439 results (0,14738 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Iscar GIM-3 Insert Grade IC354

Iscar GIM-3 Insert Grade IC354

GIM-J-RA/LA : First choice for soft materials, parting of tubes, small diameters and thin-walled parts. General application on low carbon, alloy and austenitic stainless steel. Low-to-medium feeds. Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC354 medium to high cutting speeds. ISO Range - P/M/K (P20-P40)(M10-M30) ISO Range - H/S/N Grade or Coating Type PVD Coating Layers TiCN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type UN-COATED Coating Layers Uncoated IC20 (K10-K20). Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance. Images are for illustration purposes only.

GBP 112.99
1

Iscar GIM-3 Insert Grade IC328

Iscar GIM-3 Insert Grade IC328

GIM-J-RA/LA : First choice for soft materials, parting of tubes, small diameters and thin-walled parts. General application on low carbon, alloy and austenitic stainless steel. Low-to-medium feeds. Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC354 medium to high cutting speeds. ISO Range - P/M/K (P20-P40)(M10-M30) ISO Range - H/S/N Grade or Coating Type PVD Coating Layers TiCN Grade : IC908 Machining conditions. ISO Range - P/M/K (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N (H10-H20)(S10-S25) Grade or Coating Type PVD Coating Layers TiAlN Grade : IC328 ISO Range - P/M/K (P25-P40)(M30-M40) ISO Range - H/S/N (S20-S30) Grade or Coating Type PVD Coating Layers TiCN Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type UN-COATED Coating Layers Uncoated IC20 (K10-K20). Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance. Images are for illustration purposes only.

GBP 112.99
1

Iscar GSFN-3 Insert Grade IC328

Iscar GSFN-3 Insert Grade IC328

GSFN: SELF-GRIP slitting inserts. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC908 Machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC928 Heavy operations. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: TiAlN

GBP 113.99
1

Iscar GFN-4 Insert Grade IC908

Iscar GFN-4 Insert Grade IC908

GFN-C : First choice for the parting of bars, hard materials and tough applications. Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength. Medium-to-high feeds. IC30N Grade description: (P05 - P25). Cermet grade for carbon steel, tool steel, alloy steel, steel casting, malleable cast iron, austenitic stainless steel, martensitic stainless steel, free cutting steel. Suitable for medium speed, medium feed and interrupted cut. Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN

GBP 119.99
1

Iscar GIMY-420 Insert Grade IC908

Iscar GIMY-420 Insert Grade IC908

GIMY (full radius) : Utility single-ended inserts with F/Y-type chipformers, used for deep grooving and turning at low-to-medium feeds. The full-radius inserts can cut arcs to 250. Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC20N A cermet grade, used for grooving and turning applications. Recommended for semi-finishing and finishing operations when excellent surface finish is required. Wear resistant, prevents built-up edge. ISO Range - P/M/K: (P05-P25)(M05-M15) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC635 For low speed, high feed and unfavorable conditions. ISO Range - P/M/K: (P30-P50)(M20-M40) Grade or Coating Type: CVD Coating Layers: TiN+TiC+TiN

GBP 133.99
1

Iscar GIPI-2.70-0.10 Insert Grade IC20

Iscar GIPI-2.70-0.10 Insert Grade IC20

GIPI: Double-ended precision inserts with P-type chipformer for internal grooving and recessing at medium feeds. Grade : IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC328 A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade : IC9054 A CVD multilayer TiCN / Al2O3 / TiN coated grade. A tough grade, used for and grooving and turnig carbon, alloyed and stainless steel, at medium to high cutting speed. ISO Range - P/M/K: (P15-P40)(M10-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC656 A CVD coated grade used for semiroughing and medium machining at medium speed and high to medium feed of carbon, tool and stainless steel. ISO Range - P/M/K: (P20-P40)(M20-M40) Grade or Coating Type: CVD Coating Layers: TiCN+TiC+TiN

GBP 169.99
1

Iscar GIPI-3.00E-0.40 Insert Grade IC20

Iscar GIPI-3.00E-0.40 Insert Grade IC20

GIPI: Double-ended precision inserts with P-type chipformer for internal grooving and recessing at medium feeds. Grade : IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC328 A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC830 A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: AlTiN+TiN Grade : IC9054 A CVD multilayer TiCN / Al2O3 / TiN coated grade. A tough grade, used for and grooving and turnig carbon, alloyed and stainless steel, at medium to high cutting speed. ISO Range - P/M/K: (P15-P40)(M10-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade : IC656 A CVD coated grade used for semiroughing and medium machining at medium speed and high to medium feed of carbon, tool and stainless steel. ISO Range - P/M/K: (P20-P40)(M20-M40) Grade or Coating Type: CVD Coating Layers: TiCN+TiC+TiN

GBP 169.99
1

Iscar GSFN-5 Insert Grade IC328

Iscar GSFN-5 Insert Grade IC328

GSFN: SELF-GRIP slitting inserts. Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade : IC328 ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30) Grade or Coating Type: PVD Coating Layers: TiCN Grade : IC908 Machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC928 Heavy operations. ISO Range - P/M/K: (P20-P40)(M25-M35) ISO Range - H/S/N: (S15-S30) Grade or Coating Type: PVD Coating Layers: TiAlN

GBP 129.99
1

Iscar GFF-2N Insert Grade IC656

Iscar GFF-2N Insert Grade IC656

GFF-N: SELF-GRIP, face grooving inserts. Grade : IC354 medium to high cutting speeds. ISO Range - P/M/K (P20-P40)(M10-M30) ISO Range - H/S/N Grade or Coating Type PVD Coating Layers TiCN Grade : IC635 ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN Grade : IC656 ISO Range - P/M/K (P20-P40)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+TiC+TiN Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type UN-COATED Coating Layers Uncoated

GBP 102.99
1

Iscar GFF-3N Insert Grade IC635

Iscar GFF-3N Insert Grade IC635

GFF-N: SELF-GRIP, face grooving inserts. Grade : IC354 medium to high cutting speeds. ISO Range - P/M/K (P20-P40)(M10-M30) ISO Range - H/S/N Grade or Coating Type PVD Coating Layers TiCN Grade : IC635 ISO Range - P/M/K (P30-P50)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiN+TiC+TiN Grade : IC656 ISO Range - P/M/K (P20-P40)(M20-M40) ISO Range - H/S/N Grade or Coating Type CVD Coating Layers TiCN+TiC+TiN Grade : IC20 Uncoated carbide grade. ISO Range - P/M/K (M10-M25)(K10-K20) ISO Range - H/S/N (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type UN-COATED Coating Layers Uncoated

GBP 99.99
1

Iscar GTR-4-8D Insert Grade IC50M

Iscar GTR-4-8D Insert Grade IC50M

Grade Name: IC354 Insert Material: CARBIDE - PVD COATED ISO Range: P20-40 M10-30 ANSI Range: C5-C6 Coating Description: TiN/TiCN Grade Description: 'A TiN/TiCN PVD coated, tough grade. Used for general applications in parting and grooving carbon, alloy and stainless steel at medium to high cutting speeds.' Grade: IC20 Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade. ISO Range - P/M/K: (M10-M25)(K10-K20) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC50M Recommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions. ISO Range - P/M/K: (P20-P30)(M25-M40) Grade or Coating Type: UN-COATED Coating Layers: Uncoated

GBP 89.99
1