KlikkMedia | Google Hirdetés X Online Marketing Tanácsadás

Hygiene Cladding External Corner - for 2-3mm Sheets x 3mtr Length White

Hygiene Panel External Corner trims for 2-3mm thick sheets and 3 metres in length.The External Corner Trim is used to hide edges of the panel when the cladding is used around an external corner.

GBP 8.11

1

Internal Wall Panel External Corner Trim - 2600mm White - For 8mm Bathroom/ Kitchen/ Ceiling Panels

This white trim is used for joining two 8mm thick wall panels together at an external corner.Please Note: Image is for illustrative purposes only, actual trim appearance may vary to suit panels purchased.

GBP 7.75

1

Internal Wall Panel External Corner Trim - 2400mm White - For 10mm Bathroom/ Kitchen/ Ceiling Panels

This white trim is used for joining two 8mm thick wall panels together at an external corner.Please Note: Image is for illustrative purposes only, actual trim appearance may vary to suit panels purchased.

GBP 7.87

1

Fascia External Corner Trim - 135 Degree 300mm Black Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two boards. These joints are 300mm in length.

GBP 5.27

1

Fascia External Corner Trim - 135 Degree 300mm Anthracite Grey Smooth

Replacement fascia joints are used to cover the straight joints in the middle of two boards. These joints are 300mm in length.

GBP 6.32

1

Bullnose Fascia Double Ended External Corner - 600mm x 40mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 600mm long, meaning that you can create 2 joints from 1 piece.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 7.18

1

Bullnose Fascia 135 Degree External Corner - 327mm x 50mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 327mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 7.78

1

White Fascia Capping Board External Corner Joint Trim - 135 Degree x 300mm

135 Degree corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. 135 degree corners (or 45 degree corners as they are also called) are usually found above a bay window on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.All corner trims can be cut to size with a standard hacksaw or fine toothed saw

GBP 5.59

1

Hygiene Cladding Internal Corner - for 2-3mm Sheets x 3mtr Length White

Hygiene Panel Internal Corner trims 2-3mm thick and 3 metres in length.The External Corner Trim is used to hide edges of the panel when the cladding is used around an internal corner.

GBP 8.11

1

AM Clad PVC Hygiene Cladding Angle Trim 25mm x 25mm - 3mtr White

A 25mm x 25mm corner 3 metres in length for Hygiene Panel in Satin White or in one of our subtle pastel colours. This angel trim is used to hide the edges of the panel when the cladding is used in either an internal or external corner.Please allow 2 - 3 days for delivery of this product.

GBP 8.18

1

Performance Marketing Agency

Gain the Advantage with KlikkMedia

Brand

Merchant

Price (EUR)