14 results (0,12841 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Carrier ATS1197 Smart Card Reader With Keypad Supplied With 2m Cable

Carrier ATS1197 Smart Card Reader With Keypad Supplied With 2m Cable

Carrier ATS1197 Smart Card Reader With Keypad Supplied With 2m CableThe ATS smart card readers connect directly on the RS485 data bus of the control panel or 4 Door Controller and may be configured and addressed via a LCD keypad. Some security options Site code 4-byte security code are only programmable via TITAN and configuration cards. Mainly used for outdoor applications in high security sites where needs to be used a combination of a card and PIN for access.Security FeaturesThe ATS smart card technology has the ability to programme a unique 4 billion 4-byte combination security code. This allows the memory card to unlockopendisarm based on three keys the card number the Site code and the 4-byte security code. Once a 4-byte security code has been created downloaded to the programmer and the cards it is not possible to read the memory on the card or even recognise the card memory at any other reader or TITAN and programmer combination. Communications between TITAN and the programmer may also be password protected to prevent the 4-byte security code from being uploaded from the programmer into another PC running TITAN.Key FeaturesFull epoxy filled weather proof constructionKeypadSpecified cable - Aritech WCAT 5254 or equivalentCompatible with Axon and Advisor Advanced panels

GBP 269.50
1

Carrier IU987-25PK XPERT Card Non-Addressed Apollo equivalent 38531-771 Pack of 25

Carrier IU987-25PK XPERT Card Non-Addressed Apollo equivalent 38531-771 Pack of 25

Carrier IU987-25PK XPERT Card Non-Addressed Apollo equivalent 38531-771 Pack of 25The IU987 is a replacement un-addressed address card for use in 900 bases for 900 series detectors. This card provides a unique patented addressing method with simple user friendly and accurate identification of a detectors location.The IU987 a plastic coded card containing seven pips. The address is set by simply removing the pips with a screwdriver according to a chart supplied with the bases. The coded card is then inserted into the side of the base where it locks into position. When the detector head is rotated into the base the remaining pips on the card operate the address buttons on the base of the detector and the address is read by the detector electronics.Addressing in this manner simplifies and speeds up installation and commissioning and can be used on Series 930 950 970 and 990 device ranges.Address information is held in the detector base not the detector head. This means that the address remains in the same location regardless of how many times the detector head is replaced for example during servicing or maintenance. It also allows for different types of detecting heads to be interchanged to meet changes in building use without changing the address location.Key FeaturesPack of 25Easy addressing

GBP 17.42
1

Aritech ATS1115-N ATS 16 Area Keypad 2 Line 16 Character LCD Display With Built-in Card Reader

Aritech ATS1115-N ATS 16 Area Keypad 2 Line 16 Character LCD Display With Built-in Card Reader

Aritech ATS1115-N ATS 16 Area Keypad 2 Line 16 Character LCD Display With Built-in Card ReaderThe ATS 1115 is part of the Remote Arming Station family for the advisor MASTER security system. The RAS family consists of a range of keypads and card readers which can be used in different environments in and out-door. The ATS1115 can be used for configuration and management of the system as well as for opening doors and armingdisarming areas. In an easy way the ATS1115 gives a status overview from your security system with both visual and audio indicators.Product overviewThe ATS1115 is a modern ergonomic design and has a clearly readable text on a 2 x 16 characters LCD for displaying system programming alarm and access control functions. The viewing angle of the display is adjustable via the keypad as well as the volume level of the built-in buzzer. Four arrow keys will navigate the user easily through the programming and operational features and 6 additional functions key will complete this user-friendly interface.Built-in card readerThe ATS1115 has a built in smart card reader. The ATS1115 can be used for armingdisarming using either the PIN or the card or a combination of the two for higher security needs. It is suitable for using the multiple card badging techniques which are available for the advisor MASTER control panel family. A user could arm the system in the evenings by badging his card three times within 10 seconds interval. Another application could be for doors which can be programmed so that badging once unlocks badging twice with the same card keeps the door unlocked to allow people in and out without card and badging three times re-locks the door.IndicationsFour status LEDs will continuously update the user on mains condition faults access control and alarms.Green Power Yellow Fault Blue Access and Red Alarm are controlled by the control panel.The Arming Station can display the status of 16 areas using 16 LEDs on the front while the LCD shows details of alarms or a pre-programmed text.The area may be identified by viewing the 16 area LEDs visible when the RAS cover is open or removed and the indicates area is armed on area in fault slow flash and area alarm fast flashKey Features2 x 16 characters LCDUser adjustable buzzerUser adjustable LCD contrast16 Area indicationDoor release indicationBuilt-in smart card proximity reader

GBP 206.32
1

Carrier P-9930 RS232 Comms Board for GST200 amp GST200-2

Carrier P-9930 RS232 Comms Board for GST200 amp GST200-2

Carrier P-9930 RS232 Comms Board for GST200 GST200-2The P-9930 RS232 card is an optional card for GST200 series control panels providing two photoelectric isolation RS232 interfaces for connecting with GST Graphic Monitor Centre and GST Defining Tool.This card shouldnt be inserted and removed when it is energized.When entering calibration mode pressing SK1 key reset main board it will display Colour CRT OK if registration is successful.Key FeaturesStandard RS232 and USB interfacesConnecting GST Graphic Centre and GST Defining Tool

GBP 98.21
1

SmartCell SC-61-0002-0001-99 SmartCell Internal Communications Module V2 2G3G4G

SmartCell SC-61-0002-0001-99 SmartCell Internal Communications Module V2 2G3G4G

SmartCell SC-61-0002-0001-99 SmartCell Internal Communications Module V2 2G3G4GThe SmartCell SC-61-0002-0001-99 is an internal communication card which provides a remote connection option for the SmartCell fire system to send SMSemail updates out for different system events. The module is designed for internal connection within the SmartCell fire control panel. Transmission is provided by Ethernet and GSMGPRS cellular 2G 3G 4G.Please Note Requires SC-94-0001-99 SmartCell remote services annual contract for operation after 1 year.Key FeaturesProvides remote connection option for SMSemail updatesFor internal connection within the SmartCell control panelIncludes GSM antenna and SIM card supporting 2G 3G 4G connectivityRequires SC-94 SmartCell remote services annual contract after 1 year

GBP 247.08
1

Carrier GST-NRP00 Network Repeater Panel with Full Function Control for GST200N Series

Carrier GST-NRP00 Network Repeater Panel with Full Function Control for GST200N Series

Carrier GST-NRP00 Network Repeater Panel with Full Function Control for GST200N SeriesThe GST-NRP00 Network Repeater Panel is based on GST network technology providing remote control and indication of the fire alarm system.A certain network card is required for sitting to the network.1.0mm2 or above fire cable is recommended for communication cable and 1.5mm2 or above fire cable is recommended for power supply. All cables should be subject to local codes.Key FeaturesProvide remote display and control of systemPassword protected access level8X18 characters LCD screen15 LEDs to display important informationFunctional control of network panelsNetwork-wide operation Acknowledge Silence Reset.Flush-mount or surface-mount structureMeet network protocol by selecting suitable network card

GBP 466.38
1

Carrier TVD-CB2 TruVision Dome 2 Inch Cup Base For IP 365 Wedge

Carrier TVD-CB2 TruVision Dome 2 Inch Cup Base For IP 365 Wedge

Carrier TVD-CB2 TruVision Dome 2 Inch Cup Base For IP 365 WedgeTruVision IP Megapixel Wedge IR Cameras by Interlogix bring high-definition images to the mass video surveillance market. With 2MPx or 4MPx resolution options these cameras provide flexibility for a wide variety of applications.The IP Megapixel Wedge IR Cameras also adhere to ONVIF Profile G and S open communications standards as well as support CGI command set for simple integration into standard IP systems. By utilizing an integrated browser and micro SD memory card storage capability these cameras simplify remote live monitoringplayback of edge-recorded audio and video. Memory card recording also protects data in the event of network disruptions.

GBP 18.31
1

SmartCell SC-11-2201-0001-99 Wireless Control Panel 24V

SmartCell SC-11-2201-0001-99 Wireless Control Panel 24V

SmartCell SC-11-2201-0001-99 Wireless Control Panel 24VSmartCell has been designed as a complete wireless fire detection system to protect people and property. The system incorporates separate information zones which allow input devices to be configured in multiple configurations providing maximum flexibility to the user and designer.A SmartCell system can support up to 64 wireless devices consisting of 32 fire devices and 32 information devices.Communication between devices and the control panel is bidirectional and operates in the European harmonised 868MHz frequency band.With significant time saving against conventional and addressable fire system installations no cables no mess and no inconvenience to everyday business SmartCell is perfect for all small to medium sized fire system installations.Key FeaturesFully wirelessQuick and easy to installCompact enclosure80 character OLED displayAccommodates internal communications card for SmartCell Services connection230 VAC version also available

GBP 418.67
1

SmartCell SC-11-1201-0001-99 Wireless Control Panel 230VAC

SmartCell SC-11-1201-0001-99 Wireless Control Panel 230VAC

SmartCell SC-11-1201-0001-99 Wireless Control PanelSmartCell has been designed as a complete wireless fire detection system to protect people and property. The system incorporates separate information zones which allow input devices to be configured in multiple configurations providing maximum flexibility to the user and designer.A SmartCell system can support up to 64 wireless devices consisting of 32 fire devices and 32 information devices.Communication between devices and the control panel is bidirectional and operates in the European harmonised 868MHz frequency band.With significant time saving against conventional and addressable fire system installations no cables no mess and no inconvenience to everyday business SmartCell is perfect for all small to medium sized fire system installations.Key FeaturesFully wirelessQuick and easy to installCompact enclosure80 character OLED displayAccommodates internal communications card for SmartCell Services connection24 VDC version also available

GBP 472.43
1

Carrier TVLP-S01-0401-BUL-G Truvision ANPR IP Camera 4mp 2.8-12mm 50m Ir Wiegand Ip67 Ik10

Carrier TVLP-S01-0401-BUL-G Truvision ANPR IP Camera 4mp 2.8-12mm 50m Ir Wiegand Ip67 Ik10

Carrier TVLP-S01-0401-BUL-G Truvision ANPR IP Camera 4mp 2.8-12mm 50m Ir Wiegand Ip67 Ik10The new range of ANPR cameras complete our TruVision line with solutions that help you facilitate management of vehicles. The S series ANPR cameras allow you to monitor or manage vehicle access on a site. The cameras can either monitor and capture vehicles entering your premises or manage parking access for vehicles based on their license plate.In standalone operation where the camera is used to grant access to vehicles the license plates stored in the camera database can be defined as allowed or blocked vehicles. Actions like activating a camera output to open a gate for allowed vehicles can be configured in the camera. Blocked or non-listed vehicles can also trigger additional actions or events if needed.Without matching vehicle license plates against a database the camera is also able store any captured license plate on local storage NAS or FTP server.Key FeaturesMaximum resolution 2680 1520ANPR Automatic Number Plate RecognitionBlock and allow list license plate database up to 10000 recordsWiegand output for integration with Access Control systemsMotorized zoom lens 2.8 to 12 mm with auto-focusUp to 50 m IR illumination5 independent configurable video streamsEdge recording up to 256 GB with optional SD card

GBP 818.76
1

Carrier CDC4-EN 4-8 Door Controller For Advisor Advanced - EN Approved

Carrier CDC4-EN 4-8 Door Controller For Advisor Advanced - EN Approved

Carrier CDC4-EN 4-8 Door Controller For Advisor Advanced - EN ApprovedThe CDC4-EN is a 4-8 door lift controller. It provides for a complete and versatile access control solution to extend the Advisor Advanced and Axon system with advanced access control functions. It provides a complete integrated real-time alarm and access control system for four up to eight doors or lifts with power supply and housing. A total of 12 doorlift controllers can be connected to an Advisor Advanced or Axon panel providing for a total of 48 up to 96 full access doors. The CDC4-EN doorlift controller can operate off-line with no degradation in performances should communication with the Advisor Advanced panel fail as it offers full offline operation. This combined intrusion and access solution reduces wiring and required devices as the same devices like readers and inputs can be used for both purposes. Being EN50131 and NFa2p approved the inputs and power supply for door contacts and detectors can be used as part of an approved intrusion system.Door and lift control can be used in one single door controller by configuring doors to lifts. The CDC4-EN provides for the same size and connector arrangement as the ATS1250 including 4 Wiegand interfaces. This provides the most cost effective and easiest method to upgrade an older ATS1250 in an Advisor Advanced system or when upgrading ATS Master with ATS1250s to a current system where the ATS Master is replaced by Advisor Advanced or Axon panel.Key FeaturesReal-time alarm access control on 4-8 doors lifts per controllerApproved for EN50131-3 and EN50131-6 NFa2p for use in intrusion systemsComplete database for offline operationUp to 12 CDC4-EN door controllers providing 48 to 96 intelligent doors or liftsCompatible with Axon and Advisor Advanced panelsAny door can be configured as lift use both together in one controllerFull access control features interlocking user count high secure users anti-passback with regionsUp to 65532 users with card andor PINUp to 32 readers per CDC4-EN and 6 per doorTwo local databuses with configurable protocolSupporting Secure readers OSDP readers and wireless locksOn board inputs 4 Wiegand interfaces door relays IP connection and expansion optionsExtended mode operation access control users managed by Advisor ManagementAnti-passback between all door controllers in standard mode connected to Advisor Advanced or Axon

GBP 1269.68
1