251 results (0,17149 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

10x Iscar LNAR 1506PN-N-P Insert Grade IC07

10x Iscar LNAR 1506PN-N-P Insert Grade IC07

LNAR Milling Inserts Tangentially clamped inserts with positive polished land and a sharp cutting edge. Recommended for machining high silicon aluminum. 4 R.H. and 4 L.H. cutting edges when used on F90LN.. cutters. Insert Grade: IC07 ISO Range - P/M/K: (M10-M20) ISO Range - H/S/N: (S10-S30)(N05-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated An uncoated, fine grain, carbide grade. Used for high temperature alloys at low to medium cutting speed.

GBP 659.90
1

10x Iscar GIPA-3.00-0.20 Insert Grade IC20

10x Iscar GIPA-3.00-0.20 Insert Grade IC20

GIPA (W=3-6) : Precision ground double-ended inserts, polished to avoid built-up edge, used for machining aluminum at medium-to-high feeds. IC20 (K10-K20). Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

GBP 1899.90
1

10x Iscar Grip 4020Y Insert Grade I C908

10x Iscar Grip 4020Y Insert Grade I C908

GRIP (full radius) : Full radius, double-ended inserts, for turning and grooving in external, internal and face applications. For External, Internal & Face Machining Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3

GBP 849.90
1

10x Iscar GIP-3.00E-0.20 Insert Grade IC908

10x Iscar GIP-3.00E-0.20 Insert Grade IC908

GIP-E : Precision, double-ended inserts for turning and grooving. P-type chipformer, medium-to-high feeds. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC808 Recommended for a very wide range of materials. ISO Range - P/M/K (P15-P30)(M20-M30) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN/AlTiN+TiN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC830 High toughness and wear resistance. ISO Range - P/M/K (P20-P40)(M25-M35) ISO Range - H/S/N (S15-S30) Grade or Coating Type PVD Coating Layers AlTiN+TiN Grade : IC8250 High toughness and wear resistance. ISO Range - P/M/K (P10-P35)(M05-M20) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+Al2O3+TiN Grade : IC635 For low speed, high feed and unfavorable conditions. ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN

GBP 849.90
1

10x Iscar GIP 3.00E-1.50 Insert Grade IC908

10x Iscar GIP 3.00E-1.50 Insert Grade IC908

GIP-E : Precision, double-ended inserts for turning and grooving. P-type chipformer, medium-to-high feeds. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC808 Recommended for a very wide range of materials. ISO Range - P/M/K (P15-P30)(M20-M30) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN/AlTiN+TiN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC830 High toughness and wear resistance. ISO Range - P/M/K (P20-P40)(M25-M35) ISO Range - H/S/N (S15-S30) Grade or Coating Type PVD Coating Layers AlTiN+TiN Grade : IC8250 High toughness and wear resistance. ISO Range - P/M/K (P10-P35)(M05-M20) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+Al2O3+TiN Grade : IC635 For low speed, high feed and unfavorable conditions. ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN

GBP 899.90
1

10x Iscar GIP-3.00E-1.50 Insert Grade IC20

10x Iscar GIP-3.00E-1.50 Insert Grade IC20

GIP-E : Precision, double-ended inserts for turning and grooving. P-type chipformer, medium-to-high feeds. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC808 Recommended for a very wide range of materials. ISO Range - P/M/K (P15-P30)(M20-M30) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN/AlTiN+TiN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC830 High toughness and wear resistance. ISO Range - P/M/K (P20-P40)(M25-M35) ISO Range - H/S/N (S15-S30) Grade or Coating Type PVD Coating Layers AlTiN+TiN Grade : IC8250 High toughness and wear resistance. ISO Range - P/M/K (P10-P35)(M05-M20) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+Al2O3+TiN Grade : IC635 For low speed, high feed and unfavorable conditions. ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN

GBP 719.90
1

10x Iscar GIP-5.00E-2.50 Insert Grade IC8250

10x Iscar GIP-5.00E-2.50 Insert Grade IC8250

GIP-E : Precision, double-ended inserts for turning and grooving. P-type chipformer, medium-to-high feeds. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC808 Recommended for a very wide range of materials. ISO Range - P/M/K (P15-P30)(M20-M30) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN/AlTiN+TiN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC830 High toughness and wear resistance. ISO Range - P/M/K (P20-P40)(M25-M35) ISO Range - H/S/N (S15-S30) Grade or Coating Type PVD Coating Layers AlTiN+TiN Grade : IC8250 High toughness and wear resistance. ISO Range - P/M/K (P10-P35)(M05-M20) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+Al2O3+TiN Grade : IC635 For low speed, high feed and unfavorable conditions. ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN

GBP 1099.90
1

10x Iscar Grip 5005Y Insert Grade I C354

10x Iscar Grip 5005Y Insert Grade I C354

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 1229.90
1

10x Iscar Grip 5008Y Insert Grade I C8250

10x Iscar Grip 5008Y Insert Grade I C8250

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 999.90
1

10x Iscar GIPI 3.00E-0.40 Insert Grade IC830

10x Iscar GIPI 3.00E-0.40 Insert Grade IC830

GIPI: Double-ended precision inserts with P-type chipformer for internal grooving and recessing at medium feeds. Grade : IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC328 A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade : IC9054 A CVD multilayer TiCN / Al2O3 / TiN coated grade. A tough grade, used for and grooving and turnig carbon, alloyed and stainless steel, at medium to high cutting speed. ISO Range - P/M/K: (P15-P40)(M10-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC656 A CVD coated grade used for semiroughing and medium machining at medium speed and high to medium feed of carbon, tool and stainless steel. ISO Range - P/M/K: (P20-P40)(M20-M40) Grade or Coating Type: CVD Coating Layers: TiCN+TiC+TiN

GBP 829.90
1

10x Iscar GIPI-3.96-0.20 Insert Grade IC8250

10x Iscar GIPI-3.96-0.20 Insert Grade IC8250

GIPI: Double-ended precision inserts with P-type chipformer for internal grooving and recessing at medium feeds. Grade : IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC328 A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade : IC9054 A CVD multilayer TiCN / Al2O3 / TiN coated grade. A tough grade, used for and grooving and turnig carbon, alloyed and stainless steel, at medium to high cutting speed. ISO Range - P/M/K: (P15-P40)(M10-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC656 A CVD coated grade used for semiroughing and medium machining at medium speed and high to medium feed of carbon, tool and stainless steel. ISO Range - P/M/K: (P20-P40)(M20-M40) Grade or Coating Type: CVD Coating Layers: TiCN+TiC+TiN

GBP 1549.90
1

10x Iscar HSM90S APCR 140550R-P Insert Grade IC28

10x Iscar HSM90S APCR 140550R-P Insert Grade IC28

HSM90S APCR Milling Inserts HELIALU super positive and polished rake inserts, for machining aluminum at high rotation speed. The insert features a groove on its bottom, designed to improve resistance to centrifugal force. Insert Grade: IC28 ISO Range - P/M/K: (M30-M40) ISO Range - H/S/N: (N15-N30) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Used mainly for machning aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.

GBP 1499.90
1

10x Iscar HSM90S APCR 140520R-P Insert Grade IC28

10x Iscar HSM90S APCR 140520R-P Insert Grade IC28

HSM90S APCR Milling Inserts HELIALU super positive and polished rake inserts, for machining aluminum at high rotation speed. The insert features a groove on its bottom, designed to improve resistance to centrifugal force. Insert Grade: IC28 ISO Range - P/M/K: (M30-M40) ISO Range - H/S/N: (N15-N30) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Used mainly for machning aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.

GBP 899.90
1

10x Iscar CCMT 09T308-14 Insert Grade IC9250

10x Iscar CCMT 09T308-14 Insert Grade IC9250

IC30N Grade description: (P05 - P25). Cermet grade for carbon steel, tool steel, alloy steel, steel casting, malleable cast iron, austenitic stainless steel, martensitic stainless steel, free cutting steel. Suitable for medium speed, medium feed and interrupted cut. IC9250 (P20-P30 M15-M30) TiCN/Al2O3/TIN multilayer, CVD coated. For grooving/turning forged, low carbon, low alloyed steel parts. For finishing & medium machining of stainless. IC907 (P10-P30 M05-M20 S05-S20 H05-H15) Tough submicron substrate, TiAIN PVD coated. Suitable for turning heat resistant alloys, austenitic stainless and hard steel at low to medium speeds. IC9025 (P20-P30 M15-M30) TiCN/Al2O3/TIN multilayer, CVD coated. For roughing/semi-finishing at medium speed. For unstable machining conditions. Very tough. Chip Breaker: SM. Application: Finish. Chip Breaker: 14. Application: Finish/Medium.

GBP 549.90
1

10x Iscar HM390 TPKT 1003PDR Insert Grade IC330

10x Iscar HM390 TPKT 1003PDR Insert Grade IC330

HM390 TPKT Milling Inserts Triangular inserts with 3 helical cutting edges, for 90 shoulder accuracy. For general use applications. Insert Grade IC330 A tough grade TiCN+TiN PVD coated with a 'SUMO TEC' surface treatment. Used for milling a wide range of workpiece materials, at low to medium cuttingspeeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN

GBP 469.90
1

10x Iscar HM390 TDKT 1505PDR Insert Grade IC330

10x Iscar HM390 TDKT 1505PDR Insert Grade IC330

HM390 TDKT Milling Inserts Triangular inserts with 3 helical cutting edges, for 90 shoulder accuracy. For general use applications. Insert Grade IC330 A tough grade TiCN+TiN PVD coated with a 'SUMO TEC' surface treatment. Used for milling a wide range of workpiece materials, at low to medium cuttingspeeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN

GBP 529.90
1

10x Iscar HFPR 5004 Insert Grade IC808

10x Iscar HFPR 5004 Insert Grade IC808

HFPR/L : Utility double-ended face machining inserts. Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade : IC328 A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC9015 A hard substrate with a cobalt enriched layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to chipping and plastic deformation. Recommended for high speed machining of steel at stable conditions. ISO Range - P/M/K: (P10-P30)(K10-K15) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC428 For wide range of applications, maching conditions and materials. For turning cast iron. ISO Range - P/M/K: (P05-P15)(K05-K20) ISO Range - H/S/N: (H15-H25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade : IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 1119.90
1