10 results (0,13689 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Klaxon TCC-0002 Ex IS Beacon 24vDc Amber Lens

Klaxon TCC-0002 Ex IS Beacon 24vDc Amber Lens

Klaxon TCC-0002 Ex IS Beacon 24vDc Amber LensThis LED beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly On signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatible

GBP 187.96
1

Klaxon TCC-0005 Ex IS Beacon 24vDc Green with Clear Lens

Klaxon TCC-0005 Ex IS Beacon 24vDc Green with Clear Lens

Klaxon TCC-0005 Ex IS Beacon 24vDc Green with Clear LensThis LED beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly On signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatible

GBP 187.96
1

Klaxon TCC-0004 Ex IS Beacon 24vDc Blue with Clear Lens

Klaxon TCC-0004 Ex IS Beacon 24vDc Blue with Clear Lens

Klaxon TCC-0004 Ex IS Beacon 24vDc Blue with Clear LensThis LED beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly On signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatible

GBP 187.96
1

Klaxon TCC-0003 Ex IS Beacon 24vDc Red Lens

Klaxon TCC-0003 Ex IS Beacon 24vDc Red Lens

Klaxon TCC-0003 Ex IS Beacon 24vDc Red LensThis LED beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly On signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatible

GBP 187.96
1

Klaxon TCC-0006 Ex IS Beacon 24vDc White with Clear Lens

Klaxon TCC-0006 Ex IS Beacon 24vDc White with Clear Lens

Klaxon TCC-0006 Ex IS Beacon 24vDc White with Clear LensThis LED beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The beacon has a DIP switch that gives the options to change from a 1 Hz 60FPM flash rate to a static constantly On signal.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatible

GBP 187.96
1

Klaxon TCC-0007 Sonos IS SounderBeacon 24vDc Amber Lens

Klaxon TCC-0007 Sonos IS SounderBeacon 24vDc Amber Lens

Klaxon TCC-0007 Sonos IS SounderBeacon 24vDc Amber LensThe IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 232.19
1

Klaxon TCC-0008 Sonos IS SounderBeacon 24vDc Red Lens

Klaxon TCC-0008 Sonos IS SounderBeacon 24vDc Red Lens

Klaxon TCC-0008 Sonos IS SounderBeacon 24vDc Red LensThe IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 232.19
1

Klaxon TCC-0009 Sonos IS SounderBeacon 24vDc Blue with Clear Lens

Klaxon TCC-0009 Sonos IS SounderBeacon 24vDc Blue with Clear Lens

Klaxon TCC-0009 Sonos IS SounderBeacon 24vDc Blue with Clear LensThe IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter.A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleWhite base version available MOQ applyDustproof Weatherproof

GBP 232.19
1

Klaxon TCC-0011 Ex IS SounderBeacon 24vDc White With Clear Lens

Klaxon TCC-0011 Ex IS SounderBeacon 24vDc White With Clear Lens

Klaxon TCC-0011 Ex IS SounderBeacon 24vDc White With Clear LensThe IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter. A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleDustproof Weatherproof

GBP 232.19
1

Klaxon TCC-0010 Ex IS SounderBeacon 24vDc Green With Clear Lens

Klaxon TCC-0010 Ex IS SounderBeacon 24vDc Green With Clear Lens

Klaxon TCC-0010 Ex IS SounderBeacon 24vDc Green With Clear LensThe IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I Mining Group II Above Ground applications and incorporates a high Ingress Protected IP66 enclosure.The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter. A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists clicks into the pre-fixed base on commissioning avoiding any additional wiring connections.This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo 28v Io 93mA Po 660mW Ci 0 Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.Key FeaturesApproved by ATEX IECExGroup I MI Ex ia I MaGroup II IGD Ex ia IIC T6 Ga Ex ia IIIC T85C DaZones 0 1 2 20 21 22Conforms to EN 60079-02012 All2013 IEC 60079-02011 EN-60079-112012 IEC 60079-112011Diode Polarised End of line resistor compatibleDustproof Weatherproof

GBP 232.19
1