28 results (0,56488 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo 45682-800APO XPERT Universal Address Card Pack of 25

Apollo 45682-800APO XPERT Universal Address Card Pack of 25

Apollo 45682-800APO XPERT Universal Address Card Pack of 25The Universal XPERT Address Card has been designed to allow the same card to be used on both XPERT 7 XPERT 8 bases.AddressingTo set an address using the XPERT Universal Address Card you have to remove the pips using a screwdriver. The pips are designated with numbers. Each removed pip is added together to provide the final address.Key FeaturesAllows installation in all base types meaning you only need to carry this one type of card alleviating the need for multiple cards when using Apollo products.Flexibility to create any address includes 128th pip for CoreProtocol systemsAn additional lead-in on the address pips allows for a higher toleranceSimplifies and speeds up installation and commissioningAddress remains the same no matter how often the detectors are replaced

GBP 6.40
1

Apollo 45682-860APO Black XPERT Universal Address Card Pack of 10

Apollo 45682-860APO Black XPERT Universal Address Card Pack of 10

Apollo 45682-860APO Black XPERT Universal Address Card Pack of 10The Universal XPERT Address Card has been designed to allow the same card to be used on both XPERT 7 XPERT 8 bases.AddressingTo set an address using the XPERT Universal Address Card you have to remove the pips using a screwdriver. The pips are designated with numbers. Each removed pip is added together to provide the final address.Key FeaturesAddress pips have additional lead-in for a higher toleranceSimplifies and speeds up installation and commissioningAddress remains the same no matter how often the detectors are replacedIncludes 128th pip for CoreProtocol systems

GBP 4.06
1

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range RedSpare singular blank XPERT card in red for the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Brand Featuresmodern styling loop-powered interface operating on 868MHz wireless addresses seen by control panel as normal addresses radio base with wireless circuitry and battery compartment chamber designed to inhibit dirt penetration and thus reduce false alarms automatic drift compensation with DirtAlert warning algorithms for transient alarm rejection FasTest reduces time taken to test detectors remote test facility 3-5 years battery lifeProduct InformationAddress card supplied with all bases. Using a coding guide pips are removed to set the address of the inserted device.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.24
1

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413The 29600-413 is a spare singular blank XPERT card in white which has been designed for use with the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.20
1

Apollo Discovery Marine Standard Mounting Base 45681-210MAR

Apollo Discovery Marine Standard Mounting Base 45681-210MAR

Apollo Discovery Marine Standard Mounting Base 45681-210MARAll detectors in the Discovery Marine range are for use with the Marine Mounting Base. The mounting base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT 7 Cards are supplied with all Discovery bases.OperationUniversal address cards known as XPERT cards are supplied with all bases. Consult the coding guide in the installation instructions to determine which pips are to be removed from the card to give the correct address. Lay the card on a flat surface pips down insert a screwdriver into the slot on the reverse of the pip to be removed and give a firm twist.When the card is coded insert it into the slot in the side of the appropriate base making sure that the card locks itself into place. As a detector is inserted into the base the remaining pips operate the address buttons on the detector and the detector electronics reads the address.Key FeaturesXPERT 7 Card addressingOne-way fitLocking feature to prevent unauthorised removal

GBP 3.84
1

Apollo Soteria XPERT 8 Intelligent Mounting Base SA5000-200APO

Apollo Soteria XPERT 8 Intelligent Mounting Base SA5000-200APO

Apollo Soteria XPERT 8 Intelligent Mounting Base SA5000-200APOAll detectors in the Soteria XP95 and Discovery range fit into the XPERT 8 Intelligent Mounting Base.The base has a wide interior diameter for ease of access to cables and terminals. The E-Z Fit feature allows you to fit the base screws place the XPERT 8 Intelligent Mounting Base over the screws slide it into place and tighten the screws.The detector requires a clockwise rotation into the base for fitting. Additionally the detector can be locked into the base for increased security by a grub-screw using a 1.5mm hexagonal driver.The XPERT 8 card part number 38532-064 supplied with the base has pre-punched pips to remove to set the address. Refer to the Coding Guide for details on how to set the address.Backwards CompatibilitySoteria detectors have been designed to operate on XP95 and Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on XP95 and Discovery bases XPERT 7 Intelligent Mounting Base. It should be noted that not all features of Soteria will be available when used with XP95 or Discovery fire control panels. If Soteria detectors are used with XP95 fire control panels incorporating drift compensation algorithms these must be disabled when communicating with Soteria devices.When Soteria detectors are used with an XPERT 7 Intelligent Mounting Base on a CoreProtocol system Soteria devices will have a 128 address offset due to only 7 address pips being available on the XPERT 7 card. For example an XPERT 7 card set at 32 will address as 160 on CoreProtocol with Soteria detectors.Key FeaturesCompatibility with Soteria XP95 and Discovery detectorsIsolated and Non-isolated devices supportedIsolated wiper - maintains loop connectivity during temporary removal of devicesXPERT 8 card for Core-ProtocolE-Z Fit allows for simple mounting of the detector base after wiringKeyed to accept only addressable devicesBase mark allows for LED detector alignmentPlease Note XPERT 8 card increase the address capacity to 254 when using Soteria detector and Core-Protocol enabled fire control panel.

GBP 2.64
1

Apollo XP95 Optical Smoke Detector 55000-600APO

Apollo XP95 Optical Smoke Detector 55000-600APO

Apollo XP95 Optical Smoke Detector - 55000-600APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.Device AddressingEach XP95 device responds to interrogation and command from central control equipment. It communicates to the panel information on status command bits type location and other information that allows an alarm to be raised even when the device is not itself being interrogated. Message error checking is also provided. The devices are compatible with Discovery systems and control equipment to aid maintenance extension and upgrade of existing systems.A unique patented XPERT card provides simple user friendly and accurate identification of detector location whereby a coded card inserted in the base is read by any detector once it is plugged in. All the electronic components are in the detector but the location information is held in the base. The address card simplifies and speeds up installation and commissioning. Addressing errors during maintenance and service are eliminated.Brand FeaturesAlarm flag for fast alarm reportingAlarm address for fast location of alarmXPERT 7 Card addressingElectronics-free baseEasy installationElegant designKey FeaturesXP95 Discovery and CoreProtocol compatibleResponds well to slowburning smouldering firesWell-suited to bedrooms and escape routesUnaffected by wind or atmospheric pressure

GBP 32.66
1

Apollo XP95 Intelligent Mounting Base 45681-210APO

Apollo XP95 Intelligent Mounting Base 45681-210APO

Apollo XP95 Mounting Base - 45681-210APOAll detectors in the Discovery range fit the IntelligentMounting Base. The Mounting Base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases.Universal address cards known as XPERT cards are supplied with all bases. Consult the coding guide in the installation instructions to determine which pips are to be removed from the card to give the correct address.Lay the card on a flat surface pips down insert a screwdriver into the slot on the reverse of the pip to be removed and give a firm twist. When the card is coded insert it into the slot in the side of the appropriate base making sure that the card locks itself into place. As a detector is inserted into the base the remaining pips operate the address buttons on the detector and the detector electronics reads the address.OperatingAn earth connection is not required for either safety or correct operation of detectors. The ground earth terminal is isolated and is provided for tidy termination of grounded conductors or cable screens and to maintain earth continuity where necessary. All terminals are marked according to their function.Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws. The slots enable two fixing screws to be located at a spacing of 51mm to 69mm. Detectors fit into bases one way only without snagging and require clockwise rotation without push force to be plugged in.Key Features XPERT AddressingOne way fit of detectorLocking feature to prevent unauthorised detector removal

GBP 2.50
1

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APOThe XPander Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor from which outputs are combined to give the final analogue value.Key Features WirelessMultisensor technology reduces false alarmsIncreased sensitivity to flaming firesXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 190.46
1

Apollo Soteria Heat Detector Isolated SA5100-400

Apollo Soteria Heat Detector Isolated SA5100-400

Apollo Soteria Heat Detector Isolated SA5100-400TheSOTERIA Heat Detector features two heat sensors located laterally to ensure good heat detection in all orientations.Backwards CompatibilitySoteria detectors have been designed to operate on XP95 and Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on XP95 and Discovery bases XPERT 7 Intelligent Mounting Base. It should be noted that not all features of Soteria will be available when used with XP95 or Discovery fire control panels.If Soteria detectors are used with XP95 fire control panels incorporating drift compensation algorithms these must be disabled when communicating with Soteria devices. When Soteria detectors are used with an XPERT 7 Intelligent Mounting Base on a CoreProtocol system Soteria devices will have a 128 address offset due to only 7 address pips being available on the XPERT 7 card. For example an XPERT 7 card set at 32 will address as 160 on CoreProtocol with Soteria detectors.Key FeaturesDual heat sensorsUtilises digital CoreProtocol communicationsCompatible with XP95 and Discovery systemsCompatible with existing fire control panelsMechanically compatible with existing basesAvailable with or without integrated switchable isolatorTri-coloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-5 standardFasTest for quicker testing of detectorsXPERT card addressing or auto addressingLocking mechanism grub screwPlease Note Not all features are available when SOTERIA devices are connected to an XP95 or Discovery fire control panel.

GBP 41.20
1

Apollo Soteria Optical Smoke Detector Isolated SA5100-600

Apollo Soteria Optical Smoke Detector Isolated SA5100-600

Apollo Soteria Optical Smoke Detector Isolated SA5100-600TheSOTERIA Optical Detector uses new optical sensing technology PureLight to detect smoke particles entering the chamber. PureLight marks a new stage in the development of Apollo optical technology and aims to reduce the possibility of false alarms and to increase the reliability of detection of a real fire.Backwards CompatibilitySoteria detectors have been designed to operate on XP95 and Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on XP95 and Discovery bases XPERT 7 Intelligent Mounting Base. It should be noted that not all features of Soteria will be available when used with XP95 or Discovery fire control panels.If Soteria detectors are used with XP95 fire control panels incorporating drift compensation algorithms these must be disabled when communicating with Soteria devices. When Soteria detectors are used with an XPERT 7 Intelligent Mounting Base on a CoreProtocol system Soteria devices will have a 128 address offset due to only 7 address pips being available on the XPERT 7 card. For example an XPERT 7 card set at 32 will address as 160 on CoreProtocol with Soteria detectors.Key FeaturesPureLight optical technology reduces false alarms and enhances smoke recognitionUtilises digital CoreProtocol communicationsCompatible with XP95 and Discovery systemsCompatible with existing fire control panelsMechanically compatible with existing basesAvailable with or without integrated switchable isolatorDrift compensationTri-coloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-7 standardFasTest for quicker testing of detectorsXPERT card addressing or auto addressingLocking mechanism grub screwPlease Note not all features are available when SOTERIAdevices are connected to an XP95 or Discovery fire control panel.

GBP 41.20
1

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700TheSOTERIA OpticalHeat Multisensor Detector uses new optical sensing technology PureLight to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat. It can be switched to detect smoke heat or a combination of both offering flexibility.Backwards CompatibilitySoteria detectors have been designed to operate on XP95 and Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on XP95 and Discovery bases XPERT 7 Intelligent Mounting Base. It should be noted that not all features of Soteria will be available when used with XP95 or Discovery fire control panels.If Soteria detectors are used with XP95 fire control panels incorporating drift compensation algorithms these must be disabled when communicating with Soteria devices. When Soteria detectors are used with an XPERT 7 Intelligent Mounting Base on a CoreProtocol system Soteria devices will have a 128 address offset due to only 7 address pips being available on the XPERT 7 card. For example an XPERT 7 card set at 32 will address as 160 on CoreProtocol with Soteria detectors.Key FeaturesDual heat sensorsPureLight optical technology reduces false alarms and enhances smoke recognitionUtilises digital CoreProtocol communicationsCompatible with XP95 and Discovery systemsCompatible with existing fire control panelsMechanically compatible with existing basesAvailable with or without integrated switchable isolatorTri-coloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-5 standardFasTest for quicker testing of detectorsXPERT card addressing or auto addressingLocking mechanism grub screwPlease Note Not all features are available when SOTERIA devices are connected to an XP95 or Discovery fire control panel.

GBP 49.36
1

Apollo Backplate 45681-233APO

Apollo Backplate 45681-233APO

Apollo Backplate 45681-233APOThe Back plate provides a high degree of protection against the ingress of water or dust into the back of the detector mounted directly onto a mounting box.When the back plate is used with either a Discovery or an XP95 device the number tab of the XPERT card must be snapped off and placed in one of the knockout slots provided in the back plate.Key Features Protects against dust and dirt ingressImproved performanceFits Discovery XP95 Orbis Series 65 and AlarmSense bases

GBP 2.70
1

Apollo SA5501-320APO Open-Area VID White Body White Flash

Apollo SA5501-320APO Open-Area VID White Body White Flash

Apollo SA5501-320APO Open-Area VID White Body WhiteFlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash

GBP 44.77
1

Apollo SA5501-321APO Open-Area VID White Body Red Flash

Apollo SA5501-321APO Open-Area VID White Body Red Flash

Apollo SA5501-321APO Open-Area VID White Body Red FlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash

GBP 44.77
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body WhiteFlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5000-202APO XPERT 8 Intelligent Mounting Base - Red

Apollo SA5000-202APO XPERT 8 Intelligent Mounting Base - Red

Apollo SA5000-202APO XPERT 8 Intelligent Mounting Base - RedAll detectors in the Soteria XP95 and Discovery range fit into the XPERT 8 Intelligent Mounting Base.The base has a wide interior diameter for ease of access to cables and terminals. The E-Z Fit feature allows you to fit the base screws place the XPERT 8 Intelligent Mounting Base over the screws slide it into place and tighten the screws.The detector requires a clockwise rotation into the base for fitting. Additionally the detector can be locked into the base for increased security by a grub-screw using a 1.5mm hexagonal driver.The XPERT 8 card part number 38532-064 supplied with the base has pre-punched pips to remove to set the address. Refer to the Coding Guide for details on how to set the address.Key FeaturesColour RedPlease note The image is for illustrative purposes only.

GBP 5.27
1

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MARDiscovery Marine analogue addressable fire detectors are suitable for larger vessels. The high specification range has been developed to meet the requirements of sophisticated systems. Discovery gives you total reassurance in installations where it is necessary to adapt detection to different operating environments and where protection against unwanted alarms is paramount.The Discovery Marine Heat Detector uses a single thermistor to sense the air temperature at the detector position. The thermistor is connected in a resistor network which produces a voltage output dependent on temperature. The design of the resistor network together with the processing algorithm in the microcontroller gives an approximately linear characteristic from 10C to 80C. This lineariser signal is further processed depending on the response mode selected and converted to an analogue output.Key FeaturesApproved for use in the marine environmentFive response modes for environmental adaptationDaynight switching for increased flexibilityDrift compensation for false alarm reductionUser programmability for dataXPERT card addressing for increased securityIdeal in environments that are dirty or smokyUnaffected by wind or atmospheric pressureRemote test feature

GBP 64.84
1

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APOThe XPander Optical Smoke Detector works on the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessPerforms well in black and white smokeBi-directional radio communicationsXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 185.70
1

Apollo Discovery Marine Multisensor Detector 58000-700MAR

Apollo Discovery Marine Multisensor Detector 58000-700MAR

Apollo Discovery Marine Multisensor Detector 58000-700MARThe Discovery Multisensor Detector construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The sectional view shows the arrangement of the optical chamber and the thermistor. The Discovery opticalheat multisensor detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector. The detectors micro-controller processes the two signals according to the mode selected.When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.Key FeaturesIdeal for a wide range of applicationsHigh immunity to false alarmsUnaffected by wind or atmospheric pressureRemote test featureRejection of transient signals

GBP 77.17
1

Apollo Discovery Marine Weatherproof Manual Call Point 58200-976MAR

Apollo Discovery Marine Weatherproof Manual Call Point 58200-976MAR

Apollo Discovery Marine Weatherproof Manual Call Point 58200-976MARThe Discovery Marine Manual Call Points has been designed for use in marine and offshore environments and are available in two versions for indoor and outdoor applications. Both versions are available with and without short circuit isolators.An alarm is initiated by pressing the resettable element. The Manual Call Point signals to the Control and Indicating Equipment using an interrupt feature within the Apollo Digital Protocol. An alarm status is indicated by a yellow and black bar in the lower section of the resettable element and a red LED. The Manual Call Point can be easily reset from the front using the supplied reset key.Discovery Marine analogue addressable fire detectors are suitable for larger vessels. The high specification range has been developed to meet the requirements of sophisticated systems. Discovery gives you total reassurance in installations where it is necessary to adapt detection to different operating environments and where protection against unwanted alarms is paramount.OperationThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. On the indoor versions the address switch is accessible without removing the call point from the mounting surface. A red alarm LED is provided on the call point. This LED is controlled independently of the call point by the control panel.This Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which fits neatly in the back of the call point. Once activated the Discovery Marine Manual Call Point can be reset by inserting the reset key into the front facing LED turning clock wise until a positive click and reset occurs.Key FeaturesApproved for use in the marine environmentFive response modes for environmental adaptationDaynight switching for increased flexibilityDrift compensation for false alarm reductionUser programmability for dataXPERT card addressing for increased security

GBP 153.76
1

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White BodyThe Intelligent Open-Area Sounder is designed for use inopen-areas and can be connected to anyCoreProtocol Discovery or XP95 system. The Intelligent Open-Area Sounder includes features such as groupand individual control status reporting and selectable tone and volume settings all configuredthrough the fire control panel.The right tone for the installationThe Intelligent Open-Area Sounder offers a choice of 15 evacuationtones including the standard Apollo evacuation tone. A tone is selected during commissioning inorder to suit local regulations or customs.Whichever evacuation tone is selected there is a secondary tonewhich may be used for alerting or warning of a possible evacuation. The right level of soundThe sounder is set during commissioning to one of sevenlevels of sound the highest level being nominally 101 dbA at 1m. At lessthan 60 dbA the lowest level falls outside the scope of the EN54 standard. Ithas been included to provide a very local warning for the use of personnel in particularenvironments such as nurse stations in hospitals.AddressingThe Open-Area Alarm Devices respond to their own individual address which is set via the appropriate XPERTaddress card. Group address and tones on CoreProtocol systems are set using the fire control panel.Location-specific volume settingDetectors and sounder indicators are installed in manydifferent types of environment. When configuring the Intelligent Open-Area Sounder devicesthe adjustment of the volume can be done at the point of installation. The commissioning engineer simply sets the control panel to Set-upand then walks from one device to the next to set the required volume using amagnetic wand. When all devices have been set the engineer simply presses abutton on the control panel which then registers all the individual volumesettings.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesAlarm switching by individual device by group address or ofall individual devices on the loopBuilt-in controllable isolatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 46.96
1