KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Talentum Dual IR Flame Detector 16581

Talentum Dual IR Flame Detector 16581These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002Applications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 1818.30

1

Talentum Dual IR Hazardous Area Flameproof Detector 16511

Talentum Dual IR Hazardous Area Flameproof Detector 16511These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002 IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste Handling

GBP 2731.80

1

Talentum 16571-00 Dual IR Intrinsically Safe Detector

Talentum 16571-00 Dual IR Intrinsically Safe DetectorThese flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed.They can operate on a conventional 2-wire 14-28 Vdc fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors operating modes can be user selected giving a choice of alarm currents response times latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55C.Key Features High immunity to false sources For applications with visible light present Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-102002IR2 Flame Detector RangeApplications Used On Churches Coal Handling Fume Cupboards Printing Spray Booths Textiles Waste HandlingThese sensors have been approved by Baseefa notified body no 1180 to EN60079-0 EN60079-11 and EN60079-26.The requirements of Directive 949EC the ATmosphere EXplosives ATEX Directive have also been met.Apparatus Certificate Number BAS02ATEX1001System Certificate Number Baseefa08Y0078Certified toATEX II 1 GCENELECIEC Ga Ex ia IIC T4 Zones 0 1 2

GBP 2288.10

1

Howler SHG05 SafetyHub Mobile Sanitiser Station with Cabinet

Please note Additional shipping charges apply to this product.Howler SHG05 SafetyHub Mobile Sanitiser Station with Cabinet Complete with an automatic sanitiser dispenser the mobile hand sanitising station is highly mobile and is perfect for tackling cleanliness on any side wherever you need it. The large signage makes it easily identifiable and has a robust construction to withstand the tough demands. Consider locating this near communal and eating areas as well as entrances and exits to keep your site clean and safe.Ideal for storing marks gloves barrier tape and other essential equipment the cabinet is lockable to secure the contents and protect it from the elements. Highly portable and configurable the mobile hand sanitising station is lightweight easy to assemble and will condense down to a compact wheeled unit for ease of storage and transportation. With a 5-year warranty the SafetyHub is dent rust and corrosion-resistant to make it vertically indestructible thanks to the rotationally moulded plastic design. After a long and useful life it is then 100 recyclable.Manufactured by Howler the SafetyHub is 100 recyclable and measures 625 x 430 x 1560mm. The mobile first aid point is incredibly versatile for use in any environment indoors or outdoors. That makes it ideal for use on construction sites in factories workshops filling stations on civil engineering projects at events and in pretty much any other kind of busy environment you can think ofPlease note Sold without SanitiserKey FeaturesSecure lockable equipment cabinet for wipes spray masks gloves barrier tape etcComes with pre-printed signage.Weatherproof non-corrosive designSanitiser dispenser pre-fitted to backboardInternal storage shelfW 625mm D 430mm H 1560mm

GBP 998.29

1

Gent S4-34760 Duct Housing

Gent S4-34760 Duct HousingIncluding S-Quad Base and 0.6M TubeAn optical smoke sensor specifically designed for use in ventilation ducting. A venturi probe samples the air in the duct for smoke. Detector housing is mounted externally to the duct. This device can trigger the shut-down of an air-conditioning or ventilation plant to prevent the spread of smoke.Unfortunately air ducts do not just guarantee fresh air but in the event of a fi re they can also deliver toxic smoke from the fire source to distant area via the exhaust air system. Therefore air ducts must be monitored.The Gent duct sensor housing offers effective protection which is easy to install and maintain. The Gent duct sensor housing is supplied complete with an S Quad Sensor base and is thus compatible with the full range of S-Quad detectors S4-911 in high sensitivity state is recommended. The housing is mounted on the outside of the air duct. A Venturi pipe 0.6m 1.5m or 2.8m is inserted into the duct and delivers air from the duct through detection chamber and back to the duct. An air fl ow indicator shows whether there is an airflow through the housing.A maintenance hole in the transparent cover allows test spray to be applied without opening the cover. Using the Venturi effect means that a single sampling tube can be used and air velocities of as little as 1 Metre a second can be sensed. A mounting bracket is also available to mount the detector on circular and insulated ducts.The housing can be mounted in any orientation. The arrow shape design can be mounted in any orientation. The arrow shape design of the tough grey abs housing shows the direction of flow thus making installation quick and simple.Key FeaturesDirection of flow indicated by housingSingle sampling tubeCompatible with S-Quad SensorsSampling tubes available in three lengthsMounting bracket availableRemote LED can be installed via S-Quad monitor outputAir Duct uses Venturi processFully integrated into Vigilon loop

GBP 738.02

1

Hawco 318-100 60C 140F Industrial Detect-a-Fire Heat Detector Pack of 6

Pleasenote This product incurs additional shipping charges.Hawco 318-100 60C 140F Industrial Detect-a-Fire Heat DetectorPack of 6DETECT-A-FIRE D-A-F detectors are the heartof many fire protection systems. The highly reliable D-A-F has been thestandard for over 75 years. The D-A-F is used for signaling overheat or fireconditions. In most applications the D-A-F provides the initial heat sensingthat is used to activate suppression systems using clean agent CO2 inertgases wet or dry chemicals or water.D-A-F detectors are widely accepted because they aredesigned with rate compensation. This provides a unique advantage over bothfixed temperature and rate-of-rise types of detectors because the D-A-Fdetector accurately senses the surrounding air temperature regardless of thefire growth rate. At the pre-determined set point the system is activated.Fixed temperature detectors must be completely heated to alarm temperature andtherefore a lag in response time may occur with a fast rate fire. Rate-of-risedevices on the other hand are triggered by the rate of increase in ambienttemperature and are subject to false alarms caused by harmless transientthermal gradients such as the rush of warm air from process ovens. The key to the detectors sensitivity is in the design. Theouter shell is made of a rapidly expanding alloy which closely follows changesin surrounding air temperature. The inner struts are made of a slower expandingalloy. Designed to resist thermal energy absorption and sealed inside theshell the struts follow temperature changes more slowly. A slow rate fire willheat the shell and struts together. At the set point the detectorwill trigger actuating the alarm or releasing the extinguishant.A transient rush of warm air up to 40Fmin. may expand theshell while not triggering the detector. By ignoring transient warm airexcursions the D-A-F detector virtually eliminates false alarms prevalent withrate-of-rise devices. If a fast rate fire starts the shell will expandrapidly. The struts will close actuating the alarm andor releasing the agent.The faster the fire rate of growth the sooner the D-A-F detector will react.Key FeaturesRepeatable - self-restoring nothing to replace testableVersatile - various temperature settings availableDurable - long-lasting stainless-steel shellEconomical - wide spacings reduce installation costsInternal contact area hermetically sealed in stainless steelshellROHS CompliantProtection of schools factories offices libraries orother non-residential buildingsPower generationGas station islandsPaint spray boothsRange hoodsEngine compartments

GBP 1534.82

1

Hawco 318-102 88C 190F Industrial Detect-a-Fire Heat Detector Pack of 6

Please note This product incurs additional shipping charges.Hawco 318-102 88C 190F Industrial Detect-a-Fire HeatDetector Pack of 6DETECT-A-FIRE D-A-F detectors are the heartof many fire protection systems. The highly reliable D-A-F has been thestandard for over 75 years. The D-A-F is used for signaling overheat or fireconditions. In most applications the D-A-F provides the initial heat sensingthat is used to activate suppression systems using clean agent CO2 inertgases wet or dry chemicals or water.D-A-F detectors are widely accepted because they aredesigned with rate compensation. This provides a unique advantage over bothfixed temperature and rate-of-rise types of detectors because the D-A-Fdetector accurately senses the surrounding air temperature regardless of thefire growth rate. At the pre-determined set point the system is activated.Fixed temperature detectors must be completely heated to alarm temperature andtherefore a lag in response time may occur with a fast rate fire. Rate-of-risedevices on the other hand are triggered by the rate of increase in ambienttemperature and are subject to false alarms caused by harmless transientthermal gradients such as the rush of warm air from process ovens. The key to the detectors sensitivity is in the design. Theouter shell is made of a rapidly expanding alloy which closely follows changesin surrounding air temperature. The inner struts are made of a slower expandingalloy. Designed to resist thermal energy absorption and sealed inside theshell the struts follow temperature changes more slowly. A slow rate fire willheat the shell and struts together. At the set point the detectorwill trigger actuating the alarm or releasing the extinguishant.A transient rush of warm air up to 40Fmin. may expand theshell while not triggering the detector. By ignoring transient warm airexcursions the D-A-F detector virtually eliminates false alarms prevalent withrate-of-rise devices. If a fast rate fire starts the shell will expandrapidly. The struts will close actuating the alarm andor releasing the agent.The faster the fire rate of growth the sooner the D-A-F detector will react.Key FeaturesRepeatable - self-restoring nothing to replace testableVersatile - various temperature settings availableDurable - long-lasting stainless-steel shellEconomical - wide spacings reduce installation costsInternal contact area hermetically sealed in stainless steelshellROHS CompliantProtection of schools factories offices libraries orother non-residential buildingsPower generationGas station islandsPaint spray boothsRange hoodsEngine compartments

GBP 1534.82

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant