24 results (0,14468 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

Fascia Double End Joint Trim - 600mm Dark Grey Smooth

Fascia Double End Joint Trim - 600mm Dark Grey Smooth

fascia double-ended joints, or fascia joiners, are used to cover the expansion gap that should be left between two fascia boards._x000D_These fascia joiners are 600mm in length and coated in a smooth dark grey._x000D_Please check out this video for a quick introduction to installing corners and joiners._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 9.98
1

Fascia Double End Joint Trim - 600mm Storm Grey Smooth

Fascia Double End Joint Trim - 600mm Storm Grey Smooth

fascia double-ended joints, or fascia joiners, are used to cover the expansion gap that should be left between two fascia boards._x000D_These fascia joiners are 600mm in length and coated in a smooth storm grey._x000D_Please check out this video for a quick introduction to installing corners and joiners._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 9.25
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

Anthracite Grey Fascia Capping Board External Corner - 300mm

Anthracite Grey Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1

Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.86
1

Golden Oak Fascia Capping Board External Corner - 300mm

Golden Oak Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1

Rosewood Fascia Capping Board External Corner - 300mm

Rosewood Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Black Ash Woodgrain

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Black Ash Woodgrain

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.86
1

Standard Woodgrain / Grooved Composite Decking Joist - 40mm x 30mm x 3600mm

Standard Woodgrain / Grooved Composite Decking Joist - 40mm x 30mm x 3600mm

Decking joists should be laid on a solid flat surface. Uneven paving, sand or grass could cause the installation to move which could in turn cause damage.It is recommended that joist centres are no greater than 300mm, except when fitting boards on the diagonal where joist centres are 250mm - you should work from the centre out. If used above ground level 250mm centres are recommended.You should use double joists under butt joints, with one clip each side of the butt joint and an 8mm end to end gap for drainage and expansion.

GBP 14.63
1

Ogee Fascia Corner Double Ended - 500mm White

Ogee Fascia Corner Double Ended - 500mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.andnbsp;Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.02
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Anthracite Grey

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Anthracite Grey

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.86
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Rosewood

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Rosewood

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1

Fascia Double End Corner Trim - 600mm Storm Grey Smooth

Fascia Double End Corner Trim - 600mm Storm Grey Smooth

Freefoamand#039;s fascia double-ended corners are supplied in 600mm length and coated in a smooth storm grey.Double-ended corners are used to cover the expansion gap between two fascia boards at the corners of the eaves. This can be achieved by trimming the corner to size, set it in place, and seal it with superglue.Please check out this video for a quick introduction to installing corners and joiners. Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 13.32
1

Fascia Double End Corner Trim - 600mm Dark Grey Smooth

Fascia Double End Corner Trim - 600mm Dark Grey Smooth

Freefoamand#039;s fascia double-ended corners are supplied in 600mm length and coated in a smooth dark grey.Double-ended corners are used to cover the expansion gap between two fascia boards at the corners of the eaves. This can be achieved by trimming the corner to size, set it in place, and seal it with superglue.Please check out this video for a quick introduction to installing corners and joiners. Freefoam fasciaAvailable in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology.Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 13.32
1