KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Kentec MM-24-00-00-6M2 Addressable Matrix Panel

Kentec MM-24-00-00-6M2 Addressable Matrix PanelThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. It has a Maximum of 24 LEDs and no control.Key FeaturesCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsM2 Surface mount enclosure 385mm W x 310mm H x 90mm DRequires 21-30V DC supply

GBP 1027.60

1

Kentec INST-SFP-MM-01-K SFP Multi-Mode Fibre Optic Transceiver 550m

Kentec INST-SFP-MM-01-K SFP Multi-Mode Fibre Optic Transceiver 550mINST-SFP-MM-01-K is a fibre optic transceiver for use with multimode fibre optic cable and operates at a nominal wavelength of 850nm.This dongle is locked and pre-configured for use with the Kentec DNX-R-2FFC-K RS485Fibre Dual Fibre Dynamic Network Analyser.INST-SFP-MM-01-K transceivers are hot-pluggable making it quick easy to replace and also swap between alternate fibre optic modes.Maximum range will be dependent upon the fibre optic cable used 62.5125m range of 550m 50125m can extend the range up to 1km. The transmitter section uses a Vertical Cavity Surface Emitted Laser and is class 1 laser compliant according to International Safety Standard IEC60825.The receiver section uses an Integrated GaAs detector pre-amplifier IDP mounted in an optical header and a limiting post-amplifier IC. INST-SFP-MM-01-K is designed to be compliant with SFF-8472 MSA.Built in digital diagnostic functions allow monitoring of the transceiver by the DNX-R-2FFC-K analyser module and subsequently the IVIEW software tool. This allows performance monitoring along with early warning of a potential issue to enable preventative maintenance.Key FeaturesPlug-in transceiver for use with DNX-R-2FFC-K analysers provides a multi-mode fibre communication link between transceivers on the networkMax distance between analysers 550mOperating data rates up to 1.25GbpsSingle 3.3V power supply and TTL Logic InterfaceHot-pluggable SFP footprint duplex LC connector interface.Class 1 FDA and IEC60825-1 laser safety compliant.Commercial temperature range -4085oCCompliant with SFF-8472 MSABuilt-in digital diagnostic functions including optical power monitoring

GBP 131.75

1

Kentec MM-24-00-00-6PM3 Addressable Matrix Panel cw PSU

Kentec MM-24-00-00-6PM3 Addressable Matrix PanelThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. It has a maximum of 24 LEDs and comes with a PSU but no controls.Key FeaturesCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsM3 Surface mount enclosure 385mm W x 520mm H x 90mm DInternal PSU 230V AC input

GBP 1233.12

1

Kentec MM-24-00-00-6PS3 Addressable Matrix Panel CW PSU

Kentec MM-24-00-00-6PS3 Addressable Matrix Panel No ControlsAddressable Matrix panel - Max 24 LEDs cw PSU no controlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. It comes with a Max of 24 LEDs cw PSU no controlsKey FeaturesCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsS3 Surface mount enclosure 500mm W x 355mm H x 120mm DInternal PSU 230V AC input

GBP 1233.12

1

Kentec MM-56-00-00-6PS4 Addressable Matrix Panel - Max 56 LEDs cw PSU

Kentec MM-56-00-00-6PS4 Addressable Matrix Panel - Max 56 LEDs comes with PSU No ControlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved removed or added on site without the need for any wiring.Ideal for buildings such as hospitals where the building layout may evolve over a period. As the building changes so too can the addressable Matrix with very little cost or disruption.The Addressable Matrix can be supplied with or without common LEDs and controls. Optional LEDs indicate Power on Fire Fault and Disablement and optional controls are for Alarm silence Buzzer silence Lamp test and Reset.It provides a clear geographical indication of fire alarm or other system activation enabling speedy identification of the source of an alarm or other events.Up to 32 mimic PCBs can be connected to a single Syncro AS or Taktis Fire panel giving a total of 504 LEDs that can be individually configured via the standard loop explorer configuration software. To increase the flexibility of this product further the LED extension boards are available in with yellow or green indicators fitted.Key FeaturesFlexible fibre optic light guides to illuminate areas on a floor planHigh-resolution gridCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsS4 Surface mount enclosure 500mm W x 650mm H x 140mm DInternal PSU 230V AC input

GBP 1937.76

1

Kentec MM-104-00-00-6PS4 Addressable Matrix Panel - Max 104 LEDs cw PSU

Kentec MM-104-00-00-6PS4 Addressable Matrix Panel - Max 104 LEDs comes with PSU No ControlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved removed or added on site without the need for any wiring.Ideal for buildings such as hospitals where the building layout may evolve over a period. As the building changes so too can the addressable Matrix with very little cost or disruption.The Addressable Matrix can be supplied with or without common LEDs and controls. Optional LEDs indicate Power on Fire Fault and Disablement and optional controls are for Alarm silence Buzzer silence Lamp test and Reset.It provides a clear geographical indication of fire alarm or other system activation enabling speedy identification of the source of an alarm or other events.Up to 32 mimic PCBs can be connected to a single Syncro AS or Taktis Fire panel giving a total of 504 LEDs that can be individually configured via the standard loop explorer configuration software. To increase the flexibility of this product further the LED extension boards are available in with yellow or green indicators fitted.Key FeaturesFlexible fibre optic light guides to illuminate areas on a floor planHigh-resolution gridCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsS4 Surface mount enclosure 500mm W x 650mm H x 140mm DInternal PSU 230V AC input

GBP 2642.40

1

Kentec MM-152-00-00-6PS4 Addressable Matrix panel - Max 152 LEDs cw PSU

Kentec MM-152-00-00-6PS4 Addressable Matrix Panel - Max 152 LEDs comes with PSU No ControlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved removed or added on site without the need for any wiring.Ideal for buildings such as hospitals where the building layout may evolve over a period. As the building changes so too can the addressable Matrix with very little cost or disruption.The Addressable Matrix can be supplied with or without common LEDs and controls. Optional LEDs indicate Power on Fire Fault and Disablement and optional controls are for Alarm silence Buzzer silence Lamp test and Reset.It provides a clear geographical indication of fire alarm or other system activation enabling speedy identification of the source of an alarm or other events.Up to 32 mimic PCBs can be connected to a single Syncro AS or Taktis Fire panel giving a total of 504 LEDs that can be individually configured via the standard loop explorer configuration software. To increase the flexibility of this product further the LED extension boards are available in with yellow or green indicators fitted.Key FeaturesFlexible fibre optic light guides to illuminate areas on a floor planHigh-resolution gridCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsS4 Surface mount enclosure 500mm W x 650mm H x 140mm DInternal PSU 230V AC input

GBP 3464.50

1

Kentec MM-56-00-00-6PM3 Addressable Matrix Panel - Max 56 LEDs cw PSU

Kentec MM-56-00-00-6PM3 Addressable Matrix Panel - Max 56 LEDs comes with PSU No ControlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved removed or added on site without the need for any wiring.Ideal for buildings such as hospitals where the building layout may evolve over a period. As the building changes so too can the addressable Matrix with very little cost or disruption.The Addressable Matrix can be supplied with or without common LEDs and controls. Optional LEDs indicate Power on Fire Fault and Disablement and optional controls are for Alarm silence Buzzer silence Lamp test and Reset.It provides a clear geographical indication of fire alarm or other system activation enabling speedy identification of the source of an alarm or other events.Up to 32 mimic PCBs can be connected to a single Syncro AS or Taktis Fire panel giving a total of 504 LEDs that can be individually configured via the standard loop explorer configuration software. To increase the flexibility of this product further the LED extension boards are available in with yellow or green indicators fitted.Key FeaturesFlexible fibre optic light guides to illuminate areas on a floor planHigh-resolution gridCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsM3 Surface mount enclosure 385mm W x 520mm H x 90mm DInternal PSU 230V AC input

GBP 1702.88

1

Kentec MM-56-00-00-6PS3 Addressable Matrix Panel - Max 56 LEDs cw PSU

Kentec MM-56-00-00-6PS3 Addressable Matrix Panel - Max 56 LEDs comes with PSU No ControlsThe Addressable Matrix system uses flexible fibre optic light guides to illuminate areas on a floor plan laid over a high-resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved removed or added on site without the need for any wiring.Ideal for buildings such as hospitals where the building layout may evolve over a period. As the building changes so too can the addressable Matrix with very little cost or disruption.The Addressable Matrix can be supplied with or without common LEDs and controls. Optional LEDs indicate Power on Fire Fault and Disablement and optional controls are for Alarm silence Buzzer silence Lamp test and Reset.It provides a clear geographical indication of fire alarm or other system activation enabling speedy identification of the source of an alarm or other events.Up to 32 mimic PCBs can be connected to a single Syncro AS or Taktis Fire panel giving a total of 504 LEDs that can be individually configured via the standard loop explorer configuration software. To increase the flexibility of this product further the LED extension boards are available in with yellow or green indicators fitted.Key FeaturesFlexible fibre optic light guides to illuminate areas on a floor planHigh-resolution gridCompatible with Taktis and Syncro AS panelsUp to 24 LED indications no controlsS3 Surface mount enclosure 500mm W x 355mm H x 120mm DInternal PSU 230V AC input

GBP 1702.88

1

Kentec K407 Switched Mode Power Supply Charger - 2.5 Amp PSU

Kentec Switched Mode Power Supply Charger K407The S407S406 power supplybattery charger has been developed using switched mode technology to produce an efficient and lightweight power unit for a host of fire alarm applications. Suited to almost any application the S407S406 is designed to be a universal power source which will reduce spares stock holding and increase serviceability of systems. The comprehensive monitoring features of the S407S406 include true battery present detection low battery voltage warning battery overcharge warning and low battery shut off. These features combined with the temperature compensated charger output will increase the service life of sealed lead acid batteries.Key FeaturesComplies with EN54-4Fully enclosed constructionSmall lightweightTrue 2.5 Amp or 5.25 Amp continuous outputComprehensive fault monitoringTemperature compensated chargerWide input supply voltageEnclosed or chassis only versions availableLow battery shut off to prevent deep discharge of battery

GBP 282.92

1

Kentec KD2525003 Dual Power Output Supply Boxed 2.5 Amp PSU Max 12 AH Battery Surface

Kentec KD2525003 Dual Power Output Supply Boxed 2.5 Amp PSU Max 12 AH Battery SurfaceDual Power Output Supply Boxed To match Syncro Styling 2.5 Amp PSU Max 12 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorythms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply. Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications.Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 488.30

1

Kentec K2525003 Power Supply Boxed 2.5 Amp PSU Max 12 AH Battery Surface

Kentec K2525003 Power Supply Boxed To match Syncro Styling 2.5 Amp PSU Max 12 AH Battery SurfaceSyncro Power fully certified to EN54-4 power supplies provide a stable and fully regulated true 24V output for fire alarm system applications under all power conditions.The unique regulation techniques ensure that even when running on standby batteries a stable 24V supply is available to all parts of the system ensuring that all 24V powered devices connected are supplied with optimum power.The powerful onboard microcontroller ensures that all battery types are conditioned with optimum temperature compensated charging algorithms to maximise battery life and maintain batteries in top condition.Syncro Power EN54-4 compliant power supplies can be fitted with an optional dual fused output monitoring module to ensure compliance with European standards when supplying fire control panels with an external power supply.Enclosed units are available to match both Sigma and Syncro equipment ranges and all are finished with matching livery and provide power on and power fault indications. Optional dual output path KD variant available to provide two independent supply paths between the power supply unit and the control panel in accordance with EN54-4 clause 6.4 and BS5839 pt1 clause 12.2.2.m requirements.Key Features2.5A and 5.25A versionsChassis only or enclosure mounted with battery space110V or 230V inputRegulated true 24V outputIntelligent battery charging and temperature compensationHouse up to 26Ah batteriesStatus indicators for monitored faultsDual output option for powering fire alarm control panels remotelyChassis versions have same mounting points

GBP 437.34

1

Kentec USB to RS232 Serial Converter for software download lead U187

Kentec USB to RS232 Serial Converter for software download lead U187Kentec U187 USB to RS232 Serial Converter for software download lead.Product DetailsModel U187Shipping Weight 200g

GBP 112.24

1

Kentec Sigma XT Extinguishant Coincidence Unit 1 Area to EN12094-1 Surface

Kentec Sigma XT Extinguishant Coincidence Unit 1 Area to EN12094-1 SurfaceThe Sigma XT ECU coincidence unit has two fully monitored inputs for connection to fire detection control equipment or addressable control modules to provide an EN12094-1 EN54-2 and EN54-4compliant extinguishant control system. Its many programmable features and extensive range of inputs and outputs make the Sigma XT ECU coincidence unit suitable for all extinguishing applications where a fully featured control device is required.Among the many features of the Sigma XT ECU are serially connected status units for reduced wiring and reduced installation cost dual extinguishant outputs that may be configured for mainreserve applications and a countdown timer which displays the time until discharge of the extinguishant in seconds. All units are independently configurable via a simple code based programming interface to suit the desired application.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-4Dual extinguishant outputsFirst and second stage sounder outputsFirst and second stages relay contactsMain reserve facilitySerial connection to status unitsDischarge countdown time indicator

GBP 616.56

1

Kentec K1620203 Battery Box to Match Syncro Styling Max 17 AH Battery Surface

Kentec K1620203 Battery Box to Match Syncro Styling Max 17 AH Battery Surface K16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 188.88

1

Kentec K1630313 Battery Box to Match Syncro Styling Max 38 AH Battery Surface

Kentec K1630313 Battery Box to Match Syncro Styling Max 38 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 252.30

1

Kentec K1619911 Battery Box to Match Syncro Styling Max 24 AH Battery Surface

Kentec K1619911 Battery Box to Match Syncro Styling Max 24 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 223.86

1

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery Surface

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 297.34

1

Kentec Sigma XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1 K11031M2

Kentec SigmaK11031M2XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals the Sigma XT K11031M2 extinguishant releasing panel offers outstanding value and performance for all small to medium fixed fire-fighting installations. With three detection zones as standard extinguishant release can be configured to activate from any combination of detection zone inputs to allow among other combinations any two from three type activations such as would be required for detection in ceiling void room and floor void applications.The extensive configuration options of the Sigma XT K11031M2 allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment EN12094-1 EN54-2 and EN54-4. The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety. The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status. With all of the electronics mounted on a single easily removable steel plate Sigma XT panels are both robust and easy to install. Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-4Three detection zones as standardAny single zone or any combinations of zones can be configured to releaseConfigurable first stage sounder delaysConfigurable detection delaysZero time delay upon manual release optionCompatible with I.S. barriersNon-latching zone input option to receive signals from other systems such as aspirating equipmentConfigurable extinguishant delays up to 60 seconds in 5 second stepsConfigurable extinguishant duration up to 5 minutes in 5 second stepsCountdown timer shows time remaining until releaseSupports up to seven four wire status indicatorsBuilt in Extract Fan control

GBP 587.21

1

Kentec Sigma XT Extinguishant Control Panel to BS EN12094-1 2 - 8 Zone

Kentec Sigma XT Extinguishant Control Panel to BS EN12094-1 2 - 8 ZoneSigma XT control panels are multi-area extinguishant control panels complying with EN12094-1 EN54-2 and EN54-4. Up to 8 zones of conventional detection with up to 4 extinguishant areas are available. Stand-alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules. Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface.All extinguishant areas may have up to 7 serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable. The versatility of the control panel can be enhanced further by the fitting of up to 7 Sigma CP Ancillary boards K580 or Sigma CP Sounder boards K461 to the RS485 serial bus. See data sheet DS39 and DS48. For compatible status units see Sigma Si data sheet DS41.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-42 4 or 8 detection zones1 to 4 extinguishant areasDual extinguishant outputs for each area configurable as MainReserveFirst and second stage sounder outputs for each areaFirst and second stage volt free changeover contacts for each areaReleased volt free contact per areaFault volt free contact per areaProgrammable extinguishant delaysProgrammable output durationExtract fan controlCountdown indicator shows time until release in secondsMode select and manual release controls per areaMonitored remote manual release inputMonitored remote Hold inputMonitored remote Mode select door interlock inputMonitored remote Released pressure switch inputMonitored remote Low Pressure switch inputMonitored Abort inputSerial connection for Sigma Si status units and ancillary boards. K588Part NumberDescriptionK21021M3Sigma XT 2 Zone Extinguishant Control Panel 1 Area SurfaceK21041M3Sigma XT 4 Zone Extinguishant Control Panel 1 Area SurfaceK21042M3Sigma XT 4 Zone Extinguishant Control Panel 2 Area SurfaceK21081M3Sigma XT 8 Zone Extinguishant Control Panel 1 Area SurfaceK21082M3Sigma XT 8 Zone Extinguishant Control Panel 2 Area SurfaceK21083M4Sigma XT 8 Zone Extinguishant Control Panel 3 Area Surface larger PSU 5.25AK21084M4Sigma XT 8 Zone Extinguishant Control Panel 4 Area Surface larger PSU 5.25A

GBP 734.00

1

Kentec IO Box with Chassis Fitted with Surface Enclosure

Kentec IO Box with Chassis Fitted with Surface EnclosureA range of enclosures designed to house IO modules with or with a power supply. The IO enclosure offers the installer the flexibility to create their own customised IO panel. The standard IO enclosure can hold up to 3 Syncro IO modules or 2 if a power supply is incorporated.Key FeaturesMatching design colour scheme for Kentec new style control panel rangeEasy to installIncorporates Kentecs Quick Fit lid equipment chassisFront panel mounted status led indicationSpace for 3.2Ah batteriesChoice of power suppliesVariants AvailablePart NumberDescriptionK16001M2IO Box with Chassis fitted cw Surface EnclosureK16250M2IO Box with Chassis fitted cw 2.5 A PSU Surface EnclosureK16400M2IO Box with Chassis fitted cw 5.25A PSU Surface Enclosure

GBP 127.92

1

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To Monitor

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To MonitorThe RIM100M-3-K provides a bi-directional InputOutput interface for relaying system states to RIM100E-K Ethernet modules. The RIM100M-3-K links to the RIM100E-K modules via an RS485 interface. The RIM100M-3-K supports two signal inputs and three relay outputs.The two inputs can typically be used to transfer the status of Fire and Fault states from a fire panel across a monitored link between twoRIM100E-K modules. All relay outputs are driven by signal states presented by the RIM100E-K module.The RIM100M-3-K activates an external relay contact based on the state of the monitored communication link between local and remote paired RIM100E-K modules.The module is housed in a DIN rail mountable enclosure with LED status indication visible on the front fascia of the module.Key FeaturesTwo bi-directional InputOutput signal states communicated across a link with RIM100E-K modulesSupports a simple monitored communication channel with configurable latencyAn effective solution for introducing a remote conventional Fire Alarm Control Panel to an existing network via a monitored communication channelSupport for debug via laptop with simple USB interfaceProduct is DIN rail mountableSimple LED system status indication for fire fault and monitored link

GBP 1022.52

1

Kentec K16100D3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 38 AH Battery Surface

Kentec K16100D3 Battery Box to Match Sigma CPXT Syncro AS Styling Max 38 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment.All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.Key FeaturesFully welded all steel constructionTough epoxy powder coated finishKey lockableWide range of styles and sizesUp to 65Ah batteries can be fittedFully enclosed and robust construction

GBP 209.88

1

Kentec K16100M2 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 7 AH Battery Surface

Kentec K16100M2 Battery Box to Match Sigma CPXT Syncro AS Styling Max 7 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 108.38

1

Kentec K16100M3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 17 AH Battery Surface

Kentec K16100M3 Battery Box to Match Sigma CPXT Syncro AS Styling Max 17 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 174.36

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)