18 results (0,18212 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

Makita TW001GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.

GBP 0.00
1

Makita TW008GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

Makita TW008GZ XGT 40Vmax BL Impact Wrench 40V Bare Unit

The Makita TW008G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square Pin Detent.No Load Speed: 0-600/1,200/1,900/2,300/min.Impact Rate: 0-1,200/1,900/2,700/2,900/bpm.Max. Torque: 760Nm.Nut Busting Torque: 1,100Nm.Bolt Capacity: Standard: M10-M24, High Tensile: M10-M16.

GBP 0.00
1

Makita HP1640 Percussion Drill 13mm Keyed Chuck 680W 110V MAKHP1640L

Makita HP1640 Percussion Drill 13mm Keyed Chuck 680W 110V MAKHP1640L

The Makita HP1640 Percussion Drill is fitted with a 13mm Keyed Chuck. It has a variable speed trigger and forward/reverse rotation for increased control. The tool is double insulated for increased user safety. It is supplied with a side handle and a depth stop. Specifications: Input Power: 680W.No Load Speed: 0-2,800/min.Impact Rate: 0-44,800/bpm.Capacity: Masonry 16mm, Steel 13mm, Wood 30mm.Weight: 2.0kg. Vibration Hammer Drilling: 19 m/sec.Vibration K Factor: 2 m/sec.Noise Sound Power: 103 dB(A).Noise Sound Pressure: 92 dB(A).Noise K Factor: 3 dB(A).

GBP 94.99
1

Makita 40VMax XGT 305mm Disc Cutter (Body Only)

Makita 40VMax XGT 305mm Disc Cutter (Body Only)

A cordless disc cutter with a blade diameter of 305mm The Makita CE004G Disc Cutter delivers robust cutting power with a lighter, cordless design, making it an ideal choice for demanding cutting applications. Equipped with a large 305mm blade and powered by Makitas 40Vmax XGT Li-Ion battery system, it offers the power of traditional engine models with reduced weight and enhanced portability. Features: Active Feedback Sensing Technology (AFT) stops the motor instantly if the blade rotation is suddenly forced to stop, enhancing operator safety Electric Brake provides a rapid stop to the blade, increasing productivity and user safety during operation It can be connected to a water supply kit, reducing dust during cutting for safer, cleaner operation Lock-Off Button prevents accidental startups The Rotatable Guard is adjustable to suit various working postures LED Job Light illuminates the work area for improved visibility in low-light conditions Specification: Voltage: 40V Max XGT Blade Diameter: 305 mm Max Depth of Cut: 121 mm Bore Size: 20/25.4 mm No Load Speed: 5000 rpm Vibration (Concrete Cutting) : 3.8/ 2.5 m/s Noise Levels: Sound Power Level (LWA) : 110 dB (A) ; Sound Pressure Level (LpA) : 99 dB (A) Dimensions: 663 x 240 x 406 mm Net Weight: 5.8 kg (6.7 - 7.7 kg with battery)

GBP 439.99
1

Makita HS7100 Circular Saw without Riving Knife 1400W 110V - MAKHS7100L

Makita HS7100 Circular Saw without Riving Knife 1400W 110V - MAKHS7100L

The Makita HS7100 190mm Circular Saw has been developed as the successor to the 5705R. It features a compact and lightweight design without riving knife. It has an ergonomically designed soft grip covered with non-slip elastomer and a large ejection port. The single action lever allows the rip fence to be attached and removed easily, and there is a positive stop at 45. There is also a maximum cutting angle up to 50 and a precision bevel adjustment can be made at 45. Specifications: Input Power: 1, 400W. No Load Speed: 5, 500/min. Blade: 190 x 30mm Bore. Max. Cut: @90 67mm, @45 48.5mm, @50 43.5mm. Weight: 4.0kg.

GBP 204.99
1

Makita HP2051 13mm Percussion Drill 720W 240V MAKHP2051

Makita HP2051 13mm Percussion Drill 720W 240V MAKHP2051

The Makita HP2051 13mm Percussion Drill has an extra low vibration level for comfortable and less fatigue. It has a slim and smart design with a torque limiter and a variable speed trigger for superior control. The drill is equipped with a keyless drill chuck and 2 mechanical gears with a forward/reverse rotation. It is supplied with a side handle, depth stop and a carry case. Specifications: Input Power: 720W.No Load Speed: 0-1,200/0-2,900/min.Impact Rate: 0-24,000/0-58,000/bpm.Capacity: Steel 13mm, Wood 40mm, Masonry 20mm.Weight: 2.5kg. Vibration Drilling: 2.5 m/sec.Vibration Hammer Drilling: 13 m/sec.Vibration K Factor: 3 m/sec.Noise Sound Power: 108 dB(A).

GBP 199.99
1

Makita HP2070 2-Speed Percussion Drill 1010W 240V MAKHP2070

Makita HP2070 2-Speed Percussion Drill 1010W 240V MAKHP2070

The Makita HP2070 2-Speed Percussion Drill with a reversing system prevents the speed reduction of the motor in reverse rotation. There is a mechanical 2-speed, and electronic speed adjusting dial for presetting maximum speed. The torque limiter prevents damage. The drill stops when the bit hits against reinforcements. It is also fitted with a keyed chuck. It is supplied with a side handle, depth stop and a carry case. Specifications: Input Power: 1,010W.No Load Speed: 0-1,200/0-2,900/min.Impact Rate: 0-24,000/0-58,000/bpm.Capacity: Steel 18mm, Masonry 20mm, Wood 40mm.Weight: 2.4kg. Vibration Hammer Drilling: 16 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 99 dB(A).Noise Sound Power: 110 dB(A).Noise K Factor: 3 dB(A).

GBP 239.99
1

Makita GA5091 Slide Switch Angle Grinder 1900W 240V

Makita GA5091 Slide Switch Angle Grinder 1900W 240V

Makita GA5091 Slide Switch Angle Grinder with AFT (Active Feedback sensing Technology) turns the motor off if rotation speed suddenly slows or wheel is forced to stop. Variable speed control by dial, so you can easily match the speed to the task at hand. An anti-restart function minimises accidental start-up. The Super Joint System II helps to dampen vibrations, for less fatique during long work periods. For added safety there is a mechanical brake. Supplied with: 1 x A-80656 Grinding Wheel 125 x 6mm, 1 x Side Handle and 1 x Lock Nut Wrench.  Specifications: Input Power: 1900W.No Load Speed: 2,800-11,500/min.Disc Size: 125mm x 22.23mm Bore.Spindle Thread: M14.Power Supply Cord: 2.5m.Weight: 2.4kg.

GBP 224.99
1

HP2050F 13mm Percussion Drill with Job Light 720W 240V

HP2050F 13mm Percussion Drill with Job Light 720W 240V

The Makita HP2050F 13mm Percussion Drill has an extra low vibration level, for comfortable and less fatigue operation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is equipped with a keyed drill chuck. The two mechanical gears and variable speed trigger makes it ideal for various materials. This model also has an LED job light. It is supplied with a side handle, depth stop and a carry case. Specification Input Power 720 Watt. No Load Speed 0-1,200/0-2,900/min. Impact Rate 0-24,000/0-58,000/bpm. Capacity Steel 13mm, Masonry 20mm, Wood 40mm. Weight 2.5kg. Vibration Drilling 2.5 m/sec. Vibration Hammer Drilling 13 m/sec. Vibration K Factor 3 m/sec. Noise Sound Power 108 dB(A).

GBP 0.00
1

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

Makita HR4511C SDS Max AVT Rotary Demolition Hammer 1350W 240V MAKHR4511C

The Makita HR4511C SDS Max AVT Rotary Demolition Hammer has 2 modes of operation: Rotary Hammer and Hammer only. It is fitted with an anti-vibration system for ultra-low vibration. It is also fitted with a padded, spring loaded, hinged rubberised grip and comes with 2 side handles for increased control.The hammer has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recessed change lever mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly. The drill is double insulated for increased safety. Supplied with: 1 x Bit Grease, 1 x Depth Stop, 2 x Side Handles and 1 x Carry Case. Specifications: Input Power: 1,350W.No Load Speed: 130-280/min.Impact Rate: 1,250-2,750/bpm.Impact Energy: 9.4 Joules.Capacity: Concrete 45mm, TCT Core 125mm.Weight: 9.0kg. Vibration Chiselling : 7.0 m/sec.Vibration Hammer Drilling : 7.5 m/sec.

GBP 899.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 110V

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 599.99
1

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

Makita HR3210FCT SDS Plus Rotary Hammer Drill with QC Chuck 850W 240V MAKHR3210FCT

The Makita HR3210FCT SDS+ Rotary Hammer Drill with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Specifications: Input Power: 850 Watt.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 4.9 Joules.Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 619.99
1

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V MAKHR3210C

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drill s hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. It is supplied with; a side handle, depth stop, bit grease and a carry case. Input Power: 850W.No Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpm.Impact Energy: 5.0 joules.Capacity: Concrete 32mm, Core Diameter (TCT) 90mm.Weight: 4.9kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec.Vibration Chiselling: 7 m/sec.Vibration Hammer Drilling: 10 m/sec.Vibration K Factor: 1.5 m/sec.Noise Sound Pressure: 89 dB(A).Noise Sound Power: 100 dB(A).Noise K Factor: 3 dB(A).

GBP 539.99
1

Makita DHP485STX5 Brushless Combi Drill 18V 1 x 5.0Ah Li-ion + 101 Piece Bit Set

Makita DHP485STX5 Brushless Combi Drill 18V 1 x 5.0Ah Li-ion + 101 Piece Bit Set

DHP485STX5 Brushless Combi Drill 18V 1 x 5.0Ah Li-ion + 101 Piece Bit Set The Makita DHP485 BL Combi Drill has a brushless motor, two mechanical gears and a variable speed trigger. The drill is fitted with an ergonomic handle for increased comfort. Its single sleeve keyless chuck allows for easy bit installation/removal by one hand. Supplied with: 1 x 18V 5.0Ah Li-ion Battery and 1 x DC18SD 18V Charger. The 101 Piece Bit Set contains the following: 13 x Nutdrivers, 4 x Drill Stop, 1 x Hex key, 2 x Screw Holders, 1 x Centre Punch, 1 x Counter Sink, 6 x Brad Point Drills, 6 x HSS Drills, 6 x Masonry Drills, 3 x Flat Bits, 5 x Hole Saws, 1 x Bit Driver Handle, 1 x 8in Aluminium Spirit Level, 30 x 25mm Screwdriver Bits, 20 x 50mm Screwdriver Bits and 1 x 60mm Magnetic Bit Holder Specification: No Load Speed: 0-500/0-1, 900/min. Impact Rate: 0-7, 500/0-28, 500/bpm. Max. Torque: 50Nm. Torque Settings: 21 + Drill. Capacity: Wood 38mm, Masonry 13mm, Steel 13mm. Weight: 1.8kg. Technical Specs No Load Speed: 0-500/0-1, 900/min. Impact Rate: 0-7, 500/0-28, 500/bpm. Max. Torque: 50Nm. Torque Settings: 21 + Drill. Capacity: Wood 38mm, Masonry 13mm, Steel 13mm. Weight: 1.8kg.

GBP 539.99
1

Makita 9565PCV Angle Grinder 125MM 1400W Paddle Switch 240V

Makita 9565PCV Angle Grinder 125MM 1400W Paddle Switch 240V

Choose the best speed suited to the application with this Variable Speed Angle Grinder from Makita Powerful 13.0 AMP motor delivers more output and variable (2, 800 - 10, 500) RPM The Makita 9565PCV features SJS technology which is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop. On the rear of the machine is a variable speed control dial giving much more control and enabling the user to match the speed to the application. Constant speed control automatically applies additional power to the motor to maintain speed under load. Soft start suppresses start-up reaction for smooth start-ups and longer gear life. Electronic current limiter helps protect the motor from overload. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Slide switch with lock-on setting for continuous use. "Tool-less" wheel guard adjustment for easy adjustment. Zig-zag varnish protects the armature coil from dust and debris for longer tool life Features: High power 1400w anti-dust motor Ideal for prolonged use in demading applications Variable speed trigger Soft start Constant speed under load Double insulated for added safety Comes with: Lock Nut Lock Nut Wrench Inner Flange AVT Side Grip Wheel Guard Specification: Wheel size: 125mm Bore Size: 22mm No Load Speed: 2800-11000rpm Input Wattage: 1400w Spindle Size: M14 x 2mm Net Weight: 1.8Kgs

GBP 189.99
1

DHP485STX5 18V LXT Combi Drill Bl (1 x 5AH)

DHP485STX5 18V LXT Combi Drill Bl (1 x 5AH)

Makita DHP485STX5 18V Combi Drill with 101 Piece Accessory Set (1 x 5.0Ah Battery) The Makita DHP485STX5 is a cordless combi drill and accessory set. This set is perfect for a variety of applications to suit any trade. The Makita DHP485 features a single sleeve keyless chuck which allows for easy bit installation and removal using only one hand and the ergonomic soft grip provides great comfort. The fully brushless motor ensures maximum power and the built-in LED job light allows for precision even in dark, hard to reach areas. Features: 2 mechanical gears Brushless motor Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Electric brake for precision work Ergonomic handle for drill-driver applications Comes With: 1 x BL1850B 5.0Ah Battery 1 x DC18SD Charger 101 Piece Accessory Set Carry Case Specification: Capacity in Steel: 13 mm No Load Speed (Lo) : 0 - 500 rpm No Load Speed (Hi) : 0 - 1, 900 rpm Capacity in Masonry: 13 mm Chuck Capacity: 1.5 - 13 mm Blows per Minute (Hi) - ipm: 0 - 28, 500 ipm Blows per Minute (Lo) - ipm: 0 - 7, 500 ipm Capacity in Wood: 38 mm Voltage: 18 v Torque Settings: 21 + drill Battery Type: Lithium-ion Vibration K factor: 1.5 m/sec Noise sound pressure: 82 dB (A) Noise sound power: 93 dB (A) Net weight: 1.5 - 1.8 kg Battery Quantity: 1 x 5.0Ah Max. Fastening Torque (Soft Joint) : 27 Nm Max. Fastening Torque (Hard Joint) : 50 Nm Vibration (Impact drilling into concrete) : 8.0 m/sec Vibration (Drilling into metal) : 2.5 m/sec Accessory Set Contains: 13 x Nutdrivers 4 x Drill Stop 1 x Hex key 2 x Screw Holders 1 x Center Punch 1 x Counter Sink 6 x Brad Point Drills 6 x HSS Drills 6 x Masonry Drills 3 x Flat Bits 5 x Hole Saws 1 x Bit Driver Handle 1 x 8" Aluminium Spirit Level 30 x 25mm Screwdriver Bits 20 x 50mm Screwdriver Bits 1 x 60mm Magnetic Bit Holder

GBP 0.00
1

Makita DHR242RTJW 18V SDS+ Hammer Drill with DX06 Dust Extraction (2 x 5.0AH Batteries)

Makita DHR242RTJW 18V SDS+ Hammer Drill with DX06 Dust Extraction (2 x 5.0AH Batteries)

Makita DHR242RTJW 18V Brushless 3-Mode SDS+ Rotary Hammer Drill 24mm with DX06 Dust Extraction (2 x 5.0Ah Batteries) The Makita DHR242RTJ is a high-performance cordless combination hammer designed for the toughest drilling tasks. With 3 different drilling modes - Rotation + Hammering, Hammering only & Rotation only - for you to choose from depending on your application. You can expect longer runtime and higher power output than other models thanks to its fully brushless motor. It is also Makitas first Cordless Combination Hammers with a Dust Extraction System the DX06 which is included. This means that the job site will remain clean, safe and free from dust. It well and truly is an all-round must-have tool for any tradesman. DHR242 Features: Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model DHR200 One touch slide chuck for SDS-plus bit Easy-to-grip handle ergonomically designed to give maximum power thrust, a sure and comfortable grip in any operation and overhead application, drilling with palm-up or palm-down grip 3 mode operation Rotation + Hammering Hammering only Rotation only The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers Higher productivity than model DHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact DX06 Features: One touch easy attachment/removal Transparent dust case Filter cleaning mechanism Depth Gauge Large dust box cover Comes With: DX06 Dust Extraction System 2 x BL1850B Batteries DC18RC Charger Makpac Connector Case (TYPE 4) Depth Stop Side Handle DHR242 Specification: Max in Steel: 13mm Max in Wood: 27mm Max in Concrete: 24mm No Load Speed: 0-950rpm Blows per minute: 0-4,700bpm Single impact energy: 2.0J Vibration: 15/sec2

GBP 519.99
1

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

Makita DLX3049PTJ 18/36V 3 Piece Cordless Kit (4 x 5.0Ah Batteries

This 3 piece tool kit from Makita contains a range of must-have tools for the professional trade The Makita DLX3049PTJ comes with the DHR264 Twin 18V SDS+ Rotary Hammer and the DHS710 Twin 18V Circular Saw which both accept 2 x 18V batteries making them a 36 volt cordless machine with bags and bags of power. The kit also comes with the DTD146 Impact Driver, Twin battery charger and 3 x MakPac carry cases. Contents:DHR264 twin 18V SDS+ Rotary HammerDHS710 twin 18V Circular SawDTD152 18V Impact DriverDC18RD Twin Port Battery Charger4 x BL1850 18V 5Ah Batteries2 x Type 4 MakPac Carry Cases1 x Type 3 MakPac Carry Case DHR 264 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact design that maintains the same easy handling and high manoeuvrability as the BHR262. LED Job light with pre-glow and afterglow functions 3 mode operation - Rotation + Hammering - Hammering only - Rotation only When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty. With Quick Change Chuck Ergonomic soft grip. Battery capacity warning lamp. 40 different bit-angle settings. DHS710 Features: Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. Compact and lightweight design. Rear dust exhaust port Same depth of cut as HS7100. Durable but lightweight magnesium die-cast blade case and safety cover. Blower function to clear wood dust from cutting line. DTD152 Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit All metal gears Comes With: 4 x 5.0Ah Batteries DC18RD twin Charger 3 x Makpac Carry Cases DHR264 - Side Handle, Depth Stop, Extra Chuck 194079-2, 100ml Grease, Cloth DHS710 - Saw Blade, Hex Wrench, Rip Fence and Dust Nozzle Specification: DHR264 SDS+ Rotary Hammer: Battery type: Lithium ion Battery voltage: 2 x 18V Max. in steel: 13mm Max. in wood: 32mm Max in concrete: 26mm No load speed: 0-1,200 rpm Impacts per minute: 0-4,800bpm Chuck type: SDS plus (quick change) Operation modes: 3 modes Net weight: 4.7kg DHS710 Circular Saw: Battery type: Lithium ion Battery voltage: 2 x 18V Blade size: 190mm Bore size: 20mm Max at 0: 66mm Max at 45: 49mm Max at 50: 44mm No load speed: 4600rpm Electric brake: Yes Soft start: Yes Net weight: 4.7kg DTD152 Impact Driver: Battery Type Li-ion Voltage: 18V Driving Shank: 6.35mm (1/4 in Hex) Machine Screw: M4 - M8 Standard Bolt: M5 - M16 Coarse Thread: 22 - 125mm Impacts Per Minute: 0 - 3500 ipm No Load Speed Hi: 0 - 2900 rpm Max Tightening Torque 165 Nm Sound Pressure: 93 dB(A) Sound Power: 104 dB(A) Sound K Factor: 3 dB(A) Vibration: 10.5 m/s2 Vibration K Factor: 1.5 m/s2 Weight 1.5kg

GBP 0.00
1