23 resultater (0,19866 sekunder)

Merke

Farge

Butikk

Pris (EUR)

Nullstill filter

Produkter
Fra
Butikker

Philips Senseo Original ECO Cashmere Grey HD6552/32 - Kaffe Espresso

Philips Hf-pi 3/4 14/24 tl5/pl-l eii 220-240v - Drivere spoler og transformatorer

Philips Bsn 70 l33-ts 230v 50hz hd1-118 - Drivere spoler og transformatorer

Philips Hf-ri td 2 14/21/24/39 e+ - Drivere spoler og transformatorer

Philips Hf-pi 1 28/35/49/54 tl5 eii 220-240v - Drivere spoler og transformatorer

Philips Hf-ri td 2 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Philips Hf-ri td 2 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the systems mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) - combined with MASTER TL5 Eco the most energy-efficient solution HF operation improves light quality and lamp lifetime. Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment The HF-R intelligent will recognize which lamp is connected and will drive it accordingly Extremely low energy consumption in stand-by (0.25 W) Optimized for MASTER TL5 Eco lamps RoHS and ISO 14000-compliant EEI = A1 BAT (Best available technology)Application Indoor, general and task lighting applications in combination with lighting control systems (personal con

NOK 890.00
1

Philips Hf-ri td 1 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Philips Hf-ri td 1 28/35/49/54 tl5 e+ 195-240v - Drivere spoler og transformatorer

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the systems mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) - combined with MASTER TL5 Eco the most energy-efficient solution HF operation improves light quality and lamp lifetime. Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment The HF-R intelligent will recognize which lamp is connected and will drive it accordingly Extremely low energy consumption in stand-by (0.25 W) Optimized for MASTER TL5 Eco lamps RoHS and ISO 14000-compliant EEI = A1 BAT (Best available technology)Application Indoor, general and task lighting applications in combination with lighting control systems (personal con

NOK 1059.00
1

Philips Video Monitor - Babyutstyr

Philips Video Baby Monitor Avanced - Babyutstyr

Philips Hf-p 249 tl5 ho iii 220-240v 50/60hz idc - Drivere spoler og transformatorer

Philips Hf-p 249 tl5 ho iii 220-240v 50/60hz idc - Drivere spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp Programmed, flicker-free, pre-heated start ( 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations The unit is protected against excessive mains voltage and incorrect connections The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). The programmed start enables the lamp to be switched on and off without reducing useful lamp life. DC emergency operation in line with IEC/EN 60598-22 luminaire norms Suitable for luminaires in protection class I and, after testing, class IIApplications Used with movement-detection control systems like Philips OccuPlus Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools Class I outdoor applications, e. g. industrial premises and parking lot

NOK 364.00
1

Philips Hf-p 254/255 tl5 ho/pl-l iii idc - Drivere spoler og transformatorer

Philips Hf-p 254/255 tl5 ho/pl-l iii idc - Drivere spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp Programmed, flicker-free, pre-heated start ( 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations The unit is protected against excessive mains voltage and incorrect connections The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). The programmed start enables the lamp to be switched on and off without reducing useful lamp life. DC emergency operation in line with IEC/EN 60598-22 luminaire norms Suitable for luminaires in protection class I and, after testing, class IIApplications Used with movement-detection control systems like Philips OccuPlus Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools Class I outdoor applications, e. g. industrial premises and parking lot

NOK 308.00
1

Philips Hf-p 2 14-35 tl5 he iii 220-240v 50/60hz - Drivere spoler og transformatorer

Philips Hf-p 2 14-35 tl5 he iii 220-240v 50/60hz - Drivere spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp Programmed, flicker-free, pre-heated start ( 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations The unit is protected against excessive mains voltage and incorrect connections The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). The programmed start enables the lamp to be switched on and off without reducing useful lamp life. DC emergency operation in line with IEC/EN 60598-22 luminaire norms Suitable for luminaires in protection class I and, after testing, class IIApplications Used with movement-detection control systems like Philips OccuPlus Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools Class I outdoor applications, e. g. industrial premises and parking lot

NOK 430.00
1

Philips Hf-p 1 14-35 tl5 he iii 220-240v 50/60hz - Drivere spoler og transformatorer

Philips Hf-p 1 14-35 tl5 he iii 220-240v 50/60hz - Drivere spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp Programmed, flicker-free, pre-heated start ( 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations The unit is protected against excessive mains voltage and incorrect connections The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). The programmed start enables the lamp to be switched on and off without reducing useful lamp life. DC emergency operation in line with IEC/EN 60598-22 luminaire norms Suitable for luminaires in protection class I and, after testing, class IIApplications Used with movement-detection control systems like Philips OccuPlus Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools Class I outdoor applications, e. g. industrial premises and parking lot

NOK 314.00
1

Philips Hf-p 149 tl5 ho iii 220-240v 50/60hz idc - Drivere spoler og transformatorer

Philips Hf-p 149 tl5 ho iii 220-240v 50/60hz idc - Drivere spoler og transformatorer

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp Programmed, flicker-free, pre-heated start ( 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations The unit is protected against excessive mains voltage and incorrect connections The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). The programmed start enables the lamp to be switched on and off without reducing useful lamp life. DC emergency operation in line with IEC/EN 60598-22 luminaire norms Suitable for luminaires in protection class I and, after testing, class IIApplications Used with movement-detection control systems like Philips OccuPlus Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools Class I outdoor applications, e. g. industrial premises and parking lot

NOK 503.00
1

Philips Video Baby Monitor Premium - Babyutstyr

Philips Video Baby Monitor Premium - Babyutstyr

Philips Townguide bdp102 grn35-/830 ii dw pcf si ls-8 62p - Lamper

Philips Townguide bdp102 grn35-/830 ii dw pcf si ls-8 62p - Lamper

TownGuide Performer - Designed around your needs The TownGuide Performer family consists of five recognizable yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic and T. All are available with either a clear or frosted bowl. With an extensive range of lumen packages and a choice of light colors and operating lifetimes, it is easy to select the version that best suits your projects specific requirements. In addition, TownGuide Performer has a variety of control system options that can make it an integral part of your smart energy-reduction programs - from stand-alone LumiStep and DynaDimmer, SDU switch-dim control, through to seamless remote connectivity with CityTouch lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, the luminaire does not have to be opened at all for installation. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, the energy and maintenance cost savings compared to conventional lighting are significant. Dedicated LED luminaire, optimized for minimum Total Cost of Ownership Wide choice of lumen packages, ranging from 1,200 to 7,000 lumens (GRN) or 4,000 to 12,000 lumens (ECO) Choice of three light colors: 3000 K (warm white), 4000 K (neutral white) and 5000 K (cool white) Long lifetime of 100,000 hours (GRN) or 70,000 hours (ECO) at L80F10 Bayonet whistle connector for easy installation without opening the luminaire Suitable for new installations or one-to-one replacement in existing installations Vandal-resistant (IK10), ingress protection (IP66) TailorFit PCB technology Standard 3-year warranty program, as a service, we offer extended warranties or lifecycle services Five recognizable yet modern designs that blend in wit

NOK 5829.00
1

Philips Hf-regulator 149 tl5 eii 220-240v 50/60hz - Drivere spoler og transformatorer