66 results (0,18466 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Kennedy 8X22MM Conical 14DEG. Carbide Burr Cut 9

Kennedy 8X22MM Conical 14DEG. Carbide Burr Cut 9

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 20.99
1

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Cut 9 chipbreaker carbide burrs are manufactured from a tough carbide substrate for fast stock removal, improved control and reduced chips. Ideal for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Carbide construction for increased tool toughness Cut 9 chipbreaker geometry for fast stock removal Ideal for use on hard materials up to HRC65 Typical Applications Deburring Cast iron Cast steel Carbon steel Alloy steel Stainless steel Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 17.99
1

Kennedy 10X20MM Pointed Tree Carbide Burr Cut 9

Kennedy 10X20MM Pointed Tree Carbide Burr Cut 9

Pointed Tree chipbreaker carbide burrs offer fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Their hardy uncoated carbide construction offers a prolonged tool life with versatility Features and Benefits Uncoated carbide construction with bright finish for tool toughness Chipbreaker (Cut 9): for use on cast iron, carbon steel, alloy steel 50RC and 60RC Versatile suitable for deburring and polishing applications Notes Not suitable for milling large amounts of material Typical Applications Cast iron Cast steel Carbon steel Alloy steel Stainless steel up to HRC65 hardness

GBP 18.39
1

12X25MM Round Tree Carbide Burr Cut 9

12X25MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

Kennedy 16X14MM Conical 60DEG. Carbide Burr Cut 9

Kennedy 16X14MM Conical 60DEG. Carbide Burr Cut 9

Conical 60 Inc. Angle. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 21.99
1

Kennedy 19X16MM Inverted Cone Carbide Burr Cut 9

Kennedy 19X16MM Inverted Cone Carbide Burr Cut 9

Inverted Cone. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 27.99
1

12X25MM Cylindrical Carbide End Cut Burr Cut 9

12X25MM Cylindrical Carbide End Cut Burr Cut 9

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

Kennedy 16X25MM Round Tree Carbide Burr Cut 9

Kennedy 16X25MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 21.99
1

Kennedy 10X20MM Round Tree Carbide Burr Cut 9

Kennedy 10X20MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 20.99
1

Kennedy 16X25MM Oval Shape Carbide Burr Cut 9

Kennedy 16X25MM Oval Shape Carbide Burr Cut 9

Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

Kennedy 16X25MM Cylindrical Carbide Plain End Burr Cut 9

Kennedy 16X25MM Cylindrical Carbide Plain End Burr Cut 9

Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 29.99
1

Kennedy Long Arm Ball Point Hex Key Set 1.5-2-2.5-3-4-5-6-8-10mm (9-PC)

Kennedy Long Arm Ball Point Hex Key Set 1.5-2-2.5-3-4-5-6-8-10mm (9-PC)

The 9-piece Long Arm Ball Point Hex Key Set is a professional-grade toolset that offers superior performance and durability, perfect for driving internal hexagon socket fasteners. The set includes sizes from 1.5 to 10 mm, with clear size markings for easy identification and a holder with a hole for convenient wall hanging. Features and Benefits Coloured for easy identification Holder with a hole allows for convenient wall-hanging Ballpoint ends allow for angled entry in tight spaces

GBP 21.39
1

Kennedy 9" Carpenters Rosewood Sliding Bevel

Kennedy 9" Carpenters Rosewood Sliding Bevel

Used for marking regular and irregular angles, these sliding bevels are ideal for use in woodworking and carpentry where angles are required to be transferred between timber. The sliding steel blade can be locked into any position using the brass thumbscrew. Each product is manufactured from a rosewood stock with brass tips for greater wear resistance and is available in two sizes. Features and Benefits Manufactured from rosewood stock and brass tips making for a robust product Sliding steel blade offers durability and holds a good cutting edge Brass thumbscrew allows the blade to be locked into any position for versatility of use Possesses a good wear resistance due to the hard-wearing construction Typical Applications Carpentry Woodworking

GBP 23.99
1

Kennedy 10.0mm (Set of 9) Figure Punches

Kennedy 10.0mm (Set of 9) Figure Punches

These hand stamp sets produce a standard positive indent of either numbers or letters depending upon your product selection. The product is manufactured from drawn carbon steel and is nickel-plated with chamfered edges to prevent accidental damage to the workpiece. Always check the set contents before purchasing, as the sets vary in quantities and contents. Features and Benefits Nickel plating further protects the product from corrosion and wear and tear Manufactured from carbon steel for overall durability Chamfered edges prevent accidental damage to the workpiece Available in a variety of specifications including just numbers or a combination of numbers and letters in differing quantities to suit your requirements Typical Applications Industrial Warehousing Labelling

GBP 27.99
1

Kennedy 230mm/9" Long Nose Locking Pliers

Kennedy 230mm/9" Long Nose Locking Pliers

Specially designed with long slim jaws to enable access to restricted areas, these locking pliers are available in two sizes. Boasting numerous features such as a quick release, rolled chrome vanadium steel bodies, drop forged hardened steel jaws with corrosion-resistant bright nickel coating, an adjustable opening and clamping pressure via the knurled head screw which is fitted with wire spring to ensure efficient opening of the jaws. Finished by a locking mechanism that holds the wrench in place once adjusted, leaving both hands free. Features and Benefits Manufactured from rolled chrome vanadium steel which is highly resilient Long slim jaws enable access to restricted or hard to reach areas Quick release action allows you to release fasteners with ease Corrosion resistant bright nickel coating to protect the tool Knurled head screw allows you to adjust the clamping pressure and jaw opening to suit your application Locking mechanism holds the wrench in place, allowing you to have both hands free Typical Applications DIY Plumbing Construction Engineering

GBP 19.99
1

Kennedy 8.0mm (Set of 9) Figure Punches

Kennedy 8.0mm (Set of 9) Figure Punches

These hand stamp sets produce a standard positive indent of either numbers or letters depending upon your product selection. The product is manufactured from drawn carbon steel and is nickel-plated with chamfered edges to prevent accidental damage to the workpiece. Always check the set contents before purchasing, as the sets vary in quantities and contents. Features and Benefits Nickel plating further protects the product from corrosion and wear and tear Manufactured from carbon steel for overall durability Chamfered edges prevent accidental damage to the workpiece Available in a variety of specifications including just numbers or a combination of numbers and letters in differing quantities to suit your requirements Typical Applications Industrial Warehousing Labelling

GBP 19.99
1

Kennedy Harmonic Balance Puller Kit (9-Pce)

Kennedy Harmonic Balance Puller Kit (9-Pce)

SWP9 Steering Wheel Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels. Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16" x 24 UNF). 2x 75mm screws (3/8" x 16 UNC). 2x 90mm screws (5/16" x 18 UNC). 1x plastic storage tray. HPB9 Harmonic Balance For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2" to 4 5/8"). Ductile steel yoke. Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8" x 24 UNF). 3x 75mm screws (3/8" x 16 UNC). 1x plastic storage tray. CP18 Combination Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2" to 4 5/8"). Contents: As SWP9 and HPB9 above.

GBP 20.99
1

Kennedy 12.0mm (Set of 9) Figure Punches

Kennedy 12.0mm (Set of 9) Figure Punches

These hand stamp sets produce a standard positive indent of either numbers or letters depending upon your product selection. The product is manufactured from drawn carbon steel and is nickel-plated with chamfered edges to prevent accidental damage to the workpiece. Always check the set contents before purchasing, as the sets vary in quantities and contents. Features and Benefits Nickel plating further protects the product from corrosion and wear and tear Manufactured from carbon steel for overall durability Chamfered edges prevent accidental damage to the workpiece Available in a variety of specifications including just numbers or a combination of numbers and letters in differing quantities to suit your requirements Typical Applications Industrial Warehousing Labelling

GBP 24.99
1

Kennedy 10X26MM Conical 14DEG. Carbide Burr Cut 3

Kennedy 10X26MM Conical 14DEG. Carbide Burr Cut 3

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 31.99
1

Kennedy 12X28MM Conical 14DEG. Carbide Burr Cut 3

Kennedy 12X28MM Conical 14DEG. Carbide Burr Cut 3

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 39.99
1