84 results (0,14550 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Cranford Controls VTB-12V-SB-WBAL Spatial Sounder Beacon 12v 32 Tone White Body Amber Lens Shallow Base

Cranford Controls VTB-12V-SB-WBAL Spatial Sounder Beacon 12v 32 Tone White Body Amber Lens Shallow Base

Cranford Controls VTB-12V-SB-WBAL Spatial Sounder Beacon 12v 32 Tone White Body Amber Lens Shallow BaseThe VTB 12Vdc sounder beacon is part of the VTG family of products and is primarily designed for use with security systems but equally for other general 12Vdc applications.The sounder function like all VTG products comes as standard with 32 tones. The beacon function has been designed for maximum all-round visibility coupled with low power consumption utilising an array of energy-efficient LEDs. The sounder function features a two-stage alarm override which is activated by a third negative wire.Both the sounder and beacon functions are fully synchronised. The product can also be used as a beacon only which is easily selected by a DIL switch at the time of installation.Key Features32 tones plus a selectable override toneShallow base IP43 and deep base IP65 versions availableTwo volume settings are available via the DIL switchSwitch selectable beacon-only featureUnique twist and lock bayonet mounting systemRemovable cover on deep base for surface wiringFeatures base locking system as standard

GBP 54.11
1

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU Unboxed

Elmdene G1224-42NU 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU UnboxedThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.67
1

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery ChargingThe ACCESS-PSU-N is part of a range of power supplies which have been specifically designed to house common access control door controllers. With different power options and enclosure sizes this range offers the installer a PSU for a variety of applications.This range offers fault signalling and can charge a 12V standby battery to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.Key Features13.8V dc outputCompact single and multi-controller enclosuresPCB mounts supplied for common controllersMains fail fault output excluding ACCESS-PSU-NTamper protectionSwitchable 12V 24V dc versions availableUniversal 90 to 264V ac mains input rangeBespoke models and branding available3 year warrantyPlease note The image is for illustrative purposes only. Please contact us for further details.

GBP 63.04
1

Elmdene G13802N-B 12V Switch Mode Power Supply Unit 2A

Elmdene G13802N-B 12V Switch Mode Power Supply Unit 2A

Elmdene G13802N-B 12V Switch Mode Power Supply Unit 2A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 62.08
1

Elmdene G13802N-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802N-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802N-A 12V Switch Mode Power Supply Unit 2AThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features 13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 49.03
1

Cooper Fulleon 12v Flashni Sounder Beacon Blue Lens Red Body Shallow Base Tone 5

Cooper Fulleon 12v Flashni Sounder Beacon Blue Lens Red Body Shallow Base Tone 5

Cooper Fulleon 12v Flashni Sounder Beacon Blue Lens Red Body Shallow Base Tone 5The Flashni is an audible and visual device which requires one single installation point. This greatly reduces installation and costs and is much less obtrusive than two separate devices. Versions are available with the sounder and beacon linked or with separate terminals for independent operation.Key FeaturesHigh output sounder beaconAutomatic sounder synchronisationVolume controlChoice of lens sounder colour combinationsBase compatible with the Roshni and Solex beaconsLockable baseMED certification

GBP 44.30
1

Cooper Fulleon 1423-BZ-12 2-LED OpticalAcoustic Indicator 12v RedGreen

Cooper Fulleon 1423-BZ-12 2-LED OpticalAcoustic Indicator 12v RedGreen

Cooper Fulleon 1423-BZ-12 2-LED OpticalAcoustic Indicator 12v RedGreenOptical and optical-acoustic repeater with low current draw LED suited to a wide range of applications in signalling alarms anomalies on-off traffic lights etc.The light of the LEDs having a wide visibility angle can be steady or blinking to be selected by an internal jumper while the buzzer provides a continuous sound of suitable power.They are aesthetically well integrated with the most used switch frames and available in both the wall mounting and recessed versions with a box of Bticino 503 type version I.Key FeaturesWall or recessed mountingRedGreen LEDsPower supply at 12vVery low current drawOptical-acoustic versions with Buzzer

GBP 56.87
1

Elmdene VRS128000-8-T 12V d.c. Switch Mode PSU 8Amp - 8 x Fused Outputs

Elmdene VRS128000-8-T 12V d.c. Switch Mode PSU 8Amp - 8 x Fused Outputs

Elmdene VRS128000-8-T 12V d.c. Switch Mode PSU 8Amp - 8 x Fused OutputsElmdenes popular 12V dc CCTV range of power supplies consists of both low-profile and IP68 variants. The units are available in either 4A or 8A power ratings with options of up to 16 individually fused output circuits.Individual fused outputs can provide isolation of selected circuits when servicing or in the event one circuit fails allowing the rest of the system to operate normally maintaining system integrity.All units feature fuse health LEDs which are illuminated to show that each powered circuit is functioning correctly.Each fused output circuit may have different value fuses to suit the individual loads eg cameras lighting etc.The 8A versions are offered in a lockable enclosure keyed alike while the 4A versions possess a hinged screw lid.Cable entry is achieved by utilising either cable gland knockouts or via the allocated rear cable entry points of the enclosures.For external use the IP68 models 4A are provided without cable entry points allowing the installer to choose the primary locations to suit the installation.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their power bills and carbon footprint.Key FeaturesIdeal for CCTVT Box 300h x 240w x 50dHinge LidIndividual fuse health LED indicationWhite powder coated 1.2mm steel enclosureLockable lid 8A variantsLow profile design 50mmHigh efficiency and cost effective switch mode technologyFully regulated 12V dc outputFull rated current to loadElectronic short-circuit protectionInstaller safe shrouded high voltage electronicsReplaceable 20mm mains and output fusesUniversal 90 264V ac mains supplyMultiple cable entryexit optionsModular construction for easy servicing3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 71.90
1

Yuasa 12V 17AH Battery Inverted Terminals NP17-12

Yuasa 12V 17AH Battery Inverted Terminals NP17-12

Yuasa 12V 17AH Battery Inverted Terminals NP17-12The Yuasa NP Series batteries set the standard for quality and excellence in the field of rechargeable batteries. These high-quality batteries ensure that no electrolyte leakages occur from the case or terminals. The NP series range is almost maintenance-free with the perfectly sealed construction and the recombination of gases within the cell.The NP series offers a unique electrolyte suspension system incorporating a microfine glass mat AGM to retain the maximum amount of electrolyte in the cells. The valve regulated design of this battery is equipped with a safe low-pressure venting system which releases excess gases and automatically reseals should there be a build-up of gas within the battery due to overcharging.Key FeaturesEUROBAT Classification 3 to 5 years Standard CommercialGeneral purpose VRLA batteryLead Calcium Grids for superior lifeAbsorbed Glass Mat construction with no free acidGas recombinationManufactured world wideGood recovery from deep dischargeOperation in any orientation excluding continuous inverted use

GBP 55.90
1

Elmdene G13803N-B 12V Switch Mode Power Supply Unit 3A B-Box

Elmdene G13803N-B 12V Switch Mode Power Supply Unit 3A B-Box

Elmdene G13803N-B 12V Switch Mode Power Supply Unit 3A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 64.43
1

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-Box

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-Box

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 60.37
1

Elmdene G13804N-C 12V Switch Mode Power Supply Unit 4A C-Box

Elmdene G13804N-C 12V Switch Mode Power Supply Unit 4A C-Box

Elmdene G13804N-C 12V Switch Mode Power Supply Unit 4A C-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 4Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 75.58
1

Elmdene G13803N-C 12V Switch Mode Power Supply Unit 3A C-Box

Elmdene G13803N-C 12V Switch Mode Power Supply Unit 3A C-Box

Elmdene G13803N-C 12V Switch Mode Power Supply Unit 3A C-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 17Ah battery.C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 64.43
1

Cooper Fulleon 640206FULL-0089 12V DC Clear lens Shallow white FW base Set to Tone 5

Cooper Fulleon 640206FULL-0089 12V DC Clear lens Shallow white FW base Set to Tone 5

Cooper Fulleon 640206FULL-0089 12v Flashni Sounder Beacon Clear Lens - White Body - Deep Base Tone 5The Flashni is an audible and visual device which requires one single installation point. This greatly reduces installation and costs and is much less obtrusive than two separate devices. Versions are available with the sounder and beacon linked or with separate terminals for independent operation.Key FeaturesHigh output sounder beaconAutomatic sounder synchronisationVolume controlChoice of lens sounder colour combinationsBase compatible with the Roshni and Solex beaconsLockable baseMED certification

GBP 44.30
1

Elmdene G13802N-C 12V Switch Mode Power Supply Unit 2A C-Box

Elmdene G13802N-C 12V Switch Mode Power Supply Unit 2A C-Box

Elmdene G13802N-C 12V Switch Mode Power Supply Unit 2A C-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Will accomodate Paxton Net 2 Controller.Fit up to 17Ah battery.C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 56.16
1

Elmdene G13804NU-4 12V Switch Mode Power Supply Unit 4A Unboxed - Module Only

Elmdene G13804NU-4 12V Switch Mode Power Supply Unit 4A Unboxed - Module Only

Elmdene G13804NU-4 12V Switch Mode Power Supply Unit 4A UnboxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty13.8V dc 4A to load Battery Charging Unboxed Module Only SMPSUDIN rail mountable152L x 106W x 71DPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 70.08
1