KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Solo 108 Fibreglass 2 Section Telescopic Pole 2.5 metres

Solo 108 Fibreglass 2 Section Telescopic Pole 2.5 metresThe Solo 108 telescopic pole extends from 1.26m to 2.5m in 2 sections allowing access to detectors up to 4m.Made from strengthened durable fibreglassLightweight and portableTotalock system ensures sections lock easily and never twistSuits all Solo toolsTools simply slide into top of pole and are released by a buttonDrastically reduces time required for testingNon conductiveUltimate quality - a total solutionDesigned for quick and reliable use - every time

GBP 304.21

1

Solo 810 Smoke Detector Test Starter Kit 2.5 metres

Solo 810 Smoke Detector Test Starter Kit 2.5 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 810 is a starter pack for testing smoke detectors at normal ceiling height. The kit contains1 Solo 330 Aerosol Smoke Dispenser1 Solo 101 1.13m Fibreglass Extension Pole1 Solo A10 Aerosol 150ml non-flammable

GBP 451.84

1

810 Plus Engineer Starter Testing Kit 2.5 Metres

810 Plus Engineer Testing Kit 2.5 MetresSolo 810 - Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available. Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.ACT 612 - Simulates a full 20 hour battery discharge test in seconds. The ACT612 is a dual voltage intelligent battery tester designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour Ah calibration control enabling Ah readings to be adjusted to suit various battery technologies including standby SLA AGM cyclic GEL and car FLOODED WET batteries. Not manufactured by No Climb products.Call Point Test Set - The call point key set is an essential must have for every fire alarm engineer on site who work alongside a wide variety of call points so you wont be left in the dark on that all-important job. Our key set has been designed to include the most common call point test keys used in a wide range of different fire alarm systems which have been installed into buildings all around the world. Not manufactured by No Climb products.Kit Contains1 x Solo 330 Aerosol Smoke Dispenser1 x Solo 101 1.13m Fibreglass Extension Pole1 x Solo A10 Aerosol 150ml non-flammable1 x ACT 612v Intelligent Battery Tester Not manufactured by No Climb products.1 x Call Point Test Key Set Not manufactured by No Climb products.Call Point Test Key Set Contains1 x KAC Standard Manual Call Point Key1 x Gent SMS S4-34899 Vigilon S-Quad Fire Alarm Manual Call Point Key1 x Gent SMS 14112-12 Old Style Gent Call Point Key1 x Menvier MFBGKEY3 Key for New Style Menvier Call Points1 x Menvier MFBGKEY2 Key for Old Style Menvier Call Points1 x Apollo 44251-176APO Key for New Style Apollo Manual Call Points1 x Fike 45-0022-S Manual Call Point Test Key1 x Howler CPK02 Pin Style Call Point Test Key1 x Aico STI Nittan MCPSK2 Spare Key for Call Points

GBP 669.40

1

Testifire XTR2 TESTIFIRE-USBC-001 USB-C to USB-C Cable

Testifire XTR2 TESTIFIRE-USBC-001 USB-C to USB-C CableTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesA USB-C to USB-C cable for use with the Testifier XTR2

GBP 24.47

1

Solo 808 Smoke Detector Test Starter Kit 4 metres

Solo 808 Smoke Detector Test Starter Kit 4 metresSolo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit a universal smoke testing kit or an all encompassing kit including a heat detector tester there is one available.Larger kits are supplied with a purpose designed carry -bag storage case which holds all the tools an engineer needs for testing - not just practical but also giving a professional image when arriving on site.The Solo 808 is a starter pack for testing smoke detectors up to 4m high. The kit contains1 Solo 330 Aerosol Smoke Dispenser1 Solo 108 2 Section Telescopic Pole 2.5 metres1 Solo A10 Aerosols 150ml non-flammable

GBP 603.61

1

Testifire TESTIFIRE25-001 Spare Remote

Testifire TESTIFIRE25-001 Spare RemoteGeneration of test stimuli starts when Testifire is positioned over a detector and the infrared beam within the transparent cup is interrupted. Certain detectors such as those with virtual chambers have no physical features to cause stimuli generation to start. The Optional Testifire 25 Infrared Remote Control can be used to initiate the test procedure in such situations.The Remote control is operated by aiming the LED towards Testifire when it is at height and the control button is used to startstop a test andor move on to the next test in the sequence.

GBP 139.67

1

Solo C3 CO Detector Test Gas Canister 250ml

Solo C3 CO Detector Test Gas Canister Designed for functional testing of detector testers the Solo C3 Aerosol ensures that detectors that respond to smoke are in full working order. Non-flammable this product is the professionals choice for value in aerosol smoke.Carbon Monoxide CO detectors operate by using an electrochemical cell which is able to detect CO in the atmosphere and is set at a predetermined threshold. The only way to correctly test a CO detector is to introduce CO safely to the sensor from the outside demonstrating free flow from the atmosphere to the sensor.The CO contained within the Solo C3 CO canister is at a level which poses no threat to the user when used correctly. Solo CO is formulated for use with the Solo 330 Dispenser. This prevents dissipation of the CO which would occur if used handheld.CO detectors are less common that smoke and heat detectors however when installed they still need to be tested. With all our products we pride ourselves on offering genuine choice and CO testing is no different.The need for carbon monoxide testers has increased in recent years thanks to widespread media coverage focusing on the danger of CO often referred to as the silent killer. More and more domestic properties including rentals now have carbon monoxide alarms installed and these too should be tested.Key FeaturesDetector manufacturer endorsedNon-flammable CO stimulusEnables controlled delivery over short burstsCompatible with Solo 330332 dispenserPlease note Due to the nature of the contents it is usual for this can to feel very light as stated on the back of the can.

GBP 22.50

1

Solo 612 Urban Pole Bag

Solo 612 Urban Pole BagThe SOLO612-001 is a Solo Urban Pole Bag which is suitable for holding up to 4 urban Solo poles.Key Features62cm pole bagDesigned to hold Solo poles securely with Solo 611 Urban backpackSecured with adjustable clipsDesigned to hold 1 x Solo 110 3 x Solo 111Professional design with the Solo logo

GBP 33.52

1

Solo Spare 727 High Capacity Car Charger and 220 240v Mains

Please note This product now features backwards compatibility and is able to charge SOLO760-001 and SOLO770-001 battery batons.Solo Spare 727 High Capacity Car Charger and 220 240v MainsThe Solo727 charger provides the same functionality as before enabling fast charging of Battery Batons from both mains power and in-vehicle outlets. Each charger and battery combination is designed and certified to give a 60-90 minutes charge time i.e. Solo726 charges Solo760 batons and Solo727 charges Solo770 batons.To help match the battery to the charger a red sleeve has been added to the Solo727 Charger on the battery lead which corresponds to a red collar on the top of the Solo770 battery baton.

GBP 203.36

1

Solo 100 Fibreglass 4 Section Telescopic Pole 4.5 metres

Solo 100 Fibreglass4 SectionPole 4.5 MetresSolo 100 telescopic pole extends from 1.26m to 4.5m in 4 sections allowing access to detectors fitted up to 6m. Height can be increased by using the Solo 101 1.13m extension poles to a max detector height of 9m.Made from strengthened durable fibreglassLightweight and portableTotalock system ensures sections lock and never twistSuits all Solo toolsTools simply slide into top of pole and are released by a buttonDrastically reduces time required for testingNon conductiveUltimate quality - a total solutionDesigned for quick and reliable use - every time

GBP 603.22

1

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001What is ScorpionScorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point for use with the NEW Engineers Portable Controller which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activation.Key FeaturesSmoke generation tailored for functional testing of point type smoke detectorsAdjustable smoke time to suit characteristics of system under testClearing function enables quicker reset and reduced repeat alarmsIn excess of 240 tests of 15 seconds per Scorpion Head UnitSuitable detector types Optical photoelectric IonizationBenign particulate avoids material contaminationConsistent repeatable stimulus from one test to the nextApproved by world-leading detector manufacturersThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situationsTrue functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.Kit Includes1 x SCORP 10011 x SCORP 25

GBP 673.33

1

Scorpion 8000 Control Panel SCORP8000

Scorpion 8000 Control Panel SCORP8000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 914.99

1

Scorpion 25 Access Point SCORP25

Scorpion 25 Access Point SCORP25Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree Approvals Scorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 136.62

1

Scorpion 2001 Aspiration Smoke Detection ASD Unit with Fixings SCORP2001

Scorpion 2001 Aspiration Smoke Detection ASD Unit SCORP2001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Scorpion 7000 Portable Controller SCORP7000

Scorpion 7000 Portable Controller SCORP7000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 1260.83

1

Scorpion 1001 Point Head Unit with Fixings SCORP1001

Scorpion 1001 Point Head Unit SCORP1001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Solo 110 Urban Telescopic Pole 1.75 Metres

Solo 110 Urban Telescopic Pole 1.75 MetresThe Solo 110 Access Pole offers safe access to detectors installed at heights of up to 3 metres. Solo poles should always be held vertically when raising or lowering. Ensure that all extension poles and test tool buttons are locked into position before extension and use. The maximum working height using Solo 110 Solo 111 poles is 4.5 metres for Solo and Testifire. This is achieved using 1 x Solo 110 telescopic pole and a maximum of 3 x Solo 111 extension poles. It is recommended to stand directly under the detector.Key FeaturesExtends to 1.75 metres to provide maximum reach of 3 metresCan be used with up to 3 Solo 111 extension polesPull-wound glass fibre constructionDesigned certified non-conductiveSimple locking mechanismCompatible with the Solo 612 Pole BagUrban telescopic and extension poles are half the length of conventional poles

GBP 610.40

1

Solo 372 Adaptor for Testing ASD Test Points

Solo 372 Adaptor for Testing ASD Test PointsThe Solo 372 works by replacing the clear cup on the Solo 365 and the design of the adapter allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.

GBP 141.05

1

No Climb SoloC6-001 CO Test Aerosol Non-Flammable

No Climb SoloC6-001 CO Test Aerosol Non-FlammableDesigned for use with domestic carbon monoxide CO detectors the Solo C6 is a hand-held tester spray that does not require specialist equipment such as dispensers. It is supplied with an applicator straw which introduces CO to the detector sensor in a controlled manner.For use with straw provided to directly test CO alarms.Key FeaturesFor testing domestic carbon monoxide detectorsHand-held - no need for specialist dispensing equipmentSupplied complete with applicator strawIntroduces CO to the detector sensor in a controlled mannerContents approx. 4 litresNon-flammable compressed gasDue to the nature of the contents the aerosol feels very lightweight

GBP 30.32

1

Solo 330 Aerosol Smoke and CO Dispenser

Solo 330 Aerosol Smoke and CO DispenserThe Solo 330 smokeCO dispenser with its injection-moulded construction and swing frame make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights of up to 9 metres Using the SOLO100-001 Pole. Ergonomically designed for optimum use with the Solo Aerosol range together offering fully controlled and efficient testing. The Solo 330 is for use when testing detectors of up to 100mm in diameter.Robust - to withstand the rigours of everyday useStrength and durability - to ensure long lifeInjection-moulded plastic design - minimises weightSpring loaded mechanism - effective areosol deliveryDispenser and diaphram contain particles - conserves aerosolAerosol spray not directed at detector - sensor not swampedTouch sensitive - ideal for suspended ceilingsUniversal - suits most detectors from normal height to 9 metresClear cup and diaphram - allows view of detector LEDInterchangeable with all other Solo Tools

GBP 346.99

1

Solo A10S Smoke Detector Test Gas Canister 250ml Non-Flammable

Solo A10S Smoke Detector Test Gas Canister 250ml Non-FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the every day tester. If a flammable solution is essential there is the Solo A5.The Solo A10S due to its 250ml bottle size fits directly into the Solo 330332 but can also be used as a hand-held gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment.Key FeaturesDetector manufacturer approvedDesigned for use with Solo 330332 dispenserCompliant with regulationsUL certified

GBP 35.40

1

Solo A10 Smoke Detector Test Gas Canister 150ml Non-Flammable

Solo A10 Smoke Detector Test Gas Canister 150ml Non-FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the every day tester. If a flammable solution is essential there is the Solo A5.The Solo A10 is available in a 150ml bottle and can be used as a hand-held test gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3 stock already produced can still be used and a limited quantity can be bought from us while stock lasts.What No Climb products are affectedThe new regulations mean that Solo A3 Solo A7 Aero 300 Chekkit Smoke gas canisters will be phased out.When will they be phased outThe manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017 however we do still have very limited stock of these products but once theyre all gone we will not be ordering any surplus stock up please Contact Us to find out more.Will They be replacedTwo aerosols are being brought out Solo A5 and Solo A10 which can be used in the Solo 330 dispensers both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version which will be suitable for replacing the Aero 300 hand-held smoke gas canister alternatively the SmokeSabre will also be a relevant replacement. Unfortunately the Solo A7 detector air duster is not going to have a replacement.

GBP 22.20

1

Solo 425 5m Additional Extension Cable for Mains Heat Detector Tester

Solo 425 5m Additional Extension Cable for Mains Heat Detector TesterThe Solo 425 is a 5m Additional Extension Cable for the Solo 423424 Mains Powered Heat Detector Tester to extend the reach of the unit. These leads can be joined together to extend the range further in 5m sections.

GBP 100.12

1

Solo A5 Smoke Detector Test Gas Canister 250ml Flammable

Solo A5 Smoke Detector Test Gas Canister 250ml FlammableThe new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A5 is positioned very much as the every day tester. If a non-flammable solution is essential there is the Solo A10.The Solo A5 fits directly into the Solo 330332 but can also be used as a hand-held test gas canister. Test gas works by delivering smoke particles to the detector under test replicating the conditions of smoke from a fire in a safe and clean manner.Solo A5 and Solo A10 have been created to use different gasses to the Solo A3 this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3 stock already produced can still be used and a limited quantity can be bought from us while stock lasts.What No Climb products are affectedThe new regulations mean that Solo A3 Solo A7 Aero 300 Chekkit Smoke gas canisters will be phased out.When will they be phased outThe manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017 however we do still have very limited stock of these products but once theyre all gone we will not be ordering any surplus stock up please Contact Us to find out more.Key FeaturesDetector manufacturer approvedDesigned for use with Solo 330332 dispenserCompliant with regulationsUL certified

GBP 20.28

1

TS3-001 Testifire Smoke Capsule

TS3-001 Testifire Smoke CapsuleTestifire generates its nontoxic smoke stimulus from a specially formulated fluid supplied in a replaceable non-pressurised capsule. The number of tests from a capsule is dictated by the response time of the detectors under test and can range between 500 and 1000 tests. Although there is much more to the comparison than material cost typically this equates to between two and five times that produced by an aerosol.Key FeaturesNon-pressurised easier to store and transportOn-demand smoke generation less wastage more testsSmoke stimulus which is compatible with widest range of detectors

GBP 82.50

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)