8 results (0,13361 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Dunlop BTL SPZ050/2 Pilot Bore 2- Groove Pulley

Dunlop BTL SPZ050/2 Pilot Bore 2- Groove Pulley

Dunlop V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. V-Pulleys are available to suit all wedge belts with a cross section SPZ (9.7mm) Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3 IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 8.49
1

Dunlop BTL SPZ060/1 Pilot Bore 1- Groove Pulley

Dunlop BTL SPZ060/1 Pilot Bore 1- Groove Pulley

Dunlop V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. V-Pulleys are available to suit all wedge belts with a cross section SPZ (9.7mm) Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3 IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 7.39
1

Dunlop BTL SPZ056/1 Pilot Bore 1- Groove Pulley

Dunlop BTL SPZ056/1 Pilot Bore 1- Groove Pulley

Dunlop V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. V-Pulleys are available to suit all wedge belts with a cross section SPZ (9.7mm) Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3 IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 7.99
1

Dunlop BTL SPZ050/1 Pilot Bore 1- Groove Pulley

Dunlop BTL SPZ050/1 Pilot Bore 1- Groove Pulley

Dunlop V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. V-Pulleys are available to suit all wedge belts with a cross section SPZ (9.7mm) Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3 IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 6.99
1

Dunlop BTL SPA067/1 Taper Bore 1-Groove Pulley 1108

Dunlop BTL SPA067/1 Taper Bore 1-Groove Pulley 1108

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 7.99
1

Dunlop BTL SPA067/2 Taper Bore 2-Groove Pulley 1108

Dunlop BTL SPA067/2 Taper Bore 2-Groove Pulley 1108

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphated according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 8.49
1

Dunlop BTL SPZ050/1 Taper Bore 1-Groove Pulley 1008

Dunlop BTL SPZ050/1 Taper Bore 1-Groove Pulley 1008

Dunlop SPZ V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPZ (9.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPZ) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPZ250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 8.19
1

Dunlop BTL SPA063/1 Taper Bore 1-Groove Pulley 1008

Dunlop BTL SPA063/1 Taper Bore 1-Groove Pulley 1008

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 7.99
1