fault conditions as well as two user configurable inputs for monitoring and control are available.OptionsThe panels support 2 types of auxiliary relay boards one with 4 standard relays and one with 4 supervised relays. With these boards the panel outputs may be expanded with up to 8 additional outputs.Approvals ComplianceThe product line carries the following accreditationsRoHS compliantWEEE compliantNEN2535 NBNS21-100 and BS5839-1 compliantCPD certifiedEN542 EN544 and CE approvedType class conditions 3K5 of IEC 60721-3-3Key FeaturesModern elegant designEasy removable parts for quick and clean installationDefault regional setup modesNormal head-out intrinsically safe zone supportSupervised alarm notification outputsEN54 compliant potential free fire fault relaysClass change daynight remote reset facilitiesAuxiliary 24VDC supply output with reset supportDefault support for special functions such as - EN54 compliant user access levels - mixed zones - full front panel diagnostics - one-man walk testAuxiliary standard supervised relay output boardsNetworkable up to 64 zones

GBP 180.13

1

Ziton FDR100-EZ Addressable Loop Powered Reflective Beam Detector 100m

Ziton FDR100-EZ Addressable Loop Powered Reflective Beam Detector 100mThe FDR100-EZ linear beam smoke detector is developed for use in areas where point type detectors would be difficult to install and maintain. The FDR100-EZ has a detection ranges of up to 100 metres. A transmitter and receiver are contained in one enclosure. The transmitter emits an invisible infrared beam which is reflected back to the receiver by a prism mounted directly opposite and in clear line of sight. The presence of smoke obscures the beam and reduces the signal strength detected at the receiver.The FDR100-EZ incorporates continuous monitoring of both electrical and optical faults. If the infrared beam is obscured rapidly to a level above 90 for approximately 10 seconds the condition is seen as a fault. Long-term degradation of signal strength is monitored and adjusted automatically. Installed under flat horizontal ceilings a single unit provides satisfactory smoke detection up to 7.5 metres on either side of the beam axis. For larger areas multi detector systems can be installed. The FDR100-EZ addressable detector is connected directly to the ZP3 loop wiring and is configured with its own address which the control panel poles every two seconds.Alarm thresholds of 25 35 and 50 obscuration are selectable making the detector suitable for a wide range of building environments. The fire output can be set to latch only cancelled by resetting the device or auto reset where the detector is reset automatically 5 seconds after the received infrared signal has recovered to a level above the alarm threshold. The detector and the reflecting prism are installed on opposite walls of the protected area usually between 0.3 and 0.6 metres below ceiling height. With unique alignment features the equipment is easy to install provides high stability and freedom from false alarms.Key FeaturesSingle installation and maintenance pointFully addressable100 metre detection rangeUnique simple alignmentSelectable alarm thresholdsLatching or auto reset fire outputAutomatic contamination compensation

GBP 762.84

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)