150 Resultaten (0,18319 seconden)

Toon alle filters

Merk

Verkoper

Prijs (EUR)

Toon alles

Reset filter

Producten
Van
Winkels

Schneider Electric Acti9 Signal contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal bottom 24...230V AC - A9A26914

Schneider Electric Acti9 Signal contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal bottom 24...230V AC - A9A26914

This Acti9 electrical auxiliary is a modular OC contact used as remote indication ot the position of the associated device. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 1 position switch with contacts type 1 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA and iC60 RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. The iOF is either used for device short name or compatibility code. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product colour is white (RAL 9003). The pollution degree is 3. The level of tropicalisation is treatment 2. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type. According to IEC 60529 sta

EUR 24.82
1

Schneider Electric Acti9 Signal & Alarm contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal top & bottom 24...230V AC & 24...220V DC

Schneider Electric Acti9 Signal & Alarm contact iOF 1OC 2mA to 100mA for iC60 RCBO iC40 iCV40 screw terminal top & bottom 24...230V AC & 24...220V DC

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

EUR 42.14
1

Schneider Electric Resi9 XP RCBO/combination switch 1PN C-characteristic 13A 6kA 30mA class A 36mm - R9D55613

Schneider Electric Resi9 XP RCBO/combination switch 1PN C-characteristic 13A 6kA 30mA class A 36mm - R9D55613

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

EUR 53.83
1

Schneider Electric Resi9 XP RCBO/combination switch 3PN C-characteristic 10A 6kA 30mA class A 90mm - R9D55710

Schneider Electric Resi9 XP RCBO/combination switch 3PN C-characteristic 10A 6kA 30mA class A 90mm - R9D55710

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected poles and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 10. The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The product colour is white (RAL 9003). The product weight is 500g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mo

EUR 72.81
1

Schneider Electric Loop rail 8 pole for connection of RGZE and RSZE sockets for RXG and RSB relays - RGZS08

Schneider Electric Loop rail 8 pole for connection of RGZE and RSZE sockets for RXG and RSB relays - RGZS08

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

EUR 9.01
1

Schneider Electric Auxiliary/signal contact OF or SD for GV4 for mounting under the front cover - GV4AE11

Schneider Electric Auxiliary/signal contact OF or SD for GV4 for mounting under the front cover - GV4AE11

TeSys GV4 stands out by being both compact and high performance. The device is intended for mounting on DIN rail and is only 81 millimeters wide. Nevertheless, the rated current rises up to 115A and has three breaking levels of 25, 50 or 100 kA.In addition, TeSys GV4 offers both operating classification 10 (normal start) and 20 (heavy start). This makes it the obvious choice for a multitude of different applications, regardless of the specifics of the individual application.TeSys GV4 is also perfect for machines that need to be exported to customers outside of Denmark. It is therefore certified according to all relevant international standards (UL, JIS, ATAX, CCC, EAC and EU) and therefore approved for use worldwide, including North America and Asia.The motor switch can be used both as a main circuit breaker in a control panel and as an individual protection in front of motors. The smart connection with EverLink terminals ensures that the TeSys GV4 cables are always properly tensioned, even with vibration or motion in the cables.Three types GV4L: Magnetic switch GV4P: Thermomagnetic switch with overload setting. GV4PEM: Thermomagnetic switch with overload setting and advanced protection and alarm Many options - wide application Only one physical size: 81 mm wide, mounted on DIN rail Rated current up to 115A, 3P (choose 2, 3, 5, 7, 12, 25, 50, 80 or 115A) up to 55kW (400VAC) Three levels of break power: 25, 50 or 100 kA (415V) Dual operation classification: 10 (normal start) and 20 (heavy start)

EUR 27.50
1

Schneider Electric Resi9 XP MCB/circuit breaker 3PN C-characteristic 13A 6kA 54mm - R9P19713

Schneider Electric Resi9 XP MCB/circuit breaker 3PN C-characteristic 13A 6kA 54mm - R9P19713

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

EUR 18.95
1

Schneider Electric Resi9 XP MCB/circuit breaker 3PN C-characteristic 10A 6kA 54mm - R9P19710

Schneider Electric Resi9 XP MCB/circuit breaker 3PN C-characteristic 10A 6kA 54mm - R9P19710

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 10A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

EUR 18.00
1

Schneider Electric Resi9 XP MCB/circuit breaker 1PN C-characteristic 13A 6kA 18mm - R9P19613

Schneider Electric Resi9 XP MCB/circuit breaker 1PN C-characteristic 13A 6kA 18mm - R9P19613

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 2. The dimensions are (W) 18mm x (H) 81mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 110g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

EUR 9.55
1

Schneider Electric Modbus tcpip expansion modules for the xpsmcm safety controller - XPSMCMCO0000EM

Schneider Electric Modbus tcpip expansion modules for the xpsmcm safety controller - XPSMCMCO0000EM

Preventa XPS MCM safety controller is a modular safety controller there can handle up to 128 safety signals and 16x2 safety output signals. The controller shall be programmed, from the free configuration software SoSafe. MODBUS TCPIP expansion modules for the XPSMCM safety controller, the communication is only for non safety signals to or from the PLC or other logic components. The field bus expansion modules can only be configured by the SoSafe software. You can add one communication module pr application. Screw terminals.

EUR 531.41
1