12 results (0,14016 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Red Lens IS-SB-02-02

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Red Lens IS-SB-02-02

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Red Lens IS-SB-02-02This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 212.14
1

C-Tec Moflash EX Intrinsically Safe Beacon with Red Lens IS-B-02-02

C-Tec Moflash EX Intrinsically Safe Beacon with Red Lens IS-B-02-02

C-Tec Moflash EX Intrinsically Safe Beacon with Red Lens IS-B-02-02This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 164.82
1

C-Tec Moflash EX Intrinsically Safe Beacon with Blue Lens IS-B-02-03

C-Tec Moflash EX Intrinsically Safe Beacon with Blue Lens IS-B-02-03

C-Tec Moflash EX Intrinsically Safe Beacon with Blue Lens IS-B-02-03This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 172.67
1

C-Tec Moflash EX Intrinsically Safe Beacon with White Lens IS-B-02-05

C-Tec Moflash EX Intrinsically Safe Beacon with White Lens IS-B-02-05

C-Tec Moflash EX Intrinsically Safe Beacon with White Lens IS-B-02-05This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 172.67
1

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Amber Lens IS-SB-02-01

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Amber Lens IS-SB-02-01

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Amber Lens IS-SB-02-01This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 212.14
1

C-Tec Moflash EX Intrinsically Safe Beacon with Green Lens IS-B-02-04

C-Tec Moflash EX Intrinsically Safe Beacon with Green Lens IS-B-02-04

C-Tec Moflash EX Intrinsically Safe Beacon with Green Lens IS-B-02-04This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 172.67
1

C-Tec Moflash EX Intrinsically Safe Beacon with Amber Lens IS-B-02-01

C-Tec Moflash EX Intrinsically Safe Beacon with Amber Lens IS-B-02-01

C-Tec Moflash EX Intrinsically Safe Beacon with Amber Lens IS-B-02-01This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 164.82
1

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with White Lens IS-SB-02-05

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with White Lens IS-SB-02-05

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with White Lens IS-SB-02-05This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof WeatherproofPlease note The blue green and white versions are all fitted with clear lenses and it is the internal LEDs which then give the colour when operated.

GBP 222.01
1

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Green Lens IS-SB-02-04

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Green Lens IS-SB-02-04

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Green Lens IS-SB-02-04This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof WeatherproofPlease note The blue green and white versions are all fitted with clear lenses and it is the internal LEDs which then give the colour when operated.

GBP 222.01
1

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Blue Lens IS-SB-02-03

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Blue Lens IS-SB-02-03

C-Tec Moflash EX Intrinsically Safe Sounder Beacon with Blue Lens IS-SB-02-03This LED Beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly on signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The beacon head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I Ma fGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T850 C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof WeatherproofPlease note The blue green and white versions are all fitted with clear lenses and it is the internal LEDs which then give the colour when operated.

GBP 222.01
1

C-Tec Moflash EX Red Intrinsically Safe Sounder IS-S-02

C-Tec Moflash EX Red Intrinsically Safe Sounder IS-S-02

C-Tec Moflash EX Red Intrinsically Safe Sounder IS-S-02The IS electronic sounder has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.This range is suitable for Fire Security Process Control and general signalling applications. The sounder unit incorporates a Two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit. Connections are made to the base during the initial wiring phase which results in a faster more reliable installation.The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections. Further details can be found on the installation sheet This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator.Key FeaturesZones 0 1 2 20 21 and 22 ATEX and IECEx approvedIP66 ratedSurface MountPolycarbonate housing material

GBP 151.30
1