38 results (0,17525 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M Product Part Number 499632 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 270m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 270m2 Delivers an airflow rate of up to 450 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq M benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 270m2 With a high performance of 450 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the market, with a noise level as low

GBP 2691.84
1

Special Offer Panasonic Counter Flow Ventilation VENTX 40V

Special Offer Panasonic Counter Flow Ventilation VENTX 40V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 380 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 266m³/h Airflow Maximum: 380m³/h Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 1080.00
1

Special Offer Panasonic Counter Flow Ventilation VENTX 30V

Special Offer Panasonic Counter Flow Ventilation VENTX 30V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 300 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 210m³/h Airflow Maximum: 300m³/h Approximate Property area capacity: 179m2 Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 960.00
1

BSK Notus 12 Room Kit

BSK Notus 12 Room Kit

Description MVHR Retrofit 12 room Kit Our Retrofit 12pt kit is a whole house heat recovery system consisting of a BSK NOTUS heat recovery unit and Quiet-Vent 12 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for retrofitting to 3- or 4-bedroom housing with a maximum floor area of 225m2 requiring up to 6 air extraction points and 6 air supply points This MVHR unit is ideal for retrofitting due to multiple orientation, latest lightweight EPP construction and ease of installation making this unit a highly recommended option   Key Features - Cloud control phone APP via Wi-Fi Touch screen wall mounted controller Advanced settings and controllability Internal Humidity sensor for automatic boost operation High capacity G4 air filters for superior air filtration Case manufactured of the latest EPP with a weight of only 18kg Full 100% summer bypass to supply unheated air in the summer Counterflow heat exchanger Multiple orientation inc. floor or wall for easy installation High heat recovery efficiency of up to 90%. Delivers an airflow rate of up to 375 m³/hour @ 100 Pa Suitable for floor areas up to 225m2   The Retrofit 12 room Kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-125-12pt   200m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 12 x Quality long reach air valve plenums that are easy to install 12 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework     What's in the box? 6 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 6 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P125-2 125mm - PVC Pipework x 2 meter 3 C125 125mm - PVC Pipe connector 10 B90125 125mm - PVC 90º bends 2 R150125P PVC reducer 150mm (FM) - 125mm (M) 2 QV125F-SILENCER Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC125 125mm - Exterior grille S/steel louvered Cowl 4 QVRC125 Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 2 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 4 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings) 12 QV75-PLEN Quiet-Vent 75mm Plenum 5 QV-75SR Quiet-Vent  75mm - Standard Sealing Ring (pack of 10) 2 QV75-10150TE Quiet-Vent 10 Pt Top Entry Distribution box -150 spigot (75mm) with 3 x blanking caps 1 NOTUS/HV/350 BSK NOTUS multi orientation 350m3/hr unit with humidity sensor 

GBP 2251.98
1

Quiet-Vent Himpel 4 Room Kit

Quiet-Vent Himpel 4 Room Kit

Description MVHR Retrofit 4 room Kit Our Retrofit 4 room kit is a whole house heat recovery system consisting of a QV-HEP100 heat recovery unit and Quiet-Vent 4 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for retrofitting to apartments and small housing with a maximum floor area of 90m2 requiring 2 air extraction points and 2 air supply points This MVHR unit is ideal for retrofitting due to multiple orientation, latest lightweight EPP construction and ease of installation making this unit a highly recommended option over the older type metal units available at this cost   Key Features - QV-HEP100 G3 and HEPA air filters for superior air filtration Case manufactured of the latest EPP with a weight of only 8kg Full 100% summer bypass to supply unheated air in the summer Enthalpy heat exchanger that does not require a condensation drain Multiple orientation of floor, wall or ceiling for easy installation High heat recovery efficiency of up to 81%. Delivers an airflow rate of up to 100 m³/hour @ 100 Pa Suitable for floor areas up to 90m2 Digital wall mounted controller Control options, including 3 speed settings, Summer By-Pass and Auto Mode   The Retrofit 4 room Kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-125-4pt   50m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 4 x Quality long reach air valve plenums that are easy to install 4 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 2 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 2 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P125-2 125mm - PVC Pipework x 2 meter 3 C125 125mm - PVC Pipe connector 10 B90125 125mm - PVC 90º bends 2 R150125P PVC reducer 150mm (FM) - 125mm (M) 2 QV125F-SILENCER Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC125 125mm - Exterior grille S/steel louvered Cowl 4 QVRC125 Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 1 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 1 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings) 4 QV75-PLEN Quiet-Vent 75mm Plenum 2 QV-75SR Quiet-Vent  75mm - Standard Sealing Ring (pack of 10) 2 QV75-06150TE Quiet-Vent  6 Pt Top Entry Distribution box -150 spigot (75mm) with 2 x blanking caps 1 QV-HEP100 QV- Himpel 100 EPP unit with controller, bypass and Hepa Filter  

GBP 1100.86
1

Quiet-Vent Himpel 8 Room Kit

Quiet-Vent Himpel 8 Room Kit

Description MVHR Retrofit 8 room Kit Our Retrofit 8 room kit is a whole house heat recovery system consisting of a QV-HEP150 heat recovery unit and Quiet-Vent 8 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for retrofitting to 2-to-3-bedroom housing with a maximum floor area of 130m2 requiring up to 4 air extraction points and 4 air supply points This MVHR unit is ideal for retrofitting due to multiple orientation, latest lightweight EPP construction and ease of installation making this unit a highly recommended option over the older type of metal units available at this cost   Key Features - QV-HEP150 G3 and HEPA air filters for superior air filtration Case manufactured of the latest EPP with a weight of only 8kg Full 100% summer bypass to supply unheated air in the summer Enthalpy heat exchanger that does not require a condensation drain Multiple orientation of floor, wall or ceiling for easy installation High heat recovery efficiency of up to 77%. Delivers an airflow rate of up to 150 m³/hour @ 100 Pa Suitable for floor areas up to 130m2 Digital wall mounted controller Control options, including 3 speed settings, Summer By-Pass and Auto Mode   The Retrofit 8 room Kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-125-8pt   100m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 8 x Quality long reach air valve plenums that are easy to install 8 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 4 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 4 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P125-2 125mm - PVC Pipework x 2 meter 3 C125 125mm - PVC Pipe connector 10 B90125 125mm - PVC 90º bends 2 R150125P PVC reducer 150mm (FM) - 125mm (M) 2 QV125F-SILENCER Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC125 125mm - Exterior grille S/steel louvered Cowl 4 QVRC125 Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 1 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 2 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings) 8 QV75-PLEN Quiet-Vent 75mm Plenum 4 QV-75SR Quiet-Vent  75mm - Standard Sealing Ring (pack of 10) 2 QV75-10150TE Quiet-Vent 10 Pt Top Entry Distribution box -150 spigot (75mm) with 3 x blanking caps 1 QV-HEP150 QV- Himpel 150 EPP unit with controller, bypass and Hepa Filter

GBP 1416.08
1

Vent-Axia NBR 14 Room Kit

Vent-Axia NBR 14 Room Kit

Description MVHR New Build (NBR) 14 room Kit Our New Build Residential (NBR) 14 room kit is a complete whole house heat recovery system consisting of a Vent Axia Plus B heat recovery unit and Quiet-Vent 14 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 4-to-5-bedroom housing with a maximum floor area of 250m2 requiring up to 6 air extraction points and 8 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty The New Build Residential (NBR) 14 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-150-14pt   250m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 14 x Quality long reach air valve plenums that are easy to install 14 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 6 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 8 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P150-2 150mm - PVC Pipework x 2 meter 3 C150 150mm - PVC Pipe connector 10 B90150 150mm - PVC 90º bends 2 QV- ADP180150 Quiet-Vent Metal Adaptor for Distribution box 180 F/M - 150 Male 2 QV150F-SILENCER Quiet-Vent 150mm x 500mm - Flexi insulated sound attenuator with adaptors 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC150 150mm - Exterior grille S/steel louvered Cowl 4 QVRC150 Quiet-Vent 150mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 3 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 5 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings)

GBP 3177.30
1

Vent-Axia BH NBR 10 Room Kit

Vent-Axia BH NBR 10 Room Kit

Description MVHR New Build (NBR) 10 room Kit Our New Build Residential (NBR) 10 room kit is a complete whole house heat recovery system consisting of a Vent Axia heat recovery unit and Quiet-Vent 10 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 2-to-3-bedroom housing with a maximum floor area of 150m2 requiring up to 5 air extraction points and 5 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia BH Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Delivers an airflow rate of up to 245 m³/hour @ 100 Pa Suitable for floor areas up to 150m2 Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options   2 x G4 filters (optional M5) Low weight of only 15KG UK manufactured with 5 Year parts warranty   The New Build Residential (NBR) 10 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-125-10pt   100m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 8 x Quality long reach air valve plenums that are easy to install 8 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? Qty Internal Part Number Product Description 5 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 5 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P125-2 125mm - PVC Pipework x 2 meter 3 C125 125mm - PVC Pipe connector 10 B90125 125mm - PVC 90º bends 2 R150125P PVC reducer 150mm (FM) - 125mm (M) 2 QV125F-SILENCER Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC125 125mm - Exterior grille S/steel louvered Cowl 4 QVRC125 Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 2 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 3

GBP 2212.28
1

Airflow Geothermal Kit

Airflow Geothermal Kit

Airflow Geothermal Kit Product Part Number Airflow Geothermal Kit - AFGEOTHERM Description The Brine to Air Exchanger enhances the thermal efficiency of your MVHR unit by provided additional preheating to your unit during the winter and also helps to cool the air during the summer. The Brine to Air Exchanger uses the warmth in the ground to maintain the brine’s temperature of 8 - 12°C. A 1.2 m deep flexible polyethylene under-soil tube pumps brine through a loop. To increase the heat exchange the tube should be laid directly under the soil in a sand bed. The minimum space between the parallel tubes should be 0.5 m. Alternatively to laying the tube horizontally a vertical bore can be used. Operation Brine to Air Energy collector can work either in automatic or manual mode. In automatic mode operation of the circulation pump is controlled by the MVHR unit. The pump circulates the brine when the outside air temperature falls below 5°C or when actual supply air temperature is higher than the set value. System can be switched into the manual mode by using an operation switch. In this mode the circulation pump is always turned on regardless of the outdoor air temperature. Installation Brine to air heat exchanger is mounted in-line before mvhr unit. It is important that the air flows through the heat exchanger in horizontal direction. To provide optimum performance it is recommended that approx. 1m of straight duct is mounted upstream and downstream of the brine to air heat exchanger. The ducting should be done with Airflex ISO system to avoid creation of the condensation. Alternatively insulated spiral ducting can be used. Pipework and connection between hydraulic kit and brine to air heat exchanger shall be provided on site. The pipe connections of the hydraulic kit are ¾” IG. The quick vent valve must be installed at the highest point of the pipework. It is recommended to install undersoil tube when outdoor air is above 5°C. The area where the undersoil tube is laid should not be built over so it is guaranteed that seeping rainwater can contribute to the thermal regeneration of the soil. The filling of the system is carried out via feed and drain cock located on the hydraulic kit. During this operation take care to avoid air entering the system. After the installation of the undersoil pipework, system should be tested at high pressure for tightness check. How does a brine Geothermal system work A network of brine (salty water) filled pipes are buried at a depth of approx 1.5 meters and connect to the air intake of a heat recovery ventilation system via a heat exchanger. The geothermal ducts use the energy stored in the ground. At a depth of 1 - 2 meters, the ground temperature in the UK varies between +8 and +12 ºC depending on the season and on the soil type. By using the relatively stable temperature at this, the efficiency of the ventilation system is greatly improved  This provides a source of heating or cooling for a building. As an example, if in the winter months the outside temperature is -5ºc, the ground

GBP 2809.33
1

Vent-Axia NBR 18 Room Kit

Vent-Axia NBR 18 Room Kit

Description MVHR New Build (NBR) 18 room Kit Our New Build Residential (NBR) 18 room kit is a complete whole house heat recovery system consisting of a Vent Axia Highflow heat recovery unit and Quiet-Vent 18 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 5-to-7-bedroom housing with a maximum floor area of 345m2 requiring up to 8 air extraction points and 10 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia Plus B Suitable for floor areas up to 340m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty The New Build Residential (NBR) 14 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-180-18pt   350m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 18 x Quality long reach air valve plenums that are easy to install 18 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 8 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 10 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P180M-2 180mm - Metal Pipework x 2 meter 10 B90180M 180mm - Metal B90º Vent Pressed Bend 3 C180MM 180mm - Metal NP Vent Male Coupling 2 QV180F-SILENCER Quiet-Vent 180mm x 500mm - Flexi insulated sound attenuator with adaptors 6 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 9041229 180mm - Exterior grille S/steel louvered Cowl 4 CRC170-185 185mm - Rubber flexible circular duct connector (170-185) 2 ST75 75mm - Roll Silver Foil Tape 4 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 7 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings) 18 QV75-PLEN Quiet-Vent 75mm Plenum 7

GBP 4288.01
1

Quiet-Vent Himpel 100 EPP Unit with Controller, Bypass and Hepa Filter

Quiet-Vent Himpel 100 EPP Unit with Controller, Bypass and Hepa Filter

Quiet-Vent Himpel 100 EPP Unit with Controller, Bypass and Hepa Filter Product Part Number QV-HEP100 Quiet-Vent Himpel 100 EPP Unit with Controller, Bypass and Hepa Filter This unit is ideally suited for retrofitting to apartments and small housing with a maximum floor area of 90m2 requiring two air extraction points and two to three air supply points This MVHR unit is ideal for retrofitting due to multiple orientation, latest lightweight EPP construction and ease of installation making this unit a highly recommended and superior option over the older type of metal units available at this cost BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems, Key Features - QV-HEP100 G3 and HEPA air filters for superior air filtration Case manufactured of the latest EPP with a weight of only 8kg Full 100% summer bypass to supply unheated air in the summer Enthalpy heat exchanger that does not require a condensation drain 125mm unit pipe connections Multiple orientation of floor, wall or ceiling for easy installation High heat recovery efficiency of up to 81%. Delivers an airflow rate of up to 100 m³/hour @ 100 Pa Suitable for floor areas up to 90m2 Digital wall mounted controller included with unit Control options, including 3 speed settings, Summer By-Pass and Auto Mode Slimline dimensions of 580 x 520 x 296mm 12 Month parts warranty Performance Suitable for quick and easy installation of any property requiring extraction from two bathrooms and air supply into two or three rooms Digital Controller Unlike most MVHR units this unit comes complete with a digital wall controller that allows you to select the 3 three speed settings, Bypass and timer *No other sensors or switches are available for this unit  Filtration You can breathe easy knowing that there is a G3 filter to both air streams and a HEPA filter (H13 Medical grade) to the Air supply EPP construction Just Like our most expensive MVHR units this unit has an EPP body that is light to carry at only 8KG and has far superior sound attenuation, heat retention and airtightness properties 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Multiple orientation Due to the Enthalpy heat exchanger, you can install the unit on a wall, floor or ceiling via the provided fixing points on the unit without worrying about a condensation drain

GBP 561.79
1

Mitsubishi Lossnay-VL350 Units

Mitsubishi Lossnay-VL350 Units

Part Numbers Mitsubishi VL-350CZPVU-L-E (Left hand) Mitsubishi VL-350CZPVU-R-E (Right hand) Description The Mitsubishi VL-350 is a quality unit with the advantage of a unit mounted controller with 5 years part warranty and provides a maximum flow rate of 350m3/hr suitable for a house up to 210 m2 floor area with up to 6 kitchens & bathrooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Mitsubishi VL-350 Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa Unit mounted LCD controller Ultra quiet with as low as 15dB High heat recovery efficiency of up to 90%. On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 5-year warranty* (Listed parts Only) 'A+' energy rating Left hand right oriented models available Optional Wi-Fi control UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace Optional ePM2.5 50% to air supply Optional NOX 90% filter to air supply CONTROL OPTIONS The Mitsubishi VL units are controlled by one of the following: Control Via Unit mounted digital controller 0-10v sensor Volt free contacts Additional external sensors achieving on-demand ventilation Switched live signal from remote switches Optional wall controller (P-RCC-E) Optional Wi-Fi integration to phone (MAC-5671F-E) Optional Wi-Fi with additional accessory - MAC-5617F-E   Summer By-Pass The VL range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-3°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Orientation The Mitsubishi Lossnay VL units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket

GBP 1202.95
1

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire ceiling void unit - ECO-LP2 Nuaire ceiling void unit Opposite hand - ECO-LP2-OH Description The new MRXBOXAB-ECO-LP2 is a Low-Profile ceiling mounted unit that is specificallydesigned to fit easily into apartments with ceiling void restrictions of only 200mm and has a high performance of 285m3/hr with low SFP of 0.56 wls Controllability is provided by optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO-LP2 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 285 m³/hour @ 100 Pa High heat recovery efficiency of up to 79%. 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: Manual 100% adjustment of background and boost speeds 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

GBP 1692.20
1

Zehnder ComfoAir 155 WM

Zehnder ComfoAir 155 WM

Zehnder ComfoAir 155 WM Product Part Number Zehnder ComfoAir 155 WM for wall or cupboard mounting - CA155WM-GB Description Zehnder ComfoAir 155 WM - CA155WM-GB The Zehnder ComfoAir 155 WM is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the

GBP 1361.53
1

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Description Zehnder ComfoAir 185 WM - CA185WM-GB The Zehnder ComfoAir 185 WMe is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard Sap Appendix Q listed with (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,   Key features- Zehnder ComfoAir 185 WM Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 92% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor SFP as low as 0.57 wls Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed   Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed   Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G3 filters are fitted to the unit that are easy to replace Summer By-Pass The Zehnder range of units have a 100% summer by-Pass Low Noise Levels Heat Exchanger

GBP 1857.77
1

Zehnder ComfoAir 160

Zehnder ComfoAir 160

Zehnder ComfoAir 160 Product Part Number Zehnder ComfoAir 160 - CA160-GB Zehnder ComfoAir 160 Luxe - CA160LUXE-GB Zehnder ComfoAir 160 Luxe with pre-heater - CA160LUXEPH-GB Description The Zehnder ComfoAir 160 can be ceiling or wall mounted and suitable for properties up to 100m2 Available in two versions ComfoAir 160 – controlled by optional 3-speed switch ComfoAir 160 Luxe – controlled by optional digital controller or RF controllers Sap Appendix Q listed with (A+) energy rating and is Passive house approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 100m2 85% heat recovery efficiency. 100% full and filtered modulating summer bypass. Left- or right-hand configuration on same unit Luxe has digital or RF controller options Passive house Approved 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact G4 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) ComfoAir 160 controllers Comfo Control Basic The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Comfo Control Basic LED The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system Maintenance notification ComfoAir 160 Luxe controllers Comfo Switch C67 Led controller that allows you to adjust speed and view service alerts  Comfo Control RFZ 3 Speed wireless controller (will only operate with the use of the RF-PCB) Comfo Control RFZT wireless timer controller of 10min to 90min (will only operate with the use of the RF-PCB) RF-PCB The Zehnder RF-PCB enables the CCRFZ (655 000 755) controller to be used with the ventilation system without the need for the Comfo Sense C67. Room Sensors 12V 0-10V RH sensor The Zehnder 12V 0-10V remote humidity sensor enables a signal to be sent to the ventilation system to control the corresponding flow rate. 12V 0-10V CO2 sensor The Zehnder 12V 0-10V remote CO2 sensor and combined three position switch is designed to enable the user to manually select the desired ventilation systems flow rate based on the visual air quality indicator, or automatically adjust the unit relevant to the CO2 level. Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes

GBP 2349.56
1

Zehnder ComfoAir 350R

Zehnder ComfoAir 350R

Description Zehnder ComfoAir 350, left-handed CA350L Zehnder ComfoAir 350, right-handed CA350R   The Passive House Approved Zehnder ComfoAir 350 can be floor or wall mounted MVHR unit and suitable for properties up to 200m2 and has adjustable spigots Sap Appendix Q listed with (A+) energy rating and is Passive house approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,   Key features- Zehnder ComfoAir 350 Suitable for home sizes up to 200m2 Airflow rate @100Pa - 350m3/h 88% heat recovery efficiency. 100% full and filtered modulating summer bypass. Left- or right-hand configuration Passive house Approved 100% variable AUX speed for use as a way mode, medium speed or purge boost. Volt free contact G4 filtration Tool free filter access. SAP Appendix Q listed   Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers ComfoAir 350 controllers (optional) Comfo Control Basic The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Comfo Control Basic LED The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system Maintenance notification RF-PCB The Zehnder RF-PCB enables the CCRFZ (655 000 755) controller to be used with the ventilation system without the need for the Comfo Sense C67. Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Installation Wall bracket is included with unit and an optional floor stand is available Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors with 100% variable supply and extract motor control Filtration 2 x G4 filters are fitted to the unit that are easy to replace Summer By-Pass The Zehnder range of units have a 100% summer by-Pass Low Noise Levels Heat Exchanger A standard or optional Enthalpy heat exchanger is available Frost Protection The unit has a frost protection programme Orientation This unit has Left- or right-hand configuration and please check before ordering Warranty Zehnder offer a 2-year warranty but can

GBP 1724.53
1

Ebac VA32

Ebac VA32

EBAC VA32 R (Right) EBAC VA32 L (Left) Description The EBAC VA32 is a quality Uk manufactured MVHR unit with good controllability and provides a maximum flow rate of 245m3/hr suitable for a house up to 150 m2 floor area with up to 3 kitchens & bathrooms Controllability is provided by a digital touch screen controller that comes complete with the unit and has internal humidity & Co2 sensors for demand-controlled ventilation BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – EBAC VA32 Digital Touch Screen controller Smart control option Suitable for floor areas up to 172m2 Delivers an airflow rate of up to 288 m³/hour @ 100 Pa High heat recovery efficiency of up to 88%. Internal humidity sensor for automatic speed control Internal Co2 and temperature sensors On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer 2 x G4 filters Galvanised steel casing with 32mm thermal insulation 5-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available Adjustable feet Sap Appendix Q (BRE) approved UK/CA marked Surge protected Integral Humidity Sensor The EBAC unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace CONTROL OPTIONS The EBAC units are controlled by one of the following: Digital touchscreen Controller On-demand ventilation through built-in humidity & Co2 sensors Switched live signal from light / remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 88% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The EBAC units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The EBAC VA32 units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of double skin powder coated galvanised steel with a 32mm thermal insulation Mounting The units are wall mounted as standard and are supplied with a wall bracket If floor mounting it is recommended to elevate the unit by 150mm to allow access to the condensation drain The four feet are adjustable to allow for any uneven surface Accessories EBAC VA32 Replacement filters - VA32-G4FILTER

GBP 1200.00
1

Zehnder ComfoAir 155 WMe

Zehnder ComfoAir 155 WMe

Zehnder ComfoAir 155 WMe Product Part Number Zehnder ComfoAir 155 WMe for wall or cupboard mounting - CA155WMe-GB Description Zehnder ComfoAir 155 WMe - CA155WMe-GB The Zehnder ComfoAir 155 WMe is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This is a similar unit to the 155WM with lower SF but has a lower heat recovery rate and energy rating (A) BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 90% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor SFP as low as 0.5 wls Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors

GBP 1280.77
1

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting Product Part Number CA155CM-GB Description Zehnder ComfoAir 155 CM - CA155CM-GB The Zehnder ComfoAir 155 CM is a ceiling mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate  Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation  bracket is included with unit Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional G4 to air supply Summer By-Pass

GBP 1434.06
1

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery Unit Product Part Number Vent Axia Kinetic High Flow  Right Handed Heat Recovery Unit - 408449 Vent Axia Kinetic High Flow Left Handed Heat Recovery Unit - 408451 Description The UK’s top selling MVHR unit for houses with a max floor area of 345m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia High flow Suitable for floor areas up to 345m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 34KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 345m2 With a high performance of 575 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection

GBP 2208.00
1

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Sentinel Kinetic FH Heat Recovery Unit Product Part Number Vent Axia Kinetic F Right Handed - 408167 Vent Axia Kinetic F Left Handed - 408169 Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia FH Suitable for floor areas up to 185 m2 Delivers an airflow rate of up to 310 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 18KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 185m2 With a high performance of 310 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V

GBP 1547.52
1

Vent Axia plus B

Vent Axia plus B

Vent Axia plus B Product Part Number Vent Axia Plus B Right Handed Unit - 443028 Vent Axia Plus B Left Handed Unit - 443028L(Special order only) Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 250m2 With a high performance of 425 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Optional 180mm/200mm spigots can simplify connection in commercial installations where larger diameter duct work has been used. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V sensor supply Integral on/off or trickle boost function from remote switch, e.g. PIR occupancy detector Switched Live input with adjustable ‘delay-on’ feature Fan failure or component failure indicated via individual fault code display Running time counter

GBP 1660.80
1