KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Hochiki Multi-Heat Sensor - Black case - ATJ-ENBLK

Hochiki Multi-Heat Sensor - Black case - ATJ-ENBLKThe ATJ-EN incorporates a variable temperature heat element and a rate of rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision 1.The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing 1Check control panel compatibility

GBP 45.19

1

Hochiki Multi Heat Sensor White ATJ-ENWHT

Hochiki ATJ-ENWHT Multi Heat Sensor WhiteThe ATJ-ENWHT incorporates a variable temperature heat element and a rate of rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 degree viewing - green when polling turn red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB VdS approved to Classes A B CSIL Level 2 approved variants available

GBP 31.62

1

Hochiki Multi Sensor Detector Heat and Smoke White ACC-ENWHT

Hochiki ACC-ENWHT Multi Sensor Detector Heat and Smoke WhiteThe ACC-ENWHT has 3 modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-E smoke chamber can esily be removed or replaced for easy maintentance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing - green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB VdS approved to Classes A1 CSIL Level 2 approved variants available

GBP 38.04

1

Hochiki Marine Multi Heat Sensor ATJ-ENM

Hochiki ATJ-ENM Marine Multi Heat SensorModel ATJ-ENM is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ATJ-ENM incorporates a Variable Temperature heat element and a Rate Of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 degree viewing green when polling turning red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants available

GBP 42.62

1

Hochiki Marine Multi Heat Sensor White ATJ-ENMWHT

Hochiki ATJ-ENMWHT Marine Multi Heat Sensor WhiteModel ATJ-ENMWHT is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ATJ-ENMWHT incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 degree viewing green when polling turn red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants availableAvailable in ivory

GBP 42.62

1

Hochiki Multi-Sensor PhotoelectricHeat - Black case - ACC-ENBLK

Hochiki Multi-Sensor PhotoelectricHeat - Black case - ACC-ENBLKModel ACC-ENBLK is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High-Performance photoelectric smoke chamber. The ACC-ENBLK has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENBLK smoke chamber can easily be removed or replaced for easy maintenance.Key Features User selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 3600 viewing green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedSIL Level 2 approved variants availableAlso available in white and ivoryControl Panel compatibility required

GBP 49.44

1

Hochiki Marine Multi-Sensor Photoelectric and Heat White ACC-ENMWHT

Hochiki ACC-ENMWHT Marine Multi-Sensor Photoelectric and Heat WhiteModel ACC-ENMWHT is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High-Performance photoelectric smoke chamber.The ACC-ENMWHT has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENMWHT smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLAvailable in ivory

GBP 48.37

1

Hochiki Marine Multi-Sensor Photoelectric and Heat ACC-ENM

Hochiki ACC-ENM Marine Multi-Sensor Photoelectric and HeatModel ACC-ENM is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High Performance photoelectric smoke chamber.The ACC-ENM has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENM smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turning red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants available

GBP 48.37

1

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCI

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCIThe ATJ-ENSCI is a Multi-Heat Sensor with SCI which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ATJ-ENSCI incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 viewing green when polling amber when isolating red in firePulsingnon-pulsing controlled from panelElectronically AddressedOperating Voltage 17 41 VDCAlarm Current controlled by CIE 9.1 mA excluding remote indicatorCurrent in Short Circuit 13.5mATransmission Method Digital Communications Using ESPOperating Temperature Range -10 C to 50 CCompatible Bases YBV-R4

GBP 43.58

1

Hochiki Waterproof Combined Heat Sensor ACB-EW

Hochiki ACB-EW WaterproofMulti-Heat SensorACB-EW is a Waterproof Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ACB-EW incorporates a variable Fixed Temperature heat element and a Rate Of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Rated to IP67 the ACB-EW can be used externally and is supplied with its own fixing base which is used to fix the sensor. Flying leads from the sensor connect directly to the loop via waterproof connectors.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate Of Rise Heat elementsTwin fire LEDs allow 360 viewingPulsingnon-pulsing controlled from panelElectronically AddressedIP Rated to IP67

GBP 73.51

1

Hochiki Multi Heat Sensor Ivory ATJ-EN

Hochiki ATJ-EN Multi Heat Sensor IvoryThe ATJ-EN is a direct replacement of the ACB-E and will share the same bases. Model ATJ-EN is a Multi-Heat Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ATJ-EN incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate Of Rise Heat elementsTwin LEDs allow 360 viewing green when polling turn red in firePulsingnon-pulsing controlled from panelElectronically addressedLPCB VdS approved to Classes A1 B CSIL Level 2 approved variants availableAvailable in whiteImprovementsNew Outer Cover Design featuring indicative sensor type markingsSoftware AdvancesIncreased Noise ImmunityFully backwards compatible

GBP 31.62

1

Hochiki Multi Sensor Detector Heat and Smoke Ivory ACC-EN

Hochiki ACC-EN Multi Sensor Detector Heat and Smoke IvoryThe ACC-EN is a direct replacement of the ACA-E and will share the same bases. Model ACC-EN is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High Performance photoelectric smoke chamber.The ACC-EN has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-EN smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 viewing green when polling turn red in fire Pulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB VdS approved to classes A1 CSIL Level 2 approved variants availableAvailable in whiteImprovementsEnhanced Performance ChamberNew Outer Cover Design featuring indicative sensor type markingsSoftware AdvancedIncrease Noise ImmunityFully backwards compatible

GBP 38.04

1

Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RL

Hochiki Base Sounder Beacon Ivory Case Red LEDs YBO-BSB2RLModel YBO-BSB2RL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Base YBN-R3SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in white or black

GBP 66.20

1

Hochiki Base Sounder Beacon White Case Red LEDs YBO-BSB2WHTRL

Hochiki Base Sounder Beacon White Case Red LEDs YBO-BSB2WHTRLModel YBO-BSB2WHTRL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3WHT or the Isolator Base YBN-R3WHT-SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2WHT. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in ivory or black

GBP 66.20

1

Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WL

Hochiki Base Sounder Beacon Ivory Case White LEDs YBO-BSB2WLModel YBO-BSB2WL is an O Rated EN54-23 compliantaddressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Base YBN-R3SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in white and black

GBP 54.84

1

Hochiki Base Sounder Beacon White Case White LEDs YBO-BSB2WHTWL

Hochiki Base Sounder Beacon White Case White LEDs YBO-BSB2WHTWLModel YBO-BSB2WHTWL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption. The unit is designed to fit to the Standard Base YBN-R3 or the Isolator Bases YBO-RSCI or YBN-R3SCI and can be fitted with any of the ESP Range of Sensors Beacons or Remote Indicators.The unit can also be converted into a wall sounder beacon with the simple addition of a Cap SICAP2WHT. The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate before automatically shutting down cutting noise pollution in the case of the sounder element. Sounder and Beacon elements can be operated independently from each other.Key FeaturesEN54-23 compliantO RatedSingle Loop Address - addressed via the TCH-B100 Hand Held ProgrammerVariable Sound Output 50 98 dBA 2 dBA output at 1 metreSounder and Beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki Standard or Isolator Base and supports ESP Sensors Addressable Beacons and Addressable Remote Indicator51 User-Selectable Tones all tones EN54-3 compatibleAuto-Shutdown feature prevents noise-pollutionAlso available in ivory or black