25 results (0,17975 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

5x C-TEC CAST Mini I/O Unit

5x C-TEC CAST Mini I/O Unit

LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13. Includes a switch monitor, signal relay and onboard loop isolator. 7mA typical alarm current (1mA typical quiescent current) @ 22-40V DC. Four plastic tabs for surface or panel mounting. Includes a 1A 30V DC volt-free changeover relay. Can also switch 0.3A @125V AC. Offers Switch +Ve, Ve, LED +V, Ve and changeover relay connections Future header pin offers expansion opportunities for peripheral I/O devices.

GBP 224.95
1

C-TEC ZFP 8 Way Relay PCB (full size)

C-TEC ZFP 8 Way Relay PCB (full size)

8-Way Relay PCB designed to enhance the functionality of a ZFP addressable fire panel to include 8 additional relay outputs. 8 x 1A 30V single pole contacts. Full size PCB can be scored in the middle to produce a half size 4 way relay PCB. Programmable via the ZFPs PC Tools. Polling, power and separate Relay Actibvated LED indicators. Up to 15 A-BUS Expansion PCBs can be connected to a ZFP Panel via its RS485 A-BUS network. Typically installed within the ZFP panel but can work up to 1 KM away for non-EN 54-2 functions.

GBP 359.99
1

C-TEC ZFP 16 Way Input Output PCB (full size)

C-TEC ZFP 16 Way Input Output PCB (full size)

16-Way Input Output PCB designed to enhance the functionality of a ZFP addressable fire panel. Provides 16 monitored swich inputs/open collector outputs (dependent on wiring configuration used). Full size PCB can be scored in the middle to produce a half size 8 Input Output PCB. Programmable via the ZFPs PC Tools. Polling, power and separate Input/Output Activated LED indicators. Up to 15 A-BUS Expansion PCBs can be connected to a ZFP Panel via its RS485 A-BUS network. Typically installed within the ZFP panel but can work up to 1 KM away for non-EN 54-2 functions.

GBP 339.99
1

C-TEC CFP Standard 8 Zone Conventional Fire Alarm Panel

C-TEC CFP Standard 8 Zone Conventional Fire Alarm Panel

Certified to EN54 parts 2, 4 and 13, C-TECs CFP 8zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes eightdetector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. Optional repeaters and relay expansion boards also available.

GBP 199.99
1

2x C-TEC CFP Standard 2 Zone Conventional Fire Alarm Panel

2x C-TEC CFP Standard 2 Zone Conventional Fire Alarm Panel

Certified to EN54 parts 2, 4 and 13, C-TECs CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. Optional repeaters and relay expansion boards also available.

GBP 239.98
1

2x C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel

2x C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel

Certified to EN54 parts 2, 4 and 13, C-TECs CFP 4 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. Optional repeaters and relay expansion boards also available.

GBP 279.98
1

C-TEC ZFP 8 Way Input Output PCB (full size)

C-TEC ZFP 8 Way Input Output PCB (full size)

8-Way Input Output PCB designed to enhance the functionality of a ZFP addressable fire panel. Provides 8 monitored switch inputs/open collector outputs (dependent on wiring configuration used). Full size PCB can be scored in the middle to produce a half size 8 Input Output PCB. Programmable via the ZFPs PC Tools. Polling, power and separate Input/Output Activated LED indicators. Up to 15 A-BUS Expansion PCBs can be connected to a ZFP Panel via its RS485 A-BUS network. Typically installed within the ZFP panel but can work up to 1 KM away for non-EN 54-2 functions.

GBP 249.99
1

4x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

4x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

An optional system expansion device for use with CFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels. Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote). PCB mounts inside the CFP fire panel. Reset relay is active during the panels reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Outputs are NOT designed to switch mains voltages.

GBP 239.96
1

C-TEC 10 Zone Master Call Controller c/w 300mA PSU (Flush Version)

C-TEC 10 Zone Master Call Controller c/w 300mA PSU (Flush Version)

Compatible with C-TECs entire range of 800 Series field devices. Housed in an attractive flush mounting plastic enclosure measuring just 214mm x 178mm Two call levels standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. Call Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2volt-free relay contacts which activate ona standard or emergency call. Innovative slide-in labelling system. Zones can be wired in 4 or 6 core (7/02) stranded security cable. Additional master controllers and expansion units available for use as repeaters on larger sites. Optional boxed PSUs c/wwith space for a 12V VRLA battery available for sites where a standby battery facility is required.

GBP 229.99
1

C-TEC 20 Zone Master Call Controller c/w 300mA PSU (Flush Version)

C-TEC 20 Zone Master Call Controller c/w 300mA PSU (Flush Version)

Compatible with C-TECs entire range of 800 Series field devices. Housed in an attractive flush mounting plastic enclosure measuring just 214mm x178mm Two call levels standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. Call Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2volt-free relay contacts which activate ona standard or emergency call. Innovative slide-in labelling system. Zones can be wired in 4 or 6 core (7/02) stranded security cable. Additional master controllers and expansion units available for use as repeaters on larger sites. Optional boxed PSUs c/wwith space for a 12V VRLA battery available for sites where a standby battery facility is required.

GBP 309.99
1

C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel

C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel

LPCB certified to EN54-2/4, C-TECs CFP two-wire 8zone AlarmSensefire panelis designed to work with Apollos AlarmSenserange of detectors, call points, sounders and visual indicators. Most conventional fire systems work with two pairs of wires per zone: one pair for detection devices; the other for alarm devices. By using different voltage bands for quiescent and alarm states, AlarmSense components can be connected to the same pair of supply wires. This reliable technology takes all of the complexity out of fire system design, leading to quicker, more flexible installationand around a 20-25% reduction of labour over a standard four wire system. The CFP708-2includes fourAlarmSensezones, four conventional sounder circuits, class change &alert inputsandon-board fire &fault relays. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Optional repeaters and relay expansion boards also available.

GBP 249.99
1

3x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote & 8 Output Per Zone Relays)

3x C-TEC CFP Relay Output Card (Reset, Fault, Aux. & Remote & 8 Output Per Zone Relays)

An optional system expansion device for use with CFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels. Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote) and eight output per zone relays. PCB mounts inside the CFP fire panel. Reset relay is active during the panels reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Output per zone relays will changeover when the corresponding zone is in alarm (subject to certain conditions for full details refer to the instructions, downloadable below). Outputs are NOT designed to switch mains voltages.

GBP 239.97
1

C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

LPCB certified to EN54-2/4, C-TECs CFP two-wire 4zone AlarmSensefire panelis designed to work with Apollos AlarmSenserange of detectors, call points, sounders and visual indicators. Most conventional fire systems work with two pairs of wires per zone: one pair for detection devices; the other for alarm devices. By using different voltage bands for quiescent and alarm states, AlarmSense components can be connected to the same pair of supply wires. This reliable technology takes all of the complexity out of fire system design, leading to quicker, more flexible installationand around a 20-25% reduction of labour over a standard four wire system. The CFP704-2includes fourAlarmSensezones, four conventional sounder circuits, class change &alert inputsandon-board fire &fault relays. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Optional repeaters and relay expansion boards also available.

GBP 199.99
1

C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

LPCB certified to EN54-2/4, C-TECs CFP two-wire 2 zone AlarmSensefire panelis designed to work with Apollos AlarmSenserange of detectors, call points, sounders and visual indicators. Most conventional fire systems work with two pairs of wires per zone: one pair for detection devices; the other for alarm devices. By using different voltage bands for quiescent and alarm states, AlarmSense components can be connected to the same pair of supply wires. This reliable technology takes all of the complexity out of fire system design, leading to quicker, more flexible installationand around a 20-25% reduction of labour over a standard four wire system. The CFP702-2includes two AlarmSensezones, four conventional sounder circuits, class change &alert inputsandon-board fire &fault relays. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Optional repeaters and relay expansion boards also available.

GBP 169.99
1

C-TEC 10 Zone Master Call Controller c/w 300mA PSU (Surface Version)

C-TEC 10 Zone Master Call Controller c/w 300mA PSU (Surface Version)

Compatible with C-TECs entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm Two call levels standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. Call Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call. Innovative slide-in labelling system. Zones can be wired in 4 or 6 core (7/02) stranded security cable. Additional master controllers and expansion units available for use as repeaters on larger sites. Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required.

GBP 249.99
1

C-TEC 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)

C-TEC 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)

Compatible with C-TECs entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm Two call levels standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. Call Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call. Innovative slide-in labelling system. Zones can be wired in 4 or 6 core (7/02) stranded security cable. Additional master controllers and expansion units available for use as repeaters on larger sites. Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required.

GBP 339.99
1