35 results (0,12282 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

MINI R56 UNSTRIPPED FITMENT - CLEARANCE - RED

MINI R56 UNSTRIPPED FITMENT - CLEARANCE - RED

WE HAVE 3 R56 UNSTRIPPED FITMENT CAGES IN STOCK!   THESE WERE ORDERED BY ONE CLIENT WHO DIDNT REALISE SOME TRIMMING WOULD BE REQUIRED TO FIT THE CAGE. THE REAR OF THE CAGE PASSES THROUGH THE REAR PANELS AND REQUIRES THE ARM REST TO BE CUT OUT AS WELL AS SOME OFF THE INNER SILL TRIM TO CLEAR THE MOUNT.   THESE 3 CAGES ARE COATED RED AND APPEAR UNDAMAGED HOWEVER WE HAVE NOT UNPACKED THEM YET WILL FIT MINI R50/R53 WITH TALLER CENTRE MOUNTS RETAIL AT £639 EACH DELIVERED INCLUDING VAT £553 DELIVERED TO CLEAR!

GBP 418.00
1

Mini R56 PAN ROOF UNSTRIPPED FITMENT IN RED - CLEARANCE

Mini R56 PAN ROOF UNSTRIPPED FITMENT IN RED - CLEARANCE

WE HAVE 1 R56 UNSTRIPPED PAN ROOF FITMENT CAGE IN STOCK!   ORDERED BY ONE CLIENT WHO DIDNT REALISE SOME TRIMMING WOULD BE REQUIRED TO FIT THE CAGE. THE REAR OF THE CAGE PASSES THROUGH THE REAR PANELS AND REQUIRES THE ARM REST TO BE CUT OUT AS WELL AS SOME OFF THE INNER SILL TRIM TO CLEAR THE MOUNT.   THIS HAS HAD 1 FOOT BEND IN TRANSIT AND THE PAINT HAS SLIGHTLY CRACKED, EASY JOB TO STRAIGHTEN BEFORE FITTING AND WONT BE SEEN WHEN CARPET IS TRIMMED TO SUIT.   WILL FIT MINI R55/50 WITH TALLER MOUNTS   RETAIL AT £639 EACH DELIVERED INCLUDING VAT £553.95 DELIVERED TO CLEAR!

GBP 405.00
1

MINI R50/R53 Rear ‘X’ Brace

MINI R50/R53 Rear ‘X’ Brace

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, and bolts. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 317.40
1

Mini R56 Rear X Brace (Gussets: Yes)

Mini R56 Rear X Brace (Gussets: Yes)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 317.40
1

Mini R56 Rear X Brace (Gussets: No)

Mini R56 Rear X Brace (Gussets: No)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 317.40
1

Mini R56 Rear X Brace (Gussets: Curved Gussets)

Mini R56 Rear X Brace (Gussets: Curved Gussets)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 317.40
1

MINI R50/R53 Rear ‘X’ Brace (Colour: Unpainted)

MINI R50/R53 Rear ‘X’ Brace (Colour: Unpainted)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, and bolts. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 276.00
1

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: Yes)

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: Yes)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 276.00
1

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: No)

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: No)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 276.00
1

MINI R50/R53 Rear ‘X’ Brace (Colour: Specific RAL)

MINI R50/R53 Rear ‘X’ Brace (Colour: Specific RAL)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, and bolts. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 345.00
1

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: No)

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: No)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 345.00
1

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: Yes)

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: Yes)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 345.00
1

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: Curved Gussets)

Mini R56 Rear X Brace (Colour: Unpainted, Gussets: Curved Gussets)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 276.00
1

MINI R50/R53 Rear ‘X’ Brace (Colour: Specific Metallic RAL)

MINI R50/R53 Rear ‘X’ Brace (Colour: Specific Metallic RAL)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, and bolts. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 372.60
1

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: Curved Gussets)

Mini R56 Rear X Brace (Colour: Specific RAL, Gussets: Curved Gussets)

This cross bar mounts to the C-pillar seat belt mounting points and directly to the lower chassis cross member adding significant rigidity to the rear, reducing overall chassis flex. Constructed from high tensile cold draw seamless roll cage tube.. By using this we are able to reduce the wall thickness of the material and still obtain maximum strength whilst saving weight. This brace includes Gusseting which further increases flex resistance and increases aesthetic appeal! Fits with interior trims in place. This kit consists of the main X, bolts and Rivnuts. This is the Exact same brace for the R53 however the cross beam the lower bar mounts too in the R56 does not have factory mounting holes, for the R56 you will need to drill and rivnut this beam to mount the brace to it. Available powdercoated in a range of colours! Weight:  Approx 6.5KG

GBP 345.00
1