KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Carrier 584503-W Wireless SHATTERPRO 3V Glassbreak Sensor

Carrier 584503-W Wireless SHATTERPRO 3V Glassbreak SensorA wireless SHATTERPRO 3V Glassbreak Sensor.Key Features7.5m radius range

GBP 62.54

1

STI STI-CKE-015 EuroStopper Sounder Kit - Relay Including Relay Cable

STI STI-CKE-015 EuroStopper Sounder Kit - Relay Including Relay CableThe STI-CKE-015 is for use with the following modelsSTI-15020MLSTI-15C20MLSTI-15D20MLUpon activation the Euro Stopper sounder relay cartridge will emit a localised 96 dB alarm powered by a 3V lithium battery included. The relay facility will send a triggering signal to an additional panel or beacon. The cartridge is also supplied with a service pin.The STI-CKE-015 can also be used to upgrade the following modelsSTI-15010MLSTI-15C10MLSTI-15D10MLKey FeaturesPowered by a 3v lithium battery96dB alarmDirect replacementSupplied with service pin

GBP 60.12

1

Commander CB-Li-002-LFX Lithium-ion Battery Fire Extinguisher Double Cabinet

Commander CB-Li-002-LFX Lithium-ion Battery Fire Extinguisher Double CabinetProtect your fire extinguishers from accidental damage and have peace of mind theyre stored safely with this sturdy cabinet. It houses two fire extinguishers and ensures theyre well protected against harsh weather conditions scuffs knocks and bumps. Constructed with Polypropylene the Commander Cabinet is fully weather sealed resistant to UV and chemicals and its internal innovative clamp and strap system firmly holds extinguishers in place.

GBP 71.10

1

STI STI-CKE-015-WIR EuroStopper Sounder Kit - Wireless - including relay cable LIMITED

STI STI-CKE-015-WIR EuroStopper Sounder Kit - Wireless - including relay cable LIMITEDUpon activation when fitted with the Euro Stopper sounder wireless relay cartridge will emit a localised 96 dB alarm powered by a 3V lithium battery included. The relay facility will send a triggering signal to an additional panel or beacon and the wireless technology will trigger an STI receiver providing a visual and audible indication remotely. The cartridge is also supplied with a service pin.Key FeaturesNB STI wireless receiver sold separately.

GBP 85.88

1

Aico EI660i Multi-Sensor Fire Alarm With 10 Year Lithium Cells With AudioLINK

Aico EI660i Multi-Sensor Fire Alarm With 10 Year LithiumCells With AudioLINKThe Ei660i is a battery-powered Multi-Sensor Fire Alarmcontaining two proven reliable sensors Optical and Heat. The intelligentalarm software actively monitors both sensors allowing them to work togetherand provide total fire coverage.The Ei660i Multi Sensor Fire Alarm uses Optical and Heatsensors to detect all fire types with an increased resistance to false alarms.Its ability to respond quickly to both fast flaming and smouldering firessimplifies alarm choice for the designated roomsareas including the hallwaylanding living room dining room bedroom and loft spaces.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in AudioLINK technologyBuilt-in dust compensation technologyTwist on base with an anti-tamper locking optionGrade F1 and kitemarked to BS EN146042005 and BS5446-22003Easy to use large test button

GBP 61.51

1

STI STI-CKE-015-LIT EuroStopper Sounder Kit Lite

STI STI-CKE-015-LIT EuroStopper Sounder Kit LiteSTI-CKE-015-LIT EuroStopper Sounder Kit Lite is a replacement sounder cartridge for use with the STI EuroStopper cover range.Upon activation when fitted with the Euro Stopper sounder cartridge will emit a localised 96 dB alarm powered by a 3V lithium battery included. The cartridge is also supplied with a service pin.Key FeaturesThis product can be used as a replacement for a damagedfaulty sounder or used to upgrade non sounder versions so a unit with an integral sounder.NB Comes as standard with STI-15020ML STI-15C20ML and STI-15D20ML Euro Stopper Multi Kit.This version can be used as a replacement sounder for the following part codes-STI-15020MLSTI-15C20MLSTI-15D20MLOr it can be used to upgrade the following part codes to a version with integral sounder-STI-15010MLSTI-15C10MLSTI-15D10ML

GBP 48.29

1

Aico RadioLINK Alarm Controller Ei450

Aico RadioLINK Alarm Controller Ei450The Ei450 is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke heatand carbon monoxide alarms on the same system as its essential that you can tell which alarm has sounded. From then you can identifywhich danger is present and the action you should take.The Ei450 contains LEDs which clearly display which danger has activated the alarm helping to you take the appropriate action as quickly as possible.Control Switchs increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test Locate and Silencealarms in the systemTestThe alarm systemLocate The alarm that has been activatedSilence Any nuisance alarmsThe Ei450 is powered by a tamper proof sealed in lithium cell giving a completely wire free installation with a 10 year life and connects wirelessly usingRadioLINK interconnection technology so once in place you will need toHouse Codethe switch into the alarm system.Technical SpecificationSupply Voltage 3V Lithium Battery Powered for life.Battery Life 10 years normal operating conditions.Communication 868.499Mhz RadioLINK protocol.Fixing Wall mounting fixtures supplied.Operating Temperature 0C to 40C.Humidity Range 15 to 95 relative humidity.Button functionsTest Test alarms.Locate Identify triggered alarms.Silence Silence alarms.IndicatorsFire Illuminates when fire detected.CO Illuminates when CO detected.EOL illuminates to indicate End of Life.Memory Identifies previously triggered alarms.Diagnostics Walk round test Extended two minute test.Plastic Material UL94HB.Dimensions Product 90mm x 90mm x 30mm.Dimensions Boxed 153mm x 153mm x 40mm.Weight 110g product only 185g boxed.Guarantee 5 years.Approvals CE certified RF EN 300 220-2 EMC EN 301 489-1 EN 301 489-3 EMC.

GBP 85.26

1

Aico Plug-in RadioLINK module Ei200MRF

Aico Plug-in RadioLINK module Ei200MRFThe Ei200MRF is a module that fits into Ei208W battery Carbon Monoxide alarm so that the unit can use RadioLINK interconnection to link with other alarms. The module simply plugs into the designated slot in the base of the alarm head with flashing LEDs indicating that the module has been fitted correctly.As with other RadioLINK products the once the Ei200MRF module has been fittedthe alarmwill need to belinked into the alarm system or House Coded. View ourstep by step guide to House Coding here.Technical SpecificationSupply Voltage 3V lithium battery.RF frequency 868.499Mhz RadioLINK protocol.RF Power 10dBm.RF Protocol Proprietary RadioLINK using multi-path multi-repeater mesh architecture.RF Range 100 Meters in free air.System Size 12 RadioLINK devices max.Operating Temperature 0 to 40C. Storage 0 to 35C in a dry area.Humidity Range 15 to 95 relative humidity.IndicatorsBlue LED Typically RF transmission house code mode indicator code reset.Green LED Typically monitoring mode indicator alternating with blue LED to indicate monitoring success.Red LED Typically monitoring mode cancel alternating with blue LED to indicate monitoring failure.Dimensions Product 60mm x 30mm x 20mm.Weight 25g.Guarantee 5 years limited guarantee.Approvals CE certified EN 300220-2 Radio EN301489-3 EMC EN624792010 Safety.

GBP 74.56

1

Hyfire HFW-PB-01 Spare Primary Battery Pack of 10

Hyfire HFW-PB-01 Spare Primary Battery Pack of 10Replacement Primary Battery compatible with all Hyfire Field Devices. Acts as both primary and Secondary Cell when used with Hyfire Wireless Wall Sounders and Wall SounderBeacons Sold in Multiples of 10 units.Features Low Cost Lithium Technology Long Operational Life10 Year Shelf Life

GBP 46.42

1

Aico Switched Input Module Ei129

Aico Switched Input Module Ei129The Ei129 is a mains powered Switched Input Module with rechargeable lithium cell back up. It will triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.The Ei129 comes with a cover or can be mounted underneath an alarm.Operation of the Ei129When the volt-free contacts connected to the Switched Input Module are closed all interconnected smoke heat and CO alarms will sound.When the device triggering the Switched Input Module resets i.e. when the contacts switch back it will automatically reset and all interconnected alarms will cease sounding.Key FeaturesThis module triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.Mains powered with a rechargeable lithium cell back upConnects with the alarm system through a hard wire interconnectCompatible with the3000Ei2110e Multi-Sensor Fire Alarm160e Seies alarmsand the 140RC Series

GBP 46.00

1

Aico Ei3016 230v 3000 Series Optical Smoke Alarm

Aico Ei3016 230v 3000 Series Optical Smoke AlarmThe Ei3016 Optical Smoke Alarm contains a high-performance optical smoke sensor which is best for detecting slow smoldering fires. In addition the smoke chamber design integrated insect screen and unique automatic dust compensation reduce the risk of false alarms. The Ei3016 runs on 230V AC mains power. In the event of mains failure the 10 Year built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.The Ei3016 contains AudioLINK technology which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The Ei3016 self-checks its sensor battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes andor audible beeps. The memory feature allows an alarm that has previously activated to be easily identified through the red flashing LED.The alarm is fitted with a large Test Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm system to be silenced in the case of a false nuisance alarms and low battery fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.Key FeaturesContains a high-performance optical sensorMains powered with 10-year rechargeable Lithium cell back-upCompatible with interconnection and monitoring technologyAudioLINK TM Data extraction technologyDust compensation - unique self-monitoring mechanismEasi-Fit base10 Year lifeSensor Type OpticalSupply Voltage 230V AC 50HzPower Consumption 0.25W standbyBattery Back-up Rechargeable lithium cellsSound Level 85dBA at 3mButton Test Checks sensor electronics and sounderSilence Function Silences alarm for 10 minutesSilence Function Silences fault beeps for 12 hoursAudioLINK EnabledSmartLINK Compatible via the Ei3000MRF ModuleIndicator LEDS Green power. Red alarm silence mode memory. Yellow fault eventMemory Records last alarm eventFixing easi-fit base suppliedOperating Temperature -10C to 40CHumidity Range 15 to 95 relative humidityPlastic Material UL 94 V0 flame retardant

GBP 72.89

1

Aico Relay Module with 5A Relay amp Rechargeable Back-up Ei128RBU

Aico Relay Module with 5A Relay Rechargeable Back-up Ei128RBUThe Ei128RBU is a Relay Module that runs on a 230V AC mains power and has built-in tamper-proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable lithium cells are designed to have a 10-year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power.The Module has a set of Volt free contacts Normally Open and Normally Closed as standard but can be configured to give a 230V output or a 24V output using an external 24V supply.Any combination of30002110e160e 140RC or 260RC Series alarms can be used up to 12 including the Relay.The Module is designed to fit underneath any smoke or heat alarm. However a cover is supplied if there is a need for siting the unit remotely.The Module has additional trunking knock outs for ease of wiring.The Module can give a Continuous or pulse output. The pulse output will switch back the Relay contacts to their original state after 5 seconds operation.Operation of the Ei128RBUOn receiving a signal form the alarm system the Relay contacts will be operated causing a signal to be sent to the device to which it is connected.The Ei128RBU can be used to switch into a range of devices ranging from warden call systems to panel systems.When modified for a 230V or 24V output they can operate a range of different devices.The Module can be switched to give a pulse output or continuous output for different applications.Technical Specification The Relay is designed to operate whilst the alarm system is sounding to signal devices such as panels warden call systems nurse call systems etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.The Relay runs on 230V AC mains power and has built in tamper proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable Lithium cells are designed to have a 10 year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power. It operates on receipt of a signal form the interconnect line of a smoke heat or CO alarm.Volt-free contacts Normally Open or Normally Closed rated up to 240V AC 5 Amps making it suitable for use with a wide range of AC or DC voltages.Any combination of 3000 2110e 160e 140RC or 260RC smoke heat or CO alarms can be interconnected to a maximum of 12 units in total 1 x Ei128RBU counts as one unit.The Ei128RBU is designed for siting under one of the smokeheat alarms listed above. However a cover is supplied if installing remotely or with 260 series CO alarms.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system 1 x Ei128RBU counts as one unit.Fitted with a 4 way connector block for ease of wiring.The Relay can be set for continuous or pulse operation through a manual switch when in pulse operation mode the Relay contacts will automatically switch back to their original state after 5 seconds.Features 3 x 25mm trunking knockouts for surface wiring and centre knockout for recess wiring.Dimensions of unit 135mm diameter x 20mm depth.Weight inclusive of packaging 265g.Manufactured in Ireland.Key FeaturesFor use with 2100 160RC and 140RC alarmsRechargeable lithium battery back-upVolt free contacts as supplied for multiple useCan be configured to switch a 230V or 24V deviceTrunking knock-outs for easy and neat wiringAdditional connectors for ease of wiringContinuous or pulse operationFits discreetly behind any smoke heat alarm5 Year Guarantee

GBP 71.82

1

Aico RadioLINK Switched Input Module Ei408

Aico RadioLINK Switched Input Module Ei408The Ei408 Switched Input Modulehas been designed totriggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.The Ei408 is powered by a tamper proof sealed in lithium cell giving a completely wire free installation with a 10 year life.The unituses RadioLINK to wirelessly interconnect with the rest of the alarm system so once in place you will need toHouse Codethe switch into the alarm system.Operation of the Ei408On receiving a volt-free switched hardwired signal the unit will transmit a RadioLINK alarm signalThe indicator will flash green every 40 seconds to indicate that the lithium cell power supply is healthyIf the Lithium cells are depleted the indicator will flash amber every 10 seconds and the unit needs replacingTechnical SpecificationFor use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.Eliminates the need for any cabling between the Ei408 and the smoke heat and CO alarms used in the system.Features built-in tamper proof FDK Lithium cells capable of lasting at least 10 years under normal usage. Operating the yellow onoff switch sited on the back of the unit activates the cells. The LED on the front cover will flash red amber green on power up after this it will flash green every 40 seconds to indicate a healthy power supply.Low battery warning signal LED indicator flashes amber every 10 seconds to indicate depleted battery. If this occurs the complete unit should be replaced.The unit has built-in wiring terminals for connection to an external set of volt-free switched contacts. On the contacts closing the Ei408 will send out a RadioLINK alarm signal to trigger all other RadioLINK devices within the system.Radio frequency 868 MHz Band in accordance with RTTE Directive 19995EC this band has been designated for use with security products and only allows a 1 duty cycle so continuous transmission and interference form external sources is extremely remote and would be illegal.Range The type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass through. As a guide 30m should be the maximum distance between any of the RadioLINK units in the system.Up to 20 RadioLINK units can be used in one system. Range will be the limiting factor.Units are in Factory Code mode when received they will all communicate with each other. They must be House Coded to eliminate the risk of adjacent properties communicating with each other. After House Coding they will only communicate with other RadioLINK units coded at the same time.House Code Operate the House Code switch on all RadioLINK units in the system see the instructions supplied with other RadioLINK units being used. The green LED on the cover of the Ei428 will change to red and flash slowly this indicates that it will receive the unique serial numbers being sent by all other RadioLINK units in House Code. The number of flashes of the LED indicates the number of units in the system The Ei428 will return to normal standby mode automatically after 15 minutes. Pressing the House Code switch again will return it to normal standby immediately.The Ei408 is conformant to EN300220-1 2000-09 RF Performance and EN301489-3 2002-08 EMC.Designed for surface mounting.Ambient Temperature Range 4C to 40C. Humidity Range 0 to 90 relative humidity.Dimensions 90mm x 90mm x 43mm. Weight inclusive of packaging 240g.5 year guarantee.Manufactured in Ireland.Key FeaturesStand alone unit designed for use with RadioLINK bases AccessoriesAccepts a hardwired input e.g. from sprinkler systemVisual RF transmission and power indicatorPowered by built-in Lithium cellsUnique House CodingLow battery power warningRF performance to EN 300220-15 Year Guarantee

GBP 61.67

1

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery Powered

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery PoweredThe 5500 moisture detection series is designed to respond to the presence of water and other non-flammable conductive liquids and to be connected in the closed loop of an alarm system. Two sensors are available 5505 under carpet sensor and 5515 surface mount sensor.Any combination of up to 4 sensors can be used with the 5501 moisture processor.The 5501 moisture processor can be used with any closed loop control dialler or wireless transmitter input circuit. The processor comes with internal lithium batteries that have an anticipated life time of 10 to 15 years. The processor offers flexibility in mounting with no need for an external power source and minimal wiring required.Key FeaturesDetects presence of water and non-flammable conductive liquidsNo external power requiredSensor circuit totally isolated by optical couplingsUp to 4 sensors per 5501 moisture processor

GBP 64.02

1

STI STI-15C10CY Euro Stopper - Surface - 32mm - Yellow Shell - Custom Text

STI STI-15C10CY Euro Stopper - Surface - 32mm - Yellow Shell - Custom TextProtective cover helps prevent malicious or accidental false fire alarms. This newly styled protective cover further enhances the Stopper range which has helped to prevent false fire alarms around the world for decades without restricting legitimate operation of devices such as fire alarm break glass call points. Sleeker and less intrusive in its design this compact device incorporates the existing features of the Stopper but is now visibly smaller. The new hinge arrangement increases the durability strength and quality of this essential protective cover. Ideal for schools colleges hospitals nursing homes hotels and all public buildings where there is a history or a threat of false fire alarms.How It WorksThe Euro Stopper consists of a clear tamperproof tough polycarbonate cover and frame that retrofits over the break glass call point. When lifted to gain access to the break glass its optional battery powered integral sounder emits an ear piercing 96 dB at 1 metre. Immediate attention is drawn to the area and the prankster will either run or be caught.About the Glow Guide Multi KitThe Glow Guide is a unique material that is embedded in the perimeter of the frame and illuminates in the dark. It creates a radiant glow around the manual call point making it easier to locate in unlit areas. The Multi Kit comes with one Euro Stopper frame embedded with the Glow Guide 2 coloured housing shells red green 1 break seal and 2 label sheets in 13 languages. Available with or without sounder. If you require the product with sounder relay sounder wireless or with sounder wireless relay it is recommended to purchase the non-sounder version and then further purchase the appropriate accessory to suit your needs.Key FeaturesProtective cover helps prevent malicious or accidental false fire alarmsThree year guarantee against breakage of polycarbonate in normal use one year on electromechanical and electronic componentsPrevents false alarms without hindering legitimate operation of a manual call point in the event of an emergencyGlows in the darkTough polycarbonate housing can withstand the severest of knocks. InstallationA simple 4 fixing installation can retrofit over existing deviceCan accommodate flush or surface mount applicationsTypical working properties of polycarbonate are -40C to 121C -40 to 250FElectronics Available with or without a 96 dB integral sounder powered by a 3V lithium batteryOptional 12-24 VDC powered unitsOne breakseal is supplied with each model. Additional breakseals are available for added securityOther colours available - non Multi Kit versions onlyYou can now be alerted to any vandalism or authorised use of a manual call point in the event of an emergency. Upon activation the Euro Stopper when fitted with an optional transmitter and sounder will emit a localised alarm as well as triggering the 8-Channel Receiver STI-34108 providing a visual and audible indication remotely.

GBP 55.14

1

STI-15020ML Euro Stopper Flush Horn Pack Multi Kit with Sounder - Language - RedGreen incl. F

STI-15020ML Euro Stopper Flush Horn Pack Multi Kit with Sounder - Language - RedGreen incl. FProtective cover helps prevent malicious or accidental false fire alarms. This newly styled protective cover further enhances the Stopper range which has helped to prevent false fire alarms around the world for decades without restricting legitimate operation of devices such as fire alarm break glass call points. Sleeker and less intrusive in its design this compact device incorporates the existing features of the Stopper but is now visibly smaller. The new hinge arrangement increases the durability strength and quality of this essential protective cover. Ideal for schools colleges hospitals nursing homes hotels and all public buildings where there is a history or a threat of false fire alarms.How It WorksThe Euro Stopper consists of a clear tamperproof tough polycarbonate cover and frame that retrofits over the break glass call point. When lifted to gain access to the break glass its optional battery powered integral sounder emits an ear piercing 96 dB at 1 metre. Immediate attention is drawn to the area and the prankster will either run or be caught.About the Glow Guide Multi KitThe Glow Guide is a unique material that is embedded in the perimeter of the frame and illuminates in the dark. It creates a radiant glow around the manual call point making it easier to locate in unlit areas. The Multi Kit comes with one Euro Stopper frame embedded with the Glow Guide 2 coloured housing shells red green 1 break seal and 2 label sheets in 13 languages. Available with or without sounder. If you require the product with sounder relay sounder wireless or with sounder wireless relay it is recommended to purchase the non-sounder version and then further purchase the appropriate accessory to suit your needs.Key FeaturesProtective cover helps prevent malicious or accidental false fire alarmsThree year guarantee against breakage of polycarbonate in normal use one year on electromechanical and electronic componentsPrevents false alarms without hindering legitimate operation of a manual call point in the event of an emergencyGlows in the darkTough polycarbonate housing can withstand the severest of knocks. InstallationA simple 4 fixing installation can retrofit over existing deviceCan accommodate flush or surface mount applicationsTypical working properties of polycarbonate are -40C to 121C -40 to 250FElectronics Available with or without a 96 dB integral sounder powered by a 3V lithium batteryOptional 12-24 VDC powered unitsOne breakseal is supplied with each model. Additional breakseals are available for added securityOther colours available - non Multi Kit versions onlyYou can now be alerted to any vandalism or authorised use of a manual call point in the event of an emergency. Upon activation the Euro Stopper when fitted with an optional transmitter and sounder will emit a localised alarm as well as triggering the 8-Channel Receiver STI-34108 providing a visual and audible indication remotely

GBP 67.03

1

STI STI-15D20ML Euro Stopper Surface - 50mm - Horn Pack - Multi-Language - RedGreen

STI STI-15D20ML Euro Stopper Surface 50mm Horn Pack Multi-Language - RedGreenProtective cover helps prevent malicious or accidental false fire alarms. This newly styled protective cover further enhances the Stopper range which has helped to prevent false fire alarms around the world for decades without restricting legitimate operation of devices such as fire alarm break glass call points. Sleeker and less intrusive in its design this compact device incorporates the existing features of the Stopper but is now visibly smaller. The new hinge arrangement increases the durability strength and quality of this essential protective cover. Ideal for schools colleges hospitals nursing homes hotels and all public buildings where there is a history or a threat of false fire alarms.How It WorksThe Euro Stopper consists of a clear tamperproof tough polycarbonate cover and frame that retrofits over the break glass call point. When lifted to gain access to the break glass its optional battery powered integral sounder emits an ear piercing 96 dB at 1 metre. Immediate attention is drawn to the area and the prankster will either run or be caught.About the Glow Guide Multi KitThe Glow Guide is a unique material that is embedded in the perimeter of the frame and illuminates in the dark. It creates a radiant glow around the manual call point making it easier to locate in unlit areas. The Multi Kit comes with one Euro Stopper frame embedded with the Glow Guide 2 coloured housing shells red green 1 break seal and 2 label sheets in 13 languages. Available with or without sounder. If you require the product with sounder relay sounder wireless or with sounder wireless relay it is recommended to purchase the non-sounder version and then further purchase the appropriate accessory to suit your needs.Key FeaturesProtective cover helps prevent malicious or accidental false fire alarmsThree year guarantee against breakage of polycarbonate in normal use one year on electromechanical and electronic componentsPrevents false alarms without hindering legitimate operation of a manual call point in the event of an emergencyGlows in the darkTough polycarbonate housing can withstand the severest of knocksA simple 4 fixing installation can retrofit over existing deviceCan accommodate flush or surface mount applicationsTypical working properties of polycarbonate are -40C to 121C -40 to 250FAvailable with or without a 96 dB integral sounder powered by a 3V lithium batteryOptional 12-24 VDC powered unitsOne breakseal is supplied with each model. Additional breakseals are available for added securityOther colours available - non Multi Kit versions only. Remote Wireless Monitoring of Call PointsYou can now be alerted to any vandalism or authorised use of a manual call point in the event of an emergency. Upon activation the Euro Stopper when fitted with an optional transmitter and sounder will emit a localised alarm as well as triggering the 8-Channel Receiver STI-34108 providing a visual and audible indication remotely

GBP 76.06

1

Aico Ei3014 230v 3000 Series Heat Alarm

Aico Ei3014 230v 3000 Series Heat AlarmSuitable for detecting Heat in both the kitchen or garagethe Ei3014 Heat Alarm contains our tried and tested high-performance ThermistorHeat sensor. The Thermistor has been designed using a smaller thermal massproviding a faster alarm response when the trigger temperature of 58C isreached. Best for detecting heat build-up from large flaming fires it candifferentiate from smoke or steam to drastically reduce false alarms.The Ei3014 Heat Alarm is SmartLINK compatible Simply plugin an Ei3000MRF module for wireless interconnection data extraction andreal-time notifications of alarm activations and events via the SmartLINKGateway and Portal.The Heat Alarm contains AudioLINKtechnology which allowsyou to extract real time data from the alarm using its sounder directly to asmartphone or tablet via an App. A simple to read report is generateddisplaying details such as activation dates sensor status and alarm life thatcan be emailed to help form part of property records.The Ei3014 Heat Alarm is fully compatible with all otherAico alarms and accessories whether a system needs upgrading or an existingsystem needs expanding and works with either hard-wired RadioLINK or hybridinterconnecting systems.Key FeaturesContains a fast response Thermistor Heat sensorMains powered with a 10-year rechargeable lithium cellback-upAdd an Ei3000MRF SmartLINK module for wirelessinterconnection and data extractionCompatible with other Aico mains powered devicesBuilt-in AudioLINK data extraction technologyGrade D1 and compliant with Scottish legislationSupplied with an easy-fit base10 Year Guarantee

GBP 73.07

1

Aico MCP401RC 230v Manual Call Point with Rechargeable Back-up

Aico MCP401RC 230v Manual Call Point with Rechargeable Back-upThe MCP401RC Manual Call Point is an emergency device that when activated triggers all the alarms on the connected system. This Call Point is mains powered and can be hard wired interconnected anywhere into the alarm system.The front plate is made from a non-breaking plastic that means if the call point is used you can simply reset the plate rather than having to replace it.When the Manual Call Point is activated it will trigger all alarms causing them to sound.When the unit is reset using the key provided it will automatically cancel the interconnect signal and the alarms will stop sounding.Key FeaturesA unique Manual Call Point that mimics the feel of breaking glass whilst offering the benefits of a re-settable operating element230V AC mains powered with tamper proof rechargeable Lithium cells designed to last 10 years the life of the unit whilst providing up to 2 months operation in the event of mains failureSuitable for use with 2110e 160e and 140RC Series smoke heat and CO alarms up to a maximum of 20 including the MCP401RCEasily installed via a 3-core connection Live Neutral and interconnect the same as the smoke heat and CO alarms using 0.75mm or 1.00mm cableWhen the front plate is pressed a visible warning flag will appear to indicate it has been activated.Simple key to reset the unit no broken glassSupplied with 35mm deep surface mounting box rest key and all screws and fixingsDimensions 85 x 85 x 60mmWeight inclusive of packaging 230g5 year guarantee

GBP 45.18

1

Aico RadioLINK Manual Call Point Ei407

Aico RadioLINK Manual Call Point Ei407This call point is powered by a tamper proof sealed inlithium cell giving a completely wire free installation with a 10-year life.The front plate is made from a non-breaking plastic that means if the callpoint is used you can simply reset the plate rather than having to replace it.The Ei407 connects wirelessly using RadioLINKinterconnection technology so once in place you will need to House Code theswitch into the alarm system.Operation The indicator will flash green every 40 seconds to indicatethat the battery is healthyThe indicator will flash amber every 9 seconds to indicatethat the batteries are depletedKey FeaturesAllows for remote triggering of an alarm systemNon-breaking re-settable front platesContains 10-year lithium cell for completely wire freeinstallationConnects wirelessly with all other Aico wirelessinterconnection productsTechnical SpecificationFor use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarmsEliminates the need for any cabling between the Ei407 and the smoke andor heat alarms within the systemFeatures built-in tamper proof FDK Lithium cells capable of lasting at least 10 years under normal usage. operating the yellow onoff switch sited on the back of the unit activates the cells. The LED on the front cover will flash red amber green on power up after this it will flash green every 40 seconds to indicate a healthy power supply. If the LED flashes amber every 40 seconds this indicates a depleted battery and the complete unit must be replacedThe product is CE marked to indicate conformance to BS EN 600651998 Electrical Safety EN300220-1 V1.3.1 2000-09 RF Performance EN301489 V1.4.1 2002-08 EMC and has been 3rd party tested for electrical safety in accordance with Annex K of BS 5446 Pt 12000Radio frequency 868MHz in accordance with RTTE Directive 19995EC this band has been designated for use with security products and only allows a 1 duty cycle so continuous transmission and interference from external sources is extremely remote and would be illegalUp to 12 RadioLINK units can be used in one system. For larger systems contact our Technical Department for guidance also see section 7Range the type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass throughLow battery warning signal LED indicator flashes amber every 40 seconds to indicate depleted battery if this occurs the complete unit should be replacedSimply key to rest the unit no broken glassReplacement key MCRSK availableAmbient temperature range 4c to 40c. Humidity range 0 to 90 relative humidityExternal alarm RadioLINK signal operates sounder on any smoke alarm with a RadioLINK in the systemUnits are in factory code when received they will all communicate with each other. They must be House Coded to eliminate the risk of adjacent properties communicating with each other. After house coding they will only communicate with other units coded at the same timeHouse Code Operate the red House Code switch on the back of the unit. At the same time put all other RadioLINK units in the system into House Code see relevant instruction leaflets. The red LED on the front cover will flash rapidly to indicate that it is in House Code. Each RF base will learn the serial numbers of all units in the system any other RadioLINK units. The number of flashes of the amber light on the RF units indicates the number of alarms in the system. All units will return to normal standby mode automatically after 15 minutes. Pressing the House Code switch again will return them to normal standby immediatelyThe Ei407 can be incorporated into a system consisting of any additional RadioLINK componentsDimensions 85mm x 85mm x 57mm deep including mounting boxWeight 240g including packaging5 year guaranteeManufactured in Ireland

GBP 58.33

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)