76 results (0,14589 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

6x Watco Heavy Duty Line Marking Tape 100mm X 30M Red XHDLMT100R

6x Watco Heavy Duty Line Marking Tape 100mm X 30M Red XHDLMT100R

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1979.94
1

Watco Heavy Duty Line Marking Tape 50mm X 30M Red

Watco Heavy Duty Line Marking Tape 50mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 179.99
1

Watco Heavy Duty Line Marking Tape 100mm X 30M Red

Watco Heavy Duty Line Marking Tape 100mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 359.99
1

6x Watco Heavy Duty Line Marking Tape 75mm X 30M Red XHDLMT75RED

6x Watco Heavy Duty Line Marking Tape 75mm X 30M Red XHDLMT75RED

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1499.94
1

6x Watco Heavy Duty Line Marking Tape 50mm X 30M Red XHDLMT50R

6x Watco Heavy Duty Line Marking Tape 50mm X 30M Red XHDLMT50R

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 1019.94
1

Watco Heavy Duty Line Marking Tape 75mm X 30M Red

Watco Heavy Duty Line Marking Tape 75mm X 30M Red

Images for illustration purposes onlyLine marking tape is hard wearing and durable. Made from 1mm thick PVC with chamfered edges to reduce scuffing and lifting. High performance self adhesive backing is coated edge to edge to reduce any edge lift. Easy to clean and is quick and simple to apply by hand.FeaturesQuick and simple to apply by handHard wearing and durableMade from 1mm thick PVC with chamfered edges to reduce scuffing and liftingHigh performance self adhesive backingThe adhesive is coated edge to edge to reduce any edge liftEasy to cleanThe photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to 30 minutes with a yellow/green colour, showing safe exit routes or hazardous areas.

GBP 279.99
1

Watco Stair Nosing 56mm X 32mm X 1.22m Red

Watco Stair Nosing 56mm X 32mm X 1.22m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 53.99
1

Watco Stair Nosing 56mm X 32mm X 2.46m Red

Watco Stair Nosing 56mm X 32mm X 2.46m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 92.99
1

Watco Stair Nosing 66mm X 32mm X 1.22m Red

Watco Stair Nosing 66mm X 32mm X 1.22m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 56.99
1

Watco Stair Nosing 66mm X 32mm X 2.46m Red

Watco Stair Nosing 66mm X 32mm X 2.46m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 89.99
1

Watco Stair Nosing 85mm X 32mm X 1.22m Red

Watco Stair Nosing 85mm X 32mm X 1.22m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 79.99
1

Watco Stair Nosing 85mm X 32mm X 2.46m Red

Watco Stair Nosing 85mm X 32mm X 2.46m Red

Images for illustration purposes onlyThese products are cut to order so unfortunately cannot be returned.Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours.FeaturesSimply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixingsIdeal when minor damage to step edges requires recoveringSuited to light traffic areasFor exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test ValuesDry PTV Wet PTV62 Low slip potential 51 Low slip potential

GBP 119.99
1

Watco Stair Nosing Infill Red

Watco Stair Nosing Infill Red

Images for illustration purposes only These products are cut to order so unfortunately cannot be returned. Aluminium stair nosing with a coloured infill of matt PVC. Available with a choice of different colours. Features Simply drill and screw the nosing to the step edge then fix the self adhesive PVC strip to conceal the fixings Ideal when minor damage to step edges requires recovering Suited to light traffic areas For exterior applications, please see Watco Aluminium Nosing or Watco Firm-Step Edge. Pendulum Slip Test Values Dry PTV Wet PTV 62 Low slip potential 51 Low slip potential

GBP 13.99
1

Watco Chemi-Coat Rapid Tile Red, 4L

Watco Chemi-Coat Rapid Tile Red, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Interlocking Flooring Flat Red 7mm X 500mm X 500mm

Watco Interlocking Flooring Flat Red 7mm X 500mm X 500mm

Images for illustration purposes onlyWatco Interlocking Flooring tiles are the ideal solution for covering damaged floor surfaces, where repair can be impractical and expensive. Each tile in the Watco range are simply laid on the surface and tapped into place using a rubber mallet. As no glue is required tiles can easily be moved or replaced at little expense. Watco Interlocking Flooring tiles are manufactured from highly durable PVC to the highest quality standards and are available in a variety of styles, finishes and colours to meet your requirements.Recommended areas of usePVC floor tiles are ideal for weak or contaminated surfaces which cannot be adequately cleaned or receive a coatingWatco Interlocking Flooring FeaturesSuitable for floors that require regular access to the sub-floor and are subject to impact, abrasion or vibrationQuick and simple to install, no gluing required, simply tap into place with a rubber malletOnce fitted, the tiles can be lifted, replaced and transported as requiredEnvironmentally friendly, high recycled PVC contentResistant to chemicals, oils and solventsEdge ramps and corner pieces are also available to reduce trip hazardsFlat design suitable for vehicular traffic. Raised disc design suitable for pedestrian traffic.Please note, the price indicated is per individual tile

GBP 44.99
1

Watco Interlocking Flooring Edge Ramp Red

Watco Interlocking Flooring Edge Ramp Red

Images for illustration purposes onlyWatco Interlocking Flooring tiles are the ideal solution for covering damaged floor surfaces, where repair can be impractical and expensive. Each tile in the Watco range are simply laid on the surface and tapped into place using a rubber mallet. As no glue is required tiles can easily be moved or replaced at little expense. Watco Interlocking Flooring tiles are manufactured from highly durable PVC to the highest quality standards and are available in a variety of styles, finishes and colours to meet your requirements.Recommended areas of usePVC floor tiles are ideal for weak or contaminated surfaces which cannot be adequately cleaned or receive a coatingWatco Interlocking Flooring FeaturesSuitable for floors that require regular access to the sub-floor and are subject to impact, abrasion or vibrationQuick and simple to install, no gluing required, simply tap into place with a rubber malletOnce fitted, the tiles can be lifted, replaced and transported as requiredEnvironmentally friendly, high recycled PVC contentResistant to chemicals, oils and solventsEdge ramps and corner pieces are also available to reduce trip hazardsFlat design suitable for vehicular traffic. Raised disc design suitable for pedestrian traffic.Please note, the price indicated is per individual tile

GBP 19.99
1

Watco Interlocking Flooring Edge Ramp + Corner Red

Watco Interlocking Flooring Edge Ramp + Corner Red

Images for illustration purposes onlyWatco Interlocking Flooring tiles are the ideal solution for covering damaged floor surfaces, where repair can be impractical and expensive. Each tile in the Watco range are simply laid on the surface and tapped into place using a rubber mallet. As no glue is required tiles can easily be moved or replaced at little expense. Watco Interlocking Flooring tiles are manufactured from highly durable PVC to the highest quality standards and are available in a variety of styles, finishes and colours to meet your requirements.Recommended areas of usePVC floor tiles are ideal for weak or contaminated surfaces which cannot be adequately cleaned or receive a coatingWatco Interlocking Flooring FeaturesSuitable for floors that require regular access to the sub-floor and are subject to impact, abrasion or vibrationQuick and simple to install, no gluing required, simply tap into place with a rubber malletOnce fitted, the tiles can be lifted, replaced and transported as requiredEnvironmentally friendly, high recycled PVC contentResistant to chemicals, oils and solventsEdge ramps and corner pieces are also available to reduce trip hazardsFlat design suitable for vehicular traffic. Raised disc design suitable for pedestrian traffic.Please note, the price indicated is per individual tile

GBP 23.99
1

6x Watco Epoxy Matt Coat Tile Red Emcbefraltrd

6x Watco Epoxy Matt Coat Tile Red Emcbefraltrd

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1379.94
1

Watco Epoxy Matt Coat Pure Red

Watco Epoxy Matt Coat Pure Red

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Safety Coat Coarse Pure Red

Watco Safety Coat Coarse Pure Red

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

6x Watco Safety Coat Coarse Pure Red SCOATCRSBEFRAL3028

6x Watco Safety Coat Coarse Pure Red SCOATCRSBEFRAL3028

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1679.94
1