Prochem C503 Proshine 2 x 5 Litre
Prochem C503 Proshine is a high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings. High solids metallised emulsion floor polish.
- High gloss, self-shining finish for a long lasting slip resistant shine. - Two or three thin coats recommended for best results. - White emulsion with acrylic odour. - Coverage approx. 250m2 per 5 litres per coat.
Directions - For professional and industrial use only. - Proshine is ready-to-use. Do not dilute with water. - Do not shake container. - Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal. - Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply. - Coverage is approximately 250 m2 per 5L per coat. - Allow final coat to dry completely before re-use. Do not buff floor at this stage. - Periodically the floor gloss can be maintained by spray buffing with Protreat. - Keep from freezing.
pH Values - pH Concentrate: 9.0 - pH Diluted: Not applicable
