KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR Unit (wall switch model) Product Part Number Losney VL-100 Wall Mounted Single Room MVHR unt (wall switch model) - VL-100EU5-E Description Mitsubishi VL-100EU5-E single room heat recovery unit for field supplied external wall switch. The wall mounted VL-100EU5-E is an efficient single room heat recovery unit for residential homes and small offices that require fresh, clean air and the removal of stale air with minimal heat loss. NOTE: The VL-100EU5-E has the option to fit a field supplied external wall switch. A wall switch for speed control is not supplied with the unit. Recommended switch option 'Quiet-Vent Rocker Switch". Technical Features Up to 80% Heat recovery 106 m3 h/r max flow Sound pressure (dBA) 25 – 37 Weight 7.5kg Dimensions W/D/H (mm) 620/ 200/ 265 2 x 75 (mm) spigots (ID)

GBP 299.10

1

Vent-Angel Ventilation Fire Safety Unit

Vent-Angel Ventilation Fire Safety Unit Product Part Number Vent-Angel Fire Safety Unit - QV-VA-21 Description The Vent-Angel is suitable for domestic homes and apartments and connects to any domestic fire alarm and will in the unfortunate event of a fire will remove the power supply to any type of Ventilation unit. The Vent-Angel unit can also control mains powered fire dampers, Purge fans or other devices The Vent -Angel is simple to install and comes complete with a discrete wall mounted control panel to test and reset the system. Why Use a Vent-Angel If a fire breaks out there is a possibility that any system that supplies fresh air could further cause the fire to intensify and spread. If even a small fire breaks out the smoke will enter the ventilation unit’s ductwork that could be very costly to remove any contaminants and smell. Control Panel The Vent-Angel includes a Test / Rest switch plate which would be mounted remotely in a location that has easy access (i.e. Hallway, Utility room), the switch plate also has LED operational indication. i.e. the Test push button with be illuminated Green under normal running conditions and the Reset push button will be illuminated Red in the event of a fault. The Test / Reset switch plate will also allow the system to be tested by pushing the TEST button. (It is recommended that this test is carried out twice yearly), to Reset the system press the RESET button, this action is also required if the system has been activated. Please ensure all Smoke/Fire Alarm issues have been resolved before activating the Vent Angel system. Contents: 1 x Vent Angel unit 1 x Vent Angel Test/Reset switch plate 1 x 15m length of 9 core YY cable 1 x 4mm O ring crimp 2 x Lockable Glands (FUW optional Fire Damper / Purge unit)

GBP 204.00

1

Vent Axia Ecotronic Humidity Sensor

Vent Axia Ecotronic Humidity Sensor Product Part Number Vent Axia Ecotronic Humidity Sensor - 563532 Description An adjustable set point, solid state on/off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Dimensions Height x Weight x Depth87mm x 87mm x 33mm

GBP 199.74

1

Vent Axia 240v Ambient Response Humidity Sensor

Vent Axia 240v Ambient Response Humidity Sensor Product Part Number Vent Axia Ambient response Humidity Sensor - 563550 Description An adjustable set point, solid state on/off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Dimensions (H x W x D): 87 x 87 x 33 (mm)

GBP 360.00

1

Vent Axia Lo-Carbon Solo Plus HT

Vent Axia LO-CARBON SOLO PLUS HT Product Part Number Vent Axia Solo Plus HT - 427479 Description Long Life Ventilation The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F. Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F. The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR. All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

GBP 199.68

1

DucoBox Silent UK MEV Unit with Humidity Sensor

Part no: 0000-4490 DucoBox Silent MEV Unit with Humidity Sensor The DucoBox silent Uk is a high quality MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system Demand controlled with an internal humidity sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions! Silent Plus Kit The Silent Plus Kit provides additional acoustic damping of up to 3 dB(A)! The kit consists of three acoustic composite foam pads and three acoustic caps that are placed into the predesigned inserts inside the unit Quiet-Vent adaptors The Quiet-Vent 125 to 90 adapters allow you to connect the 90mm radial pipe directly to the unit avoiding the use of a distribution box that will provide many benefits over using solid rigid ducting Up to 7 number 90mm radial ducts can be used on the unit This option will reduce installation time over solid rigid duct, reduce cost as there is no need for a distribution box, and comply with the latest building control requirements Fault Indicator With the optional wall mounted fault indicator, you can be notified by colored indicator light when a fault is detected (max one per unit) Boost switch A boost switch will allow the user to manually increase or decrease the speed, there is a manual 2 speed and 3 speed switches available Only one boost switch is recommended per unit and if the speed is set to high it will override any sensors and remain at that speed till manually reset to a lower speed A boost switch is required to commission the unit

GBP 345.20

1

Nuaire DRI ECO LC PIV

Nuaire DRI ECO LC (Control on Unit) PIV Product Part Number DRI ECO LC Description Basic model with controls sited on the unit within the loft. The unit is fitted with an internal temperature sensor. This sensor continuously monitors the temperature in the loft, boosting the air volume when the loft temperature is above a set level (heat recovery mode). If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. The unit comes with a 5 year warranty: 1 year parts and labour, remaining 4 years parts only (UK and Ireland only).

GBP 344.54

1

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor Product Part Number Vent Axia MVDC-MSH - 443298 Key Features Internal Humidity sensor Ultra-quiet - acoustically lined for low noise levels Recognised in SAP Appendix Q Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor Ceiling, wall, or floor Installation is recommended PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (mm) 330 long x 391 wide x 248 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. MVDC-MS H (443298) the Boost setting is activated by the internal humidity sensor. The internal humidity sensor uses one of the two available LS inputs, the other remaining LS input can be used to switch the unit to Purge speed. MVDC-MS H has the option to switch from Normal to Boost speed (in effect over-riding the internal humidity sensor), this can be achieved by connecting an isolated switched live connection to the LS connection on the power supply terminal block. This must be isolated by using, for example an Isolator Relay Control, Vent-Axia part number 442030, or similar. Isolator relay controller, Vent-Axia part number 442030

GBP 204.00

1

Vent Matika EKA NI duct heater

Vent Matika EKA NI duct heater Description The Vent Matika EKA NI range of electric duct heaters are Used in ventilation systems as heaters for comfort, or preheaters, to protect the ventilation unit from frost. The EKA NI is controlled by a room mounted set point controller BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, KEY FEATURES – Vent Matika NI heater Controlled via room mounted set point controller Internal temperature regulator May be used as a Pre Heater or a Post Heater Twin overheating protection Easy to use screw terminals Rubber sealed ductwork connections Can be installed both horizontally and vertically Stainless steel heating element Aluzinc Casing CE, RoSH & Reach certified CONTROL OPTIONS The EKA NV has a wall mounted setpoint controller connected to a duct mounted temperature sensor at the heater When connected, the heater is working according to the duct sensor, and the supply air temperature sensor limits supply air temperature – +15°C…+40°C. Overheating Protection Two overheat protection thermostats are installed in the electrical circular heater EKA. The first one with automatic reset, turns off the heating when the temperature reaches 50 °C and turns on when the temperature drops below 50 °C. The second with manual safety reset, turns off the heating when the temperature reaches 100 °C. In this case you need to figure the cause of the overheating of the heater. Eliminate the overheating cause and press the RESET button on the heaters cover. Construction Manufactured of from Aluzinc coated steel which is high temperature proof Mounting Heaters can only be installed inside away from moisture and mounted horizontally with the electrical connection box facing upwards or sideways and vertically (only if the air flow direction upwards). Installation Models These models are kept in stock, but other sizes and power outputs are available to order and please contact our team for cost and availability 100mm - 0.6kw Electric Duct Heater - EKA-NI-100-0.6 125mm - 1.2kw Electric Duct Heater - EKA-NI-125-1.2 160mm - 1.2kw Electric Duct Heater - EKA-NI-160-1.2 160mm - 2.4kw Electric Duct Heater - EKA-NI-160-2.4 200mm - 3.0kw Electric Duct Heater - EKA-NI-200-3.0 250mm - 3.0kw Electric Duct Heater - EKA-NI-250-3.0 Optional accessories PTC Airflow sensor– Unit mounted sensor for electronic protection from insufficient airflow. The heater is only allowed to work if the airflow velocity is 1,5m/s or higher PS Differential Pressure Switch – a unit mounted pressure switch that provides mechanical protection against loss or insufficient airflow. The heater if not allowed to heat unless a minimum airflow of 1,5m/s is reached. (Note -due to required velocity the PTC or PS option may not work on some smaller domestic MVHR or MEV systems with low airflow rates) PTC/PS – Sensor for minimum air velocity detection and diﬀ. pressure switch for air ﬂow detection PTC/K – Sensor for minimum air velocity detection and contactor for overheating protection 2NTC – 2 sensors for the air temperature measuring PTC/2NTC – Sensor for min. air velocity detection and 2 sensors for the air temperature measuring By ordering the PS, an internal contactor for power supply is added to the heater as well. BPC Support We don’t sell boxes; we provide a service that few can match Free

GBP 291.68

1

Vent Matika EKA NIS duct heater

Vent Matika EKA NIS duct heater Description The Vent Matika EKA NIS range of electric duct heaters are Used in ventilation systems as heaters for comfort, or preheaters, to protect the ventilation unit from frost The Vent Matika EKA NIS range of electric duct heaters are controlled by an external 0 to 10v DC signal from a compatible MVHR unit or independent controller BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key Features Controlled via a 0 to 10v DC signal Internal temperature regulator May be used as a Pre Heater or a Post Heater Twin overheating protection Easy to use screw terminals Rubber sealed ductwork connections Can be installed both horizontally and vertically Stainless steel heating element Aluzinc Casing CE, RoSH & Reach certified Control Options 0-10v sensor from a compatible MVHR unit or independent controller will allow 0-100% control of the heaters power Overheating Protection Two overheat protection thermostats are installed in the electrical circular heater EKA. The first one with automatic reset, turns off the heating when the temperature reaches 50 °C and turns on when the temperature drops below 50 °C. The second with manual safety reset, turns off the heating when the temperature reaches 100 °C. In this case you need to figure the cause of the overheating of the heater. Eliminate the overheating cause and press the RESET button on the heaters cover. Construction Manufactured of from Aluzinc coated steel which is high temperature proof Mounting Heaters can only be installed inside away from moisture and mounted horizontally with the electrical connection box facing upwards or sideways and vertically (only if the air flow direction upwards). Installation Temperature The maximum temperature of the output is 50 °C. Dimensions Models These models are kept in stock, but other sizes and power outputs are available to order and please contact our team for cost and availability 100mm - 0.6kw Electric Duct Heater - EKA-NIS 100-0.6 125mm - 1.2kw Electric Duct Heater - EKA-NIS-125-1.2 160mm - 1.2kw Electric Duct Heater - EKA-NIS-160-1.2 160mm - 2.4kw Electric Duct Heater - EKA-NIS-160-2.4 200mm - 3.0kw Electric Duct Heater - EKA-NIS-200-3.0 250mm - 3.0kw Electric Duct Heater - EKA-NIS-250-3.0 Optional accessories PTC Airflow sensor– Unit mounted sensor for electronic protection from insufficient airflow. The heater is only allowed to work if the airflow velocity is 1,5m/s or higher PS Differential Pressure Switch – a unit mounted pressure switch that provides mechanical protection against loss or insufficient airflow. The heater if not allowed to heat unless a minimum airflow of 1,5m/s is reached. (Note -due to required velocity the PTC or PS option may not work on some smaller domestic MVHR or MEV systems with low airflow rates) PTC/PS – Sensor for minimum air velocity detection and diﬀ. pressure switch for air ﬂow detection PTC/K – Sensor for minimum air velocity detection and contactor for overheating protection 2NTC – 2 sensors for the air temperature measuring PTC/2NTC – Sensor for min. air velocity detection and 2 sensors for the air temperature measuring By ordering the PS, an internal contactor for power supply is added to the heater as well. BPC Support We don’t sell boxes; we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guaranteed Inhouse design Team Inhouse certified training Largest range and stock available Worldwide delivery options

GBP 195.38

1

Vent Matika EKA NV duct heater

Vent Matika EKA NV duct heater Description The Vent Matika EKA NV range of electric duct heaters are Used in ventilation systems as heaters for comfort, or preheaters, to protect the ventilation unit from frost. The EKA NV is controlled by a duct temperature sensor and unit mounted set point controller BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key Features Controlled via unit mounted set point controller Internal temperature regulator May be used as a Pre Heater or a Post Heater Twin overheating protection Easy to use screw terminals Rubber sealed ductwork connections Can be installed both horizontally and vertically Stainless steel heating element Aluzinc Casing CE, RoSH & Reach certified Control Options The EKA NV unit uses a duct mounted temperature sensor and is controlled via the set point potentiometer on the top of the heater casing. Overheating Protection Two overheat protection thermostats are installed in the electrical circular heater EKA. The first one with automatic reset, turns off the heating when the temperature reaches 50 °C and turns on when the temperature drops below 50 °C. The second with manual safety reset, turns off the heating when the temperature reaches 100 °C. In this case you need to figure the cause of the overheating of the heater. Eliminate the overheating cause and press the RESET button on the heaters cover. Construction Manufactured of from Aluzinc coated steel which is high temperature proof Mounting Heaters can only be installed inside away from moisture and mounted horizontally with the electrical connection box facing upwards or sideways and vertically (only if the air flow direction upwards). Installation Temperature The maximum temperature of the output is 50 °C. Dimensions Models These models are kept in stock, but other sizes and power outputs are available to order and please contact our team for cost and availability 100mm - 0.6kw Electric Duct Heater - EKA-NV-100-0.6 125mm - 1.2kw Electric Duct Heater - EKA-NV-125-1.2 160mm - 1.2kw Electric Duct Heater - EKA-NV-160-1.2 160mm - 2.4kw Electric Duct Heater - EKA-NV-160-2.4 200mm - 3.0kw Electric Duct Heater - EKA-NV-200-3.0 250mm - 3.0kw Electric Duct Heater - EKA-NV-250-3.0 Optional accessories PTC Airflow sensor– Unit mounted sensor for electronic protection from insufficient airflow. The heater is only allowed to work if the airflow velocity is 1,5m/s or higher PS Differential Pressure Switch – a unit mounted pressure switch that provides mechanical protection against loss or insufficient airflow. The heater if not allowed to heat unless a minimum airflow of 1,5m/s is reached. (Note -due to required velocity the PTC or PS option may not work on some smaller domestic MVHR or MEV systems with low airflow rates) PTC/PS – Sensor for minimum air velocity detection and diﬀ. pressure switch for air ﬂow detection PTC/K – Sensor for minimum air velocity detection and contactor for overheating protection 2NTC – 2 sensors for the air temperature measuring PTC/2NTC – Sensor for min. air velocity detection and 2 sensors for the air temperature measuring By ordering the PS, an internal contactor for power supply is added to the heater as well. BPC Support We don’t sell boxes; we provide a service that few can match Free Lifetime Technical support on purchased items

GBP 291.68

1

Vent Axia Lo-Carbon Pozidry Compact Pro

Vent Axia Lo-Carbon Pozidry Compact Pro Product Part Number Vent Axia Pozidry Pro Compact with Heater - 479188 Description The new Pozidry Compact Pro with integral heater now available! Technical Features 100mm duct connection Unit weight: 3kg Sound level @ 3m: 11.6-29.7 dB(A) Dimensions W x H x D: 393mm x 206mm x 200mm Removable inner cartridge for easy maintenance and repairs Filters - Washable, high capacity G4 or F7 filter Installation - Easy to install solution for mould and condensation in residential properties If the ambient temperature exceeds 27°C, the Lo-Carbon PoziDry Compact Pro will automatically switch off to prevent over-heating This temperature threshold can be adjusted at installation Models In the case of the integral 300W heater version, the heater element is automatically activated when necessary and tempers the supply air to a chosen temperature. Performance Speed FID (l/s) Power (W) No. Bedrooms Breakout dB(A) @ 3m 1 13 4.0 1 11.6 2 17 8.3 2 18.9 3 21 12.5 3 15.4 4

GBP 414.00

1

Domus CMX-S MEV Unit

Domus CMX-S MEV Unit Product Part Number Domus CMX-S MEV unit - CMX-S Description Previously known as the Polypipe or Silavent Green Line CMX At just 125mm in depth, the CMX is one of the most versatile, easy to install and energy efficient MEV solutions available on the market. Ideal for installation in a wide range of properties, the CMX offers a depth of just 125mm, making it ideal for small ceiling voids or for where space is restricted. Fits into ceiling voids and utility cupboard spaces – horizontally or vertically The 220x90 duct connectors can be converted to 150 round using additional adaptors if required. Technical Features Max Airflow of 430m3/h Specific Fan Power (SFP) as low as 0.24 wls Dimensions (mm) 710 long x 340 wide x 125 high Fitted with two 220x90 duct connections allowing quick connection to ducts Suitable for a floor area up to 275m² The appliance has a low energy, high efficiency EC backward curved centrifugal impeller fan/motor assembly with sealed for life bearings suitable for +50ºC to -25 ºC. Also referred to as System 3 in Approved Document F of the Building Regulations, an MEV system consists of a centralised ventilation unit that continuously extracts waste, polluted and moist air from wet rooms and can be discreetly positioned in either a cupboard, utility room, ceiling or loft space. An MEV system can be ducted throughout the dwelling and operated by the homeowner through a range of control options. Controllability Typically dual speed, MEV systems provide both low speed continuous trickle ventilation and high-speed boost flow when required. Replacement fresh air is drawn into the dwelling through background ventilators i.e. air inlets, located in the living areas. The potentiometer-controlled speed selector allows accurate setting of 3 airflow speeds The unit has 3 fully variable speeds for trickle and boost, A switched live (LS) can also be used to select boost speed An additional third speed (purge) is available using a second switched live connection. Construction PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Accessories ANC848A Manual LOW/BOOST switch Manual BOOST selection switch. LOW speed is engaged upon connection of mains supply. Both speeds are manually adjustable at the wiring centre to facilitate Building Regulation commissioning speeds. ANC849A Manual

GBP 386.03

1

DucoBox Connect MEV

DucoBox Connect MEV The DucoBox silent Connect is a high-quality demand controlled MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system The difference between the DucoBox Silent Uk and DucoBox silent connect is that there is additional possibility to connect several additional features of Wall mounted Wired or RF Remote controls, Room sensors, Connectivity board allowing control via APP and the possible use of the optional commissioning App kit The unit does not come with any sensors and all options are at extra cost Demand controlled with optional internal humidity or Co2 box sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems Key Features Suitable for up to 7 bathrooms Quietest MEV unit in Europe Powerful airflow rate of up to 400 m³/hour @ 150 Pa Sap Appendix Q (BRE) approved Low energy High performance DC fan SFP as low as 0.25 W.L.S. Optional C02 sensor Optional acoustic plus kit Only 4.3 kg in weight Slimline dimensions of 480x480x195mm 3 x Variable fan speeds 2+1 Year parts warranty* Optional 2 or 3 speed switch Suitable for wall or floor mounting Optional Humidity or CO2 box sensor Optional Wired / RF wall controller Optional App / BMS control Optional commissioning App kit Optional 7x 125 to 90 radial adaptors Optional fault indicator Optional laptop connection for commissioning Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions! External Control Components The DucoBox Silent Connect can be linked with the following external control components. Box Sensors Box sensors can be installed very easily and quickly and provide CO2 and/or moisture measurement in an air duct. They are wired directly to the circuit board. This means that no wiring for room sensors need to be provided. A DucoBox Silent contains a maximum of two box sensors – one CO2 Box sensor and/or one Humidity Box Sensor – each of which can be clicked separately into a specific duct opening or together into one duct opening of the DucoBox. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch

GBP 383.39

1

DucoBox Connect MEV with RH BOX Sensor

DucoBox Connect MEV The DucoBox silent Connect is a high-quality demand controlled MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system The difference between the DucoBox Silent Uk and DucoBox silent connect is that there is additional possibility to connect several additional features of Wall mounted Wired or RF Remote controls, Room sensors, Connectivity board allowing control via APP and the possible use of the optional commissioning App kit The unit does not come with any sensors and all options are at extra cost Demand controlled with optional internal humidity or Co2 box sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems Key Features Suitable for up to 7 bathrooms Quietest MEV unit in Europe Powerful airflow rate of up to 400 m³/hour @ 150 Pa Sap Appendix Q (BRE) approved Low energy High performance DC fan SFP as low as 0.25 W.L.S. Optional C02 sensor Optional acoustic plus kit Only 4.3 kg in weight Slimline dimensions of 480x480x195mm 3 x Variable fan speeds 2+1 Year parts warranty* Optional 2 or 3 speed switch Suitable for wall or floor mounting Optional Humidity or CO2 box sensor Optional Wired / RF wall controller Optional App / BMS control Optional commissioning App kit Optional 7x 125 to 90 radial adaptors Optional fault indicator Optional laptop connection for commissioning Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions! External Control Components The DucoBox Silent Connect can be linked with the following external control components. Box Sensors Box sensors can be installed very easily and quickly and provide CO2 and/or moisture measurement in an air duct. They are wired directly to the circuit board. This means that no wiring for room sensors need to be provided. A DucoBox Silent contains a maximum of two box sensors – one CO2 Box sensor and/or one Humidity Box Sensor – each of which can be clicked separately into a specific duct opening or together into one duct opening of the DucoBox. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch

GBP 420.31

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)