KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Aico Ei630i Heat Alarm - 10 Year Lithium Battery Powered

Aico Ei630i Heat Alarm - 10 Year Lithium Battery PoweredThe Ei630i is a battery powered Heat Alarm that contains a sealed in tamper proof lithium battery that will last for the full 10 year life of the alarm.Battery and LifespanThe Ei630i is a battery powered Heat Alarm that contains a sealed in tamper-proof lithium battery that will last for the full 10 year life of the alarm.Built-in AudioLINK TechnologyThis second iteration of the award-winning AudioLINK technology makes it simple to get real-time data from the Ei630i Heat Alarm via the AudioLINK app. The App generates a simple to read colour-coded report giving information on a range of alarm data such as alarm activations sensor status and record of testing.Key FeaturesHeat sensor responds to heat build-up from large flaming fires triggers at 58C10 year Lithium battery poweredEasy to fit twist on base and multi-fixingsKitemarked to BS 5446-220035 year guarantee

GBP 31.20

1

Aico EI3016EF Eco-Fit Pack Optical Smoke Alarm - 230V with 10 Year Rechargeable Lithium Battery

Aico EI3016EF Eco-Fit Pack Optical Smoke Alarm - 230V with 10 Year Rechargeable Lithium BatteryThe Ei3016EF is an eco-fit pack containing ten Ei3016 mains powered Optical Smoke Alarms with 10 Year Rechargeable Lithium Back-up.eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.Key FeaturesEco-fit pack containing ten Ei3016 Optical Smoke AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium Back-up

GBP 728.81

1

Aico EI3014EF Eco-Fit Pack - Heat Alarm - 230V with 10 Year Rechargeable Lithium Back-Up

Aico EI3014EF Eco-Fit Pack - Heat Alarm - 230V with 10 Year Rechargeable Lithium Back-UpThe Ei3014EF is an Eco-fit pack containing ten Ei3014 mains powered Heat Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.Key FeaturesEco-fit pack containing ten Ei3014 Heat AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseHeat sensor - responds to heat build-up from large flaming firesMains powered with rechargeable lithium Back-up

GBP 758.82

1

Aico Ei630iRF RadioLINK Heat Alarm - 10 Year Lithium Battery Powered with AudioLink

Aico Ei630iRF RadioLINK Heat Alarm - 10 Year Lithium Battery Powered with AudioLink The Ei630iRF Heat Alarm is powered by a lithium primary battery and is activated by heat from a fire not smoke. This makes it ideal for kitchen installations where smoke alarms are prone to nuisance alarms. The thermistor will trigger the alarm when the activation temperature of 58C is reached.Built-in RadioLINK TechnologyThe Ei630iRF Heat Alarm has built-in RadioLINK technology and is able to wirelessly interconnect with any other RadioLINK products.Built-in AudioLINK TechnologyThis second iteration of the award-winning AudioLINK technology makes it simple to get real-time data from the Ei630iRF Heat Alarm via the AudioLINK app. The App generates a simple to read colour-coded report giving information on a range of alarm data such as alarm activations sensor status and record of testing.Battery and LifespanThe Ei630iRF is a battery powered Heat Alarm that contains a sealed in lithium battery that will last for the full 10 year life of the alarm.Key FeaturesHeat sensor responds to heat build-up from large flaming fires triggers at 58C10 year lithium battery poweredLarge test button and twist on base with an anti-tamper locking option.RadioLINK wireless interconnectionKitemarked to BS 5446-220035 year guarantee

GBP 100.98

1

Aico EI650i Optical Smoke Alarm - 10 Year Lithium Battery Powered

Aico EI650i Optical Smoke Alarm - 10 Year Lithium Battery PoweredFunctioning as a standalone unit the Ei650i Optical Alarmis best for detecting slow smouldering fires commonly produced by electricalfires or flammable materials. This Optical Fire Alarm is best placed in thehallway landing living room or dining room.This battery powered alarm contains sealed in tamper-prooflithium battery that will last for the full 10-year life of the alarm. Thealarm is not powered until it is twisted on the mounting base thus avoidingbattery power consumption during storage and prior to installation.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in dust compensation technologyBuilt-in AudioLINK technologyEasy to fit with twist on base multi-fixings andanti-tamper locking optionEasy to use large test buttonGrade F1 and Kitemarked to BS EN 146042005

GBP 31.43

1

Aico EI650iRF RadioLINK Optical Smoke Alarm - 10 Year Lithium Battery Powered - With AudioLink

Aico EI650iRF RadioLINK Optical Smoke Alarm - 10 Year Lithium Battery Powered - With AudioLink The Ei650iRF is a battery-powered Optical Smoke Alarm. It is able to wirelessly interconnect with any other RadioLINK RadioLINK and SmartLINK products. Contains an Optical Smoke ChamberThe Ei650iRF RadioLINK Optical Smoke Alarm is best for detecting slow smouldering fires commonly produced by electrical fires or sofas and is less likely to react to cooking smells if fitted in the hallway next to the kitchen.Battery and LifespanThis battery powered alarm contains sealed in tamper-proof lithium battery that will last for the full 10-year life of the alarm. The alarm is not powered until it is twisted on the mounting base thus avoiding battery power consumption during storage and prior to installation.Built-in RadioLINK Wireless Interconnection TechnologyRadioLINK wireless interconnection technology is built-in to this alarm. RadioLINK uses Radio Frequency signals to link alarms together with added functionality. All RadioLINK alarms and devices should be House Coded together upon install.Key FeaturesOptical sensor with dust compensation technologyBuilt-in AudioLINKUses built-in RadioLINK technology to interconnect and for data extractionConnects wirelessly with all other Aico wireless interconnection productsBattery powered with a sealed-in lithium batteryEasy to fit twist on base and multi-fixings with an anti-tamper locking option10-year lifeGrade F1 and compliant with Scottish legislationKitemarked to BS EN 146042005

GBP 94.61

1

Aico EI3018EF Eco-Fit Pack - CO Alarm - 230V With 10 Year Rechargeable Lithium Back-up

Aico EI3018EF Eco-Fit Pack - CO Alarm - 230V With 10 Year Rechargeable Lithium Back-upAico EI3018EF ECOFIT 10 Pack of Carbon Monoxide Alarms. The eco-fit range is available across the 3000 Series of single and multi-sensor alarms offering the same renowned technology and high quality.The Ei3018 Carbon Monoxide Alarm has a high performance proven electrochemical sensor to monitor Carbon Monoxide CO levels in the household. The sensor is individually calibrated and tested in Carbon Monoxide gas to ensure it is completely accurate in its detection.Key FeaturesEco-fit pack containing ten Ei3018 Carbon Monoxide AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 895.92

1

Aico EI660i Multi-Sensor Fire Alarm With 10 Year Lithium Cells With AudioLINK

Aico EI660i Multi-Sensor Fire Alarm With 10 Year LithiumCells With AudioLINKThe Ei660i is a battery-powered Multi-Sensor Fire Alarmcontaining two proven reliable sensors Optical and Heat. The intelligentalarm software actively monitors both sensors allowing them to work togetherand provide total fire coverage.The Ei660i Multi Sensor Fire Alarm uses Optical and Heatsensors to detect all fire types with an increased resistance to false alarms.Its ability to respond quickly to both fast flaming and smouldering firessimplifies alarm choice for the designated roomsareas including the hallwaylanding living room dining room bedroom and loft spaces.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in AudioLINK technologyBuilt-in dust compensation technologyTwist on base with an anti-tamper locking optionGrade F1 and kitemarked to BS EN146042005 and BS5446-22003Easy to use large test button

GBP 61.51

1

Aico EI660iRF Multi-Sensor RF Fire Alarm With 10 Year Lithium Cells with AudioLINK amp RadioLINK

Aico EI660iRF Multi-Sensor RF Fire Alarm With 10 YearLithium Cells with AudioLINK RadioLINKThe Ei660iRF is a battery-powered Multi-Sensor Fire Alarmwhich can wirelessly interconnect with any other RadioLINK and SmartLINKproducts.The Multi-Sensor Fire Alarm contains two proven reliablesensors Optical and Heat. The intelligent alarm software actively monitorsboth sensors allowing them to work together and provide total fire coverage.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in RadioLINK and AudioLINK technologyBuilt-in dust compensation technologyTwist on base with an anti-tamper locking optionGrade F1 and compliant with Scottish legislationKitemarked to BS EN 146042005 and BS 5446-22003Easy to use large test button

GBP 133.55

1

Aico EI1000G SmartLINK Gateway - Mains with Lithium Back-up

Aico EI1000G SmartLINK Gateway - Mains with Lithium Back-upThe SmartLINK Gateway is designed for use with the Aico RF devices. It provides a mechanism to transfer information from the RF network to a portal over the GSM network.It is mains powered with a rechargeable battery backup that can provide up to 72hrs of power supply in case of mains failure.Connected devices events are processed by the Gateway as they occur and cover events such asFire AlarmCO level detected High Medium LowButton TestMains Absent FaultHead OKHead RemovedEnd of lifeTo ensure the safety of the data it is encrypted in both directions during transmission using AES128 encryption.In addition for ease of installation the SmartLINK App available on Android iOS provides a step-by-step guide for the installation of the Gateway and the Aico RF devices.All data sent is accessible from a web portal where alerts can be set up to be delivered by email or SMS. Reports can also be run from the web portal to facilitate the management of the Alarms fitted.The data on the portal is securely stored and is only available to the associated client.Key FeaturesEnables remote management of RF AlarmsReceives RF specific data from RF devicesTransmits data over GSM networkNot GSM provider dependentBidirectional data encryptionUnique House Coding featureEasy setup and configurationCompatible with SmartLINK RadioLINKProvides specific data from radio frequency devicesHeart beat every 12 hours which gets sent to the portalTo connect to your smart device and portal you simply scan QR codes on alarm and moduleEasy installation and configurationTransmits data over GSM networkUnique house coding featureData upload 2G GSM network roaming sim card supplied no subscription necessaryFrequency 868MHz band 1 duty cyclePower usage 40mAVoltage 230VBattery back-up Rechargeable batteryProtocol Proprietary RF Protocol using multi-path multi-repeater mesh architectureRF Range 100 metres in free air depending on obstructionsNumber of devices Up to 12 RF devicesIndicator LEDs 3 colour LED blue green and redData requirements Monitoring via Ei1000G gateway download via EiUSB1Operating temperature -10C to 40CHumidity range 15 to 95 relative humidityMaterial PlasticHeight 150mmWidth 145mmDepth 55mm

GBP 350.89

1

Aico EI3030 Multi-Sensor Fire and CO Alarm 230V

Aico EI3030 Multi-Sensor Fire and CO Alarm 230VThe Ei3030 Fire Carbon Monoxide Multi-Sensor Alarm isthe latest edition to the technologically advanced 3000 Series. CombiningOptical Heat and CO Sensors for the ultimate Fire and CO response whilemaintaining the simplicity that installers love.Containing our proven Thermistor Heat Sensor Optical Sensorand Electrochemical CO Sensor to provide the ultimate response working independentlyand together.Key FeaturesOffering visual indicators that trigger according to whichalarm is activatedBuilt-in intelligent dust compensation technologyeliminating the risk of nuisance alarms from contaminationBuilt-in AudioLINK technologyMains powered with 10-year rechargeable lithium cell back-upGrade D1 and compliant with Scottish legislationKitemarked to BS EN146042005 BS5446-22003 and BS50291 1201810 Year GuaranteeSupplied with an easi-fit base When purchased as part ofthe eco-fit range this product does not include easi-fit bases screw packs ordust covers.10 Year Rechargeable Lithium Battery Back-up SmartLINK upgradable SmokeHeatCO

GBP 130.85

1

Aico EI3028EF Eco-Fit Pack - Multi-Sensor Heat amp CO Alarm - 230V With 10 Year Rechargeable

Aico EI3028EF Eco-Fit Pack - Multi-Sensor Heat CO Alarm - 230V With 10 Year RechargeableThe EI3028EF is an eco-fit pack containing ten EI3028 mains powered Multi-Sensor Heat CO Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.The Ei3028 Multi-Sensor Heat Carbon Monoxide CO Alarm contains our tried and tested thermistor heat sensor and our proven electrochemical CO sensor.Key FeaturesEco-fit pack containing ten alarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 1172.57

1

Aico EI3024EF Eco-Fit Pack - Multi-Sensor Fire Alarm - 230V With 10 Year Rechargeable

Aico EI3024EF Eco-Fit Pack - Multi-Sensor Fire Alarm - 230V With 10 Year RechargeableThe Ei3024EF is an eco-fit pack containing ten Ei3024 mains powered Multi-Sensor Fire Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.The Ei3024 Multi Sensor Fire Alarm is built on the same high quality reliable and proven technology that all Aico Alarms are renowned for but contains the latest high-tech enhancements making it the most effective domestic fire alarm on the market.Key FeaturesEco-fit pack containing ten alarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 779.54

1

Aico Switched Input Module Ei129

Aico Switched Input Module Ei129The Ei129 is a mains powered Switched Input Module with rechargeable lithium cell back up. It will triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.The Ei129 comes with a cover or can be mounted underneath an alarm.Operation of the Ei129When the volt-free contacts connected to the Switched Input Module are closed all interconnected smoke heat and CO alarms will sound.When the device triggering the Switched Input Module resets i.e. when the contacts switch back it will automatically reset and all interconnected alarms will cease sounding.Key FeaturesThis module triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.Mains powered with a rechargeable lithium cell back upConnects with the alarm system through a hard wire interconnectCompatible with the3000Ei2110e Multi-Sensor Fire Alarm160e Seies alarmsand the 140RC Series

GBP 46.00

1

Aico Ei3018 230v 3000 Series Carbon Monoxide Alarm

Aico Ei3018 230v 3000 Series Carbon Monoxide AlarmThe Ei3018 is a Carbon Monoxide CO Alarm powered by 230V AC mains power and has built in tamper proof rechargeable lithium cells that act as a battery back up in the event of mains failure. These rechargeable lithium cells are designed to last the life of the CO alarm. The Ei3018 has a high performance proven electrochemical sensor 10 year life to sense CO presence. The sensor is individually calibrated and tested in CO gas to ensure accuracy. In alarm the flash rate of the red LED indicates the level of CO detected.The Ei3018 contains AudioLINK technology which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The Ei3018 can operate as a standalone alarm or can be interconnected either by hard-wire or wirelessly using the EI3000MRF module enabling it to communicate with compatible alarms and accessories. Up to 12 devices can be interconnected.The memory feature allows an alarm that has previously activated to be easily identified through the red flashing LED. The alarm is fitted with a large Test Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm system to be silenced in the case of a false nuisance alarms and low battery fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.Key FeaturesSensor Types Electrochemical cell10 year lifeEasi-fit baseAudioLINK data extraction technologyCompatible with other Aico mains powered devicesAdd an Ei3000MRF module for wireless interconnection and data extractionMains powered with 10 year rechargeable lithium cell back-upContains our proven Electrochemical CO sensorSupply Voltage 230V AC 50HzPower Consumption 0.25W standbyBattery Back-up Rechargeable lithium cellsSound Level 85dBA at 3mButton Test Checks sensors electronics and sounderSilence Function Silences alarm for 10 minutesSilence Function Silences fault beeps for 12 hoursAudioLINK EnabledSmartLINK Compatible via the Ei3000MRF ModuleIndicator LEDS Green power. Red pre alarm alarm silence mode memory. Yellow fault eventMemory Records last alarm eventOperating Temperature -10C to 35CHumidity Range 15 to 95 relative humidityPlastic Material UL 94 V0 flame retardantDimensions Product 150mm x 55mmDimensions Boxed 180mm x 155mm x 62mmWeight 310g product only 376g boxedGuarantee 5 years

GBP 89.60

1

Aico Ei3016 230v 3000 Series Optical Smoke Alarm

Aico Ei3016 230v 3000 Series Optical Smoke AlarmThe Ei3016 Optical Smoke Alarm contains a high-performance optical smoke sensor which is best for detecting slow smoldering fires. In addition the smoke chamber design integrated insect screen and unique automatic dust compensation reduce the risk of false alarms. The Ei3016 runs on 230V AC mains power. In the event of mains failure the 10 Year built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.The Ei3016 contains AudioLINK technology which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The Ei3016 self-checks its sensor battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes andor audible beeps. The memory feature allows an alarm that has previously activated to be easily identified through the red flashing LED.The alarm is fitted with a large Test Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm system to be silenced in the case of a false nuisance alarms and low battery fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.Key FeaturesContains a high-performance optical sensorMains powered with 10-year rechargeable Lithium cell back-upCompatible with interconnection and monitoring technologyAudioLINK TM Data extraction technologyDust compensation - unique self-monitoring mechanismEasi-Fit base10 Year lifeSensor Type OpticalSupply Voltage 230V AC 50HzPower Consumption 0.25W standbyBattery Back-up Rechargeable lithium cellsSound Level 85dBA at 3mButton Test Checks sensor electronics and sounderSilence Function Silences alarm for 10 minutesSilence Function Silences fault beeps for 12 hoursAudioLINK EnabledSmartLINK Compatible via the Ei3000MRF ModuleIndicator LEDS Green power. Red alarm silence mode memory. Yellow fault eventMemory Records last alarm eventFixing easi-fit base suppliedOperating Temperature -10C to 40CHumidity Range 15 to 95 relative humidityPlastic Material UL 94 V0 flame retardant

GBP 72.89

1

Aico Relay Module with 5A Relay amp Rechargeable Back-up Ei128RBU

Aico Relay Module with 5A Relay Rechargeable Back-up Ei128RBUThe Ei128RBU is a Relay Module that runs on a 230V AC mains power and has built-in tamper-proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable lithium cells are designed to have a 10-year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power.The Module has a set of Volt free contacts Normally Open and Normally Closed as standard but can be configured to give a 230V output or a 24V output using an external 24V supply.Any combination of30002110e160e 140RC or 260RC Series alarms can be used up to 12 including the Relay.The Module is designed to fit underneath any smoke or heat alarm. However a cover is supplied if there is a need for siting the unit remotely.The Module has additional trunking knock outs for ease of wiring.The Module can give a Continuous or pulse output. The pulse output will switch back the Relay contacts to their original state after 5 seconds operation.Operation of the Ei128RBUOn receiving a signal form the alarm system the Relay contacts will be operated causing a signal to be sent to the device to which it is connected.The Ei128RBU can be used to switch into a range of devices ranging from warden call systems to panel systems.When modified for a 230V or 24V output they can operate a range of different devices.The Module can be switched to give a pulse output or continuous output for different applications.Technical Specification The Relay is designed to operate whilst the alarm system is sounding to signal devices such as panels warden call systems nurse call systems etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.The Relay runs on 230V AC mains power and has built in tamper proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable Lithium cells are designed to have a 10 year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power. It operates on receipt of a signal form the interconnect line of a smoke heat or CO alarm.Volt-free contacts Normally Open or Normally Closed rated up to 240V AC 5 Amps making it suitable for use with a wide range of AC or DC voltages.Any combination of 3000 2110e 160e 140RC or 260RC smoke heat or CO alarms can be interconnected to a maximum of 12 units in total 1 x Ei128RBU counts as one unit.The Ei128RBU is designed for siting under one of the smokeheat alarms listed above. However a cover is supplied if installing remotely or with 260 series CO alarms.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system 1 x Ei128RBU counts as one unit.Fitted with a 4 way connector block for ease of wiring.The Relay can be set for continuous or pulse operation through a manual switch when in pulse operation mode the Relay contacts will automatically switch back to their original state after 5 seconds.Features 3 x 25mm trunking knockouts for surface wiring and centre knockout for recess wiring.Dimensions of unit 135mm diameter x 20mm depth.Weight inclusive of packaging 265g.Manufactured in Ireland.Key FeaturesFor use with 2100 160RC and 140RC alarmsRechargeable lithium battery back-upVolt free contacts as supplied for multiple useCan be configured to switch a 230V or 24V deviceTrunking knock-outs for easy and neat wiringAdditional connectors for ease of wiringContinuous or pulse operationFits discreetly behind any smoke heat alarm5 Year Guarantee

GBP 71.82

1

Aico RadioLINK Switched Input Module Ei408

Aico RadioLINK Switched Input Module Ei408The Ei408 Switched Input Modulehas been designed totriggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.The Ei408 is powered by a tamper proof sealed in lithium cell giving a completely wire free installation with a 10 year life.The unituses RadioLINK to wirelessly interconnect with the rest of the alarm system so once in place you will need toHouse Codethe switch into the alarm system.Operation of the Ei408On receiving a volt-free switched hardwired signal the unit will transmit a RadioLINK alarm signalThe indicator will flash green every 40 seconds to indicate that the lithium cell power supply is healthyIf the Lithium cells are depleted the indicator will flash amber every 10 seconds and the unit needs replacingTechnical SpecificationFor use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.Eliminates the need for any cabling between the Ei408 and the smoke heat and CO alarms used in the system.Features built-in tamper proof FDK Lithium cells capable of lasting at least 10 years under normal usage. Operating the yellow onoff switch sited on the back of the unit activates the cells. The LED on the front cover will flash red amber green on power up after this it will flash green every 40 seconds to indicate a healthy power supply.Low battery warning signal LED indicator flashes amber every 10 seconds to indicate depleted battery. If this occurs the complete unit should be replaced.The unit has built-in wiring terminals for connection to an external set of volt-free switched contacts. On the contacts closing the Ei408 will send out a RadioLINK alarm signal to trigger all other RadioLINK devices within the system.Radio frequency 868 MHz Band in accordance with RTTE Directive 19995EC this band has been designated for use with security products and only allows a 1 duty cycle so continuous transmission and interference form external sources is extremely remote and would be illegal.Range The type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass through. As a guide 30m should be the maximum distance between any of the RadioLINK units in the system.Up to 20 RadioLINK units can be used in one system. Range will be the limiting factor.Units are in Factory Code mode when received they will all communicate with each other. They must be House Coded to eliminate the risk of adjacent properties communicating with each other. After House Coding they will only communicate with other RadioLINK units coded at the same time.House Code Operate the House Code switch on all RadioLINK units in the system see the instructions supplied with other RadioLINK units being used. The green LED on the cover of the Ei428 will change to red and flash slowly this indicates that it will receive the unique serial numbers being sent by all other RadioLINK units in House Code. The number of flashes of the LED indicates the number of units in the system The Ei428 will return to normal standby mode automatically after 15 minutes. Pressing the House Code switch again will return it to normal standby immediately.The Ei408 is conformant to EN300220-1 2000-09 RF Performance and EN301489-3 2002-08 EMC.Designed for surface mounting.Ambient Temperature Range 4C to 40C. Humidity Range 0 to 90 relative humidity.Dimensions 90mm x 90mm x 43mm. Weight inclusive of packaging 240g.5 year guarantee.Manufactured in Ireland.Key FeaturesStand alone unit designed for use with RadioLINK bases AccessoriesAccepts a hardwired input e.g. from sprinkler systemVisual RF transmission and power indicatorPowered by built-in Lithium cellsUnique House CodingLow battery power warningRF performance to EN 300220-15 Year Guarantee

GBP 61.67

1

Aico Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire Alarm

Aico Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire AlarmThe Ei3024 Multi-Sensor Fire Alarm contains both Optical and Heat sensors to provide total fire coverage. Intelligent software allows it to detect all fire types TF1 to TF6 TF8 surpassing traditional single sensor Alarms. In addition the chamber design integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. The Ei3024 runs on 230V AC mains power. In the event of mains failure the 10 Year built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.The Ei3024 contains AudioLINK technology which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The memory feature allows an alarm that has previously activated to be easily identified through the red flashing LED. The Ei3024 self tests its sensors battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes andor audible beeps.The Ei3024 is fitted with a large central Test Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm system to be silenced in the case of a false nuisance alarm and low battery fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.Key FeaturesSensor Types Optical Thermistor10 year lifeEasi-fit baseDust compensation unique self-monitoring mechanismAudioLINK data extraction technologyCompatible with other Aico mains powered unitsAdd an Ei3000MRF module for wireless interconnection and data extractionMains powered with 10 year rechargeable lithium cell back-upContains both an Optical and Heat sensor for a total fire responseSupply Voltage 230V AC 50HzPower Consumption 0.25W standbyBattery Back-up Rechargeable lithium cellsSound Level 85dBA at 3mButton Test Checks sensors electronics and sounderSilence Function Silences alarm for 10 minutesSilence Function Silences fault beeps for 12 hoursAudioLINK EnabledSmartLINK Compatible via the Ei3000MRF ModuleIndicator LEDS Green power. Red alarm silence mode memory. Yellow fault eventMemory Records last alarm eventFixing easi-fit base suppliedOperating Temperature -10C to 40CHumidity Range 15 to 95 relative humidityPlastic Material UL 94 V0 flame retardantDimensions Product 150mm x 66mmDimensions Boxed 180mm x 155mm x 70mmWeight 346g product only 412g boxedGuarantee 5 years

GBP 95.08

1

Aico RadioLINK Alarm Controller Ei450

Aico RadioLINK Alarm Controller Ei450The Ei450 is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke heatand carbon monoxide alarms on the same system as its essential that you can tell which alarm has sounded. From then you can identifywhich danger is present and the action you should take.The Ei450 contains LEDs which clearly display which danger has activated the alarm helping to you take the appropriate action as quickly as possible.Control Switchs increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test Locate and Silencealarms in the systemTestThe alarm systemLocate The alarm that has been activatedSilence Any nuisance alarmsThe Ei450 is powered by a tamper proof sealed in lithium cell giving a completely wire free installation with a 10 year life and connects wirelessly usingRadioLINK interconnection technology so once in place you will need toHouse Codethe switch into the alarm system.Technical SpecificationSupply Voltage 3V Lithium Battery Powered for life.Battery Life 10 years normal operating conditions.Communication 868.499Mhz RadioLINK protocol.Fixing Wall mounting fixtures supplied.Operating Temperature 0C to 40C.Humidity Range 15 to 95 relative humidity.Button functionsTest Test alarms.Locate Identify triggered alarms.Silence Silence alarms.IndicatorsFire Illuminates when fire detected.CO Illuminates when CO detected.EOL illuminates to indicate End of Life.Memory Identifies previously triggered alarms.Diagnostics Walk round test Extended two minute test.Plastic Material UL94HB.Dimensions Product 90mm x 90mm x 30mm.Dimensions Boxed 153mm x 153mm x 40mm.Weight 110g product only 185g boxed.Guarantee 5 years.Approvals CE certified RF EN 300 220-2 EMC EN 301 489-1 EN 301 489-3 EMC.

GBP 85.26

1

Aico EI3028 Series Heat amp Carbon Monoxide Multi-Sensor Fire Alarm

Aico EI3028 Series Heat Carbon Monoxide Multi-Sensor Fire AlarmThe Ei3028 is a Multi-Sensor Heat and Carbon Monoxide CO Alarm. It contains our proven fast acting Class A1 Thermistor sensor to detect fire as well as our proven electrochemical CO sensor to detect the presence of toxic levels of CO. This provides protection from both Fire and CO in one alarm. The Ei3028 runs on 230V AC mains power. In the event of mains failure the 10 Year built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.The Ei3028 contains AudioLINK technology which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. During an alarm Fire or CO indicators will flash on the Alarm to indicate what has been detected. There will also be a different alarm sound depending on what has triggered the alarm. The Ei3028 is fitted with a large Test Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm system to be silenced in the case of a false nuisance alarms and low battery fault beeps.The Ei3028 self-tests its sensors battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes andor audible beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.Key FeaturesSensor Type Thermistor Electrochemical CO10 year lifeEasi-fit baseHeat or CO indicator on alarm headAudioLINK data extraction technologyCompatible with other Aico mains powered unitsAdd and Ei3000MRF for wireless interconnection and data extractionMains powered with 10 year rechargeable lithium cell back-upContains both a Heat and Electrochemical CO sensor Heat and CO coverage in one alarmSupply Voltage 230V AC 50HzPower Consumption 0.25W standbyBattery Back-up Rechargeable lithium cellsSound Level 85dBA at 3mButton Test Checks sensors electronics LED displays and sounderSilence Function Silences alarm for 10 minutes if alarm is triggered by heat or once for 4 minutes in case of CO event.Silence Function Silences fault beeps for 12 hoursAudioLINK EnabledSmartLINK Compatible via the Ei3000MRF ModuleIndicator LEDS Green power. Red pre-alarm CO only alarm silence mode memory or battery event. Yellow fault eventMemory Records last alarm eventFixing easi-fit base suppliedOperating Temperature -10C to 35CHumidity Range 15 to 95 relative humidityPlastic Material UL 94 V0 flame retardantDimensions Product 150mm x 66mmDimensions Boxed 180mm x 155mm x 72mmWeight 318g product only 384g boxedGuarantee 5 years

GBP 117.24

1

Aico Ei414 RadioLINK FireCO Alarm Interface

Aico Ei414 RadioLINK FireCO Alarm InterfaceThe Ei414 Fire CO Alarm Interface provides either a wireless interface via RF or a hard wired interface via a link cable between a RadioLINK Alarm system and a Warden Call Telecare System.The Ei414 decodes RF Fire and or CO signals from the RadioLINK and RadioLINK devices and activates the relevant onboard relays. The relays must be wired to the universal RF transmitters or via a special link cable to the Warden Call Systems. The Warden Call System in turn is programmed to perform the desired function on receipt of these signals.The Ei414 can deliver either a pulse signal or a continuous switched signal via the relays to the universal transmitters. The specific signal type will be determined by the requirement of the OEM universal sensor.The Ei414 contains x3 mains rated relays rated upto 250V AC 5 Amps. The relay contacts operate on mains power or on battery back-up cells in the event of a mains failure.The Ei414 has a key switch with 3 positionsON - Sends a signal from an Aico Alarm but not a ControllerTEST - Sends a signal from an Aico Alarm and ControllerOFF - No signal sent from an Aico Alarm or ControllerThe Ei414 uses RadioLINK multi-repeater multi-path technology to deliver very robust and reliable RF signal coverage. While designed primarily to interface with a Warden Call or similar Telecare system the versatility of the Ei414s electrically isolated contacts means it can be used to switch many other OEM devices.Key FeaturesConnect your Smoke Heat and CO Alarms system to external devices e.g. Warden Call and other Telecare systemsPowered by either mains 240V AC or 10-30V DC external sourceRechargeable lithium cell back-upVolt free contacts outputs NO NC for Alarm Fire CO messages and fault messages3 position key switchClear Indicator LEDsContains for wireless communication with Alarms and DevicesAllows for simple testing of domestic and external systemsConnects wirelessly with all other Aico wireless interconnection productsMains powered with rechargeable lithium cell back upInterfaces with TelecareWarden Call devices Sprinkler systems and many moreUses RadioLINK wireless interconnection technology to connect with domestic alarms and accessories

GBP 252.16

1

Aico Plug-in RadioLINK module Ei200MRF

Aico Plug-in RadioLINK module Ei200MRFThe Ei200MRF is a module that fits into Ei208W battery Carbon Monoxide alarm so that the unit can use RadioLINK interconnection to link with other alarms. The module simply plugs into the designated slot in the base of the alarm head with flashing LEDs indicating that the module has been fitted correctly.As with other RadioLINK products the once the Ei200MRF module has been fittedthe alarmwill need to belinked into the alarm system or House Coded. View ourstep by step guide to House Coding here.Technical SpecificationSupply Voltage 3V lithium battery.RF frequency 868.499Mhz RadioLINK protocol.RF Power 10dBm.RF Protocol Proprietary RadioLINK using multi-path multi-repeater mesh architecture.RF Range 100 Meters in free air.System Size 12 RadioLINK devices max.Operating Temperature 0 to 40C. Storage 0 to 35C in a dry area.Humidity Range 15 to 95 relative humidity.IndicatorsBlue LED Typically RF transmission house code mode indicator code reset.Green LED Typically monitoring mode indicator alternating with blue LED to indicate monitoring success.Red LED Typically monitoring mode cancel alternating with blue LED to indicate monitoring failure.Dimensions Product 60mm x 30mm x 20mm.Weight 25g.Guarantee 5 years limited guarantee.Approvals CE certified EN 300220-2 Radio EN301489-3 EMC EN624792010 Safety.

GBP 74.56

1

Aico Ei208 Carbon Monoxide CO Alarm

Aico Ei208 Carbon Monoxide CO AlarmThe Ei208 is a Carbon Monoxide CO Alarm that is powered by a sealed in lithium battery. The alarm has a high performance proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in CO gas on assembly to ensure accuracy. The alarm has a twist on mounting base which has multiple fixing points so it can easily be secured to a ceiling or wall.The memory feature records the last CO level sensed and can be useful to check if CO has been present if the home owner or tenant has been absent from the property. An easy to use test hush button allows the user to test the alarm .this checks all aspects of the alarm Sensor electronics sounder. The alarm has an End of Life indicator which will notify the user when the alarm needs replacing at the end of its seven year life.Key FeaturesProven Electrochemical Sensor 7 year lifeLithium Battery sealed inEasy to use large Test Hush buttonPre alarm LED gives early warning of COMemory feature records if Carbon Monoxide CO has been detectedEnd of life indicatorLoud distinctive alarm sound 85db A at 3 metersPower alarm and fault indicator lightsKitemarked to BS EN501291-12010 BS EN50291-220105 Year Guarantee

GBP 31.25

1

Aico RadioLINK Relay Module with 5A Relay amp Rechargeable Battery Back-up Ei428

Aico RadioLINK Relay Module with 5A Relay Rechargeable Battery Back-up Ei428The Ei428 is a mains powered relay module that triggers external devices such as a strobe light or telecare deviceif the alarmsin the propertyactivate.For use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.The module has additional trunking knock outsto make as easy to install as possibleand is designed to fit underneath the space of easi-fit or RadioLINK base. However a cover Ei128COV is available if needed and containsa set of volt free contacts as standard.The replay module can beconfigured to give a 230V output or a 24V output using an external 24V supplyOperation of Ei428 RadioLINK Relay ModuleOn receiving a RadioLINK signal from one of the alarms in the system the relay contacts will be operated causing a signal to be sent to the system to which it is connectedThe indicator on the cover will show a constant green light when the mains power is connected.Technical SpecificationA relay module with cover to allow flexibility in siting.For use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.Eliminates the need for any cabling between the Ei428 and the smoke heat and CO alarms used in the system.Requires 230V AC Mains Power Supply Green LED to indicate mains power is present.Features built-in tamper proof Rechargeable Vanadium Pentoxide lithium standby cells capable of lasting at least 10 years and powering the module initially for at least 2 months in the event of mains power failure. The cell manufacturer endorses a minimum 10-year life expectation for the rechargeable cells which are activated by operating the battery switch inside the module.The product is CE marked to indicate conformance to BS EN 600651998 Electrical Safety EN300220-1 V1.3.1 2000-09 RF Performance EN301489 V1.4.1 2002 08 EMC and has been 3rd party tested for electrical safety in accordance with Annex K of BS 5446 Pt.12000.Radio frequency 868 MHz Band in accordance with RTTE Directive 19995EC this band has been designated for use with security products and only allows a 1 duty cycle so continuous transmission and interference form external sources is extremely remote and would be illegal.Range The type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass through. As a guide 30m should be the maximum distance between any of the RadioLINK units in the system.Up to 20 RadioLINK units can be used in one system. Range will be the limiting factor.Low back-up warning signal LED indicator flashes RED every 10 seconds to indicate that the lithium cells are depleted.Units are in Factory Code mode when received they will all communicate with each other. They must be House Coded to eliminate the risk of adjacent properties communicating with each other. After House Coding they will only communicate with other RadioLINK units coded at the same time.House Code Operate the House Code switch on all RadioLINK units in the system see the instructions supplied with other RadioLINK units being used. The green LED on the cover of the Ei428 will change to red and flash slowly this indicates that it will receive the unique serial numbers being sent by all other RadioLINK units in House Code. The number of flashes of the LED indicates the number of units in the system The Ei428 will return to normal standby mode automatically after 15 minutes. Pressing the House Code switch again will return it to normal standby immediately.Volt free contacts Normally Open or Normally Closed rated up to 240V AC 5 Amps making it suitable for use with a wide range of AC or DC voltages. The relay contacts operate on mains power or on back-up cells in the event of mains failure.A RadioLINK Manual Call Point Ei407 and remote control switches Ei450 Ei412 and Ei411H are also available for use in the system. See separate specification sheets for further information.Features 1 x 25mm trunking for for surface wiring and centre knockout for recess wiring.Ambient Temperature Range 4C to 40C. Humidity Range 0 to 90 relative humidity.Dimensions 140mm diameter x 27mm depth weight inclusive of packaging 220g.5 year guarantee.Manufactured in Ireland.Key FeaturesDesigned for use with all RadioLINK Professional alarms and accessoriesRechargeable Lithium battery back-upVolt-free contacts as supplied for multiple usesCan be configured to switch a 230V or 24V outputTrunking knock-outs for easy and neat wiringContinuous or Pulse operation5 Year Guarantee

GBP 98.36

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)