40 results (0,17878 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Skytec CAT II Nitrile Safety Glove Size 8

Skytec CAT II Nitrile Safety Glove Size 8

Ultra lightweight knuckle coated glove with excellent oil grip. Features and Benefits Extremely thin, flexible knuckle coated glove offering outstanding tactility and grip in oily and wet conditions Protects hands from grease, oils, hydrocarbons and abrasion to end of coated area Soft and supple 18 gauge nylon liner provides excellent fingertips sensitivity Nitrile sandy finish on palm offering exceptional grip properties in oily and wet conditions Created for easy movement and continuous comfortable wear Breathable back of hand to reduce perspiration and keep hands dry Seamless knit prevents irritation Elasticated knitted wrist provides a secure fit Typical Applications Handling oily components Wet Construction Engineering Aerospace Automotive Manufacturing Maintenance Assembly Notes Standards: CAT II EN 388:201 4121X Weight: 18gg liner Length mm: 250

GBP 5.39
1

Ejendals 8803 Infinity Nitrile/Pu 3/4COATED Glove Size 8

Ejendals 8803 Infinity Nitrile/Pu 3/4COATED Glove Size 8

In environments with higher levels of liquids or oil, the Tegera Infinity 8803 provides extra protection not only to the waterproof palm but the knuckles too. Meanwhile wearers will still experience fantastic fingertip sensitivity and dexterity. The synthetic black/yellow glove is coated in Nitrile and Nitrile foam/waterbased PU and has a Nylon lining. The gloves also have a foam grip pattern, are oil and grease resistant, withstand contact heat up to 100C and are suitable for assembly work. Cat. II.

GBP 6.99
1

Ejendals 113 Tegera Palm-side Coated Gloves - Size 8

Ejendals 113 Tegera Palm-side Coated Gloves - Size 8

Constructed from full-grain pigskin, these quality leather gloves are extremely comfortable. The cotton back is soft and breathable to allow hands to keep cool and stay fresh during prolonged use. Features and Benefits High level of mechanical protection to defend against cuts and abrasions Reinforced index finger to strengthen this vulnerable wear point Reinforced fingertips for enhanced protection during precision handling Hook and loop wrist fastening prevents the ingress of dust and debris Typical Applications Automotive Transport Utilities Construction Warehousing and logistics Retail Standards CE Category II EN 388:2016 2.1.1.2.X.

GBP 5.99
1

Tilsatec Nitrile Gloves, Cut Resistant, Grey/Black, Size 8

Tilsatec Nitrile Gloves, Cut Resistant, Grey/Black, Size 8

These micropore palm coated gloves offer a cut E level of protection in wet and oily environments. The nitrile coating offers an excellent grip, while the form-fitting liner provides tactility and dexterity for improved user comfort. Features and Benefits The micro-pore nitrile palm coating is designed to deliver excellent grip Fortified with Rhino Yarn cut resistant technology for added protection Touch screen compatible for user convenience Typical Applications Assembly Automotive Metalworks Glass manufacture White goods Construction Food manufacture Standards CE Category II EN388: 2016 3.X.4.3.E.

GBP 8.39
1

Ejendals 8802 Infinity Nitrile/Pu Palmcoated Glove Size 8

Ejendals 8802 Infinity Nitrile/Pu Palmcoated Glove Size 8

With its double-dipped Nitrile coating on the palm and foam finish, the Tegera Infinity 8802 offers enhanced grip in wet and oily work environments. At the same time, the thin and comfortable Spandex liner still offers a soft fit that allows for plenty of dexterity. The synthetic black/yellow glove is constructed from Nitrile and Nitrile foam/waterbased PU. The glove has a foam grip pattern, withstands contact heat up to 100C, has an oil and grease resistant palm and is suitable for assembly work. Cat. II.

GBP 5.69
1

Tilsatec Cut Resistant Gloves, Foam Nitrile Palm Coated, Black, Cut F, Size 8

Tilsatec Cut Resistant Gloves, Foam Nitrile Palm Coated, Black, Cut F, Size 8

These 10 gauge cut resistance safety gloves are palm-coated with sandy foam nitrile to give a high level of abrasion resistance, and an excellent grip in wet and oily environments. Features and Benefits Rhino Yarn cut resistant technology provides extreme cut resistance Reinforced thumb crotch strengthens this vulnerable wear point 360 breathability keeps the hands cool and comfortable Dark colour hides dirt and extends the life of the glove Knitwrist cuff for maximum user comfort Typical Applications Metal fabrication/stamping Transportation Glass and DGU manufacturing Manufacturing Standards CE Category II EN388:2016 4.X.4.3.F. EN 407:2004 X.1.X.X.X.X.

GBP 6.99
1

Ejendals Tegera 320 Fully Coated Gloves - Size 8

Ejendals Tegera 320 Fully Coated Gloves - Size 8

Designed for lightweight assembly and handling, the Tegera 320 Gloves are constructed from synthetic leather and nylon. The close fit style allows for good hand flexibility and fingertip sensitivity for extra precision work in dry and dirty environments. Features and Benefits Reinforced fingertips and knuckles to protect against abrasion Chrome-free construction to prevent the risks of chrome allergies Hook and loop closure for a secure fit preventing dirt and debris into the glove Typical Applications Transport Warehousing and logistics Automotive Facilities Retail Standards CE certified Category II PPE EN420:2003 + A1:2009 EN388:2016 3.0.2.1.X.

GBP 6.59
1

Honeywell Polytril Flex Nitrile Coated Grey/Black Gloves - Size 8

Honeywell Polytril Flex Nitrile Coated Grey/Black Gloves - Size 8

The Polytril Flex general handling glove features comfortable seamless and lightweight polyamide liners with a nitrile foam coating for grip. The tight knit design delivers excellent support, limits the penetration of dirt and offers good natural movement for fine handling applications. Features and Benefits Open back ventilates the glove and keeps hands comfortable Protects against abrasion injuries for a durable, long-lasting product Close fit design supports the hands and allows for natural movement Good levels of dexterity help to prevent hand fatigue Typical Applications Automotive Storage and logistics Maintenance Transport Standards CE Category II EN 388:2016 4.1.3.1.X.

GBP 5.19
1

5x Mapa Professional Ultrane 548 Poly. H/Dext. Gloves Black SZ.8 (PR)

5x Mapa Professional Ultrane 548 Poly. H/Dext. Gloves Black SZ.8 (PR)

Ultrane Polyurethane palm coated gloves that equip wearers with optimal dexterity and sensitivity. Features and Benefits Reduced thickness for excellent tactile sensitivity and freedom of movement Anatomical shape provides a close fit producing better grip on small objects Back is breathable to keep the hands well ventilated and cool Resistant to abrasives Lightweight Interior made from cotton is comfortable and soft Typical Applications Maintenance Handling Engineering Small parts handling Screw fitting Precision work Mechanical maintenance Automotives Mechanics Outdoor work Handling tasks Manual handling Warehousing Woodwork Metal handling Quarrying Building and Construction Standards EN 388: 3121A Cat II

GBP 4.45
1

Showa Waterproof Gloves, Green PVC, Size 8

Showa Waterproof Gloves, Green PVC, Size 8

Special PVC dipped supple gloves that protect the hands against liquids and abrasions. The rough surface allows for excellent grip whilst the cotton liner allows for irritation free wear. Features and Benefits Impermeable, making them suitable for working in damp or greasy environments Absorbs perspiration and has a loose cuff for comfortable, extended wear Rough palm finishes enhances dexterity and grip Seamless liner helps to avoid irritation Designed for continuous wear with an antibacterial and anti-odour treatment Typical Applications Agriculture Cleaning Gardening Horticulture Logistics Marine Utilities Refuse collection Standards CAT II EN 388: 3.1.2.1. Notes Available in sizes S-XL

GBP 4.99
1

Ejendals 114 Tegera Palm-side Coated Grey/White Gloves - Size 8

Ejendals 114 Tegera Palm-side Coated Grey/White Gloves - Size 8

Get superior comfort without scrimping on safety with the Tegera 114 general handling glove. Made with a blend of high-quality full-grain goatskin and polyester, these gloves are extremely durable with a high level of protection against cuts and abrasions. Features and Benefits Excellent protection against mechanical injuries for enhanced safety Protects the hands against dirt and debris 180 elastication for flexibility and user comfort Excellent fingertip sensitivity for precision work Typical Applications Mining Pulp and paper Automotive Carpentry Engineering Construction HoReCa Standards CE Category II EN 420:2003 + A1:2009 EN 388:2016 2.0.1.1.X.

GBP 5.99
1

Mapa Professional Kroflex 840 'Mapa' Latex Palmcoated CUT-2 Gloves Blue SZ-8

Mapa Professional Kroflex 840 'Mapa' Latex Palmcoated CUT-2 Gloves Blue SZ-8

Designed for use in heavy handling applications, the Krytech 840 gloves deliver high cut protection and good puncture resistance to protect the hands against lacerations and cuts.Features and Benefits Embossed finish latex coating provides excellent grip in wet and oily conditions Silicone-free construction prevents product contamination Knitwrist cuff delivers excellent wearer comfort Knitted liner insulates the hands to protect against heat and coldTypical Applications Waste management Construction Glass industry Ceramics and plastics industriesStandards CE Category II EN 388:2016 3.X.4.3.D. EN 407 X.2.X.X.X.X. EN ISO 13997: 19.8N EN 420 5/5Warnings Contains natural latex which may cause allergies in some users

GBP 7.39
1

Ejendals 882 Tegera Classic Nylon Gloves Black Size 8

Ejendals 882 Tegera Classic Nylon Gloves Black Size 8

The Tegera 882 fully dipped nitrile gloves are used widely for general handling in a variety of industries. Protecting against burns and mechanical injuries for enhanced safety, these gloves are also water and oil-resistant to keep hands safe and dry. Features and Benefits Microfoam grip pattern enhances grip in oily, greasy environments Nitrile foam coating repels water and oil to keep hands clean and dry Protects against heat up to 100C to prevent burns Flexible 15 gauge liner and coating for dexterity and reduced hand fatigue Typical Applications Assembly Construction Carpentry Warehousing and logistics Automotive Transport Utilities Standards CE Category II EN 388:2016 4.1.2.1.X. EN 407:2004 X.1.X.X.X.X.

GBP 4.99
1

Ansell 11-618 Size 8, 0 Mechanical Protection Gloves

Ansell 11-618 Size 8, 0 Mechanical Protection Gloves

HyFlex gloves are very thin and offer outstanding comfort, fit and dexterity in a wide range of lightweight applications. These gloves have been designed for use in dry or slightly oily environments and when a certain degree of dirt. Features and Benefits Almost a second skin, for the most delicate handling 18-gauge knitting technology allows this glove to be ultra-thin yet tough No seams on the inside of the gloves for excellent comfort Typical Applications Ideal where cotton gloves or no gloves are used despite the risk of scrapes, blisters and minor injuries Automotive Machinery and Equipment Metal fabrication Standards EN388:2003 3.1.2.1 EN388:2016 3.1.2.1.X EN 420:2003 + A1:2009 Category II CE Marked

GBP 4.49
1

Mapa Professional Cut Resistant Gloves, PU Coated, Blue/Grey, Size 8

Mapa Professional Cut Resistant Gloves, PU Coated, Blue/Grey, Size 8

These high-performance gloves deliver level D cut protection and are ideal for intricate handling in reasonably clean environments. Features and Benefits Close fit design for excellent dexterity Ventilated back to reduce heat build-up for comfort during prolonged use Seamless construction prevents seam-on-skin irritation Flexible material for natural hand movement for minimal hand fatigue Practical colour design for easy cut level identification Silicone-free to prevent product contamination Washable for up to 3 cleaning cycles for extended wear Knitted cuff for maximum user comfort Typical Applications Automotive Technical maintenance Construction Local authorities Plastics industry Standards CE Category II EN 388:2016 4.X.4.3.D. EN 420: Dexterity 5/5

GBP 6.59
1

Showa Latex Coated Grip Gloves, Orange/Yellow, Size 8

Showa Latex Coated Grip Gloves, Orange/Yellow, Size 8

These multi-purpose gloves are designed specifically with user comfort in mind. Flexible and strong, they deliver excellent grip in a range of working environments and are ideal for heavy lifting tasks. Features and Benefits Latex-coated palm gives exceptional grip, dexterity and durability Seamless knitted design avoids seam on skin discomfort Rough latex surface provides extra grip during applications Open back for ventilation to keep the user comfortable during prolonged periods of wear Typical Applications Construction sites Highway maintenance Logistics Heavy engineering Standards CE Category II EN388:2016 2.1.4.2.X. Warnings Does not protect against electrical, thermal, or chemical hazards Risk of entanglement during machine operating tasks Latex may cause skin reactions Notes Clean with a damp cloth 10 gauge cotton liner

GBP 5.19
1

Ejendals 417 Tegera Winter Gloves S8

Ejendals 417 Tegera Winter Gloves S8

This fully lined synthetic leather glove is designed for allround work in a range of slippery, dry, cold, and dirty environments. Soft with a comfortable fleece lining, they offer durable protection against mechanical injuries, such as blisters, scrapes and other abrasions. Features and Benefits Chrome-free for reduced risks of irritation and skin allergies Good fingertip sensitivity for precision tasks Ergonomically designed for a secure fit with reduced risks of hand fatigue 360 elasticated for full hand flexibility Typical Applications Agriculture Automotive Transport and logistics Construction HoReCa Standards CE Category II EN 420:2003 + A1:2009 EN 388:2016 1.1.3.1.X. EN 511:2006 1.1.X. Warnings Contains natural latex which may cause sensitivity or skin irritation in some users

GBP 5.99
1

Showa 380 Foam Grip Gloves Blue Size 8/L

Showa 380 Foam Grip Gloves Blue Size 8/L

Flexible and robust blue/black gloves that are fully coated with nitrile and an extra nitrile foam coating on the palm. Features and Benefits Air infused nitrile coating absorbs oils better than flat coating The coating provides an excellent grip in oily or greasy applications while maintaining the cut, slash and abrasion resistance of a flat nitrile coating Durable construction makes them ideal for dry or slightly oily applications that require light mechanical protection and high levels of handling finesse Typical Applications Aerospace Automotive Construction Engineering Manufacturing Oil and gas Concreting Handling oily components Maintenance Oil submersion Painting Wet work Standards CAT II EN388: 2003 4.1.2.1. Notes Cuff type: Elasticated with knit wrist Length: 25-28cm Fully coated 13 gauge liner

GBP 4.49
1

Showa Latex Coated Gloves, Mechanical Hazard, Black/Blue, Size 8

Showa Latex Coated Gloves, Mechanical Hazard, Black/Blue, Size 8

For excellent grip in wet or rainy work environments, the 306 multi-purpose glove from Showa repels water while the aerated latex coating allows heat and perspiration to escape to keep hands comfortable and dry. Features and Benefits Full latex coating delivers excellent grip in wet conditions Aerated foam construction cushions the hands against light impact Anatomically shaped for a comfortable fit Flexible material allows for full movement and reduces hand fatigue Vending machine compatible for quick PPE access Typical Applications Agriculture Construction sites Landscaping Logistics Rail Renewables Utilities Standards CE Category II EN388:2016 2.1.2.1.X. Warnings Does not protect against thermal, electrical, or chemical hazards Risk of entanglement when operating machinery Latex may cause allergies Notes Clean with a damp cloth

GBP 8.39
1

Showa Nitrile Coated Grip Gloves, Black/Blue, Size 8

Showa Nitrile Coated Grip Gloves, Black/Blue, Size 8

Flexible and robust blue/black gloves that are fully coated with nitrile and an extra nitrile foam coating on the palm. Features and Benefits Air infused nitrile coating absorbs oils better than flat coating The coating provides an excellent grip in oily or greasy applications while maintaining the cut, slash and abrasion resistance of a flat nitrile coating Durable construction makes them ideal for dry or slightly oily applications that require light mechanical protection and high levels of handling finesse Typical Applications Aerospace Automotive Construction Engineering Manufacturing Oil and gas Concreting Handling oily components Maintenance Oil submersion Painting Wet work Standards CAT II EN388: 2003 4.1.2.1. Notes Cuff type: Elasticated with knit wrist Length: 25-28cm Fully coated 13 gauge liner

GBP 7.19
1

Tuffsafe Nitrile Coated Gloves, Cut E, Grey/Black, Size 8

Tuffsafe Nitrile Coated Gloves, Cut E, Grey/Black, Size 8

Ideal for use in high risk areas, these cut E nitrile coated gloves are ideal for use in oily and greasy environments. The knitted liner ensures flexibility to avoid hand fatigue during extended wear times, while the breathable glove back keeps hands cool and comfortable. Features and Benefits The sandy nitrile coating provides excellent handling grip of oily or greasy components Reinforced thumb crotch provides extra protection in high wear areas Latex-free to avoid allergies and irritation Seamless construction prevents seam on skin irritation for user comfort Elasticated knit wrist cuff prevents the ingress of dirt and debris Open breathable glove back for comfort Palm coating extends to provide arterial protection Typical Applications High risk applications Oil industry Standards CE Category II EN 420:2003 + A1:2009 EN 388:2016 4.X.4.3.E.

GBP 6.99
1

Showa Nitrile Coated Grip Gloves, Grey/Green, Size 8

Showa Nitrile Coated Grip Gloves, Grey/Green, Size 8

These lightweight safety gloves deliver exceptional grip in a range of working environments. The nitrile-coated palms and fingertips protect against grease and oils, as well as minor abrasions and scratches. Fortified with antibacterial and anti-odour treatment, these gloves offer a durable and long-lasting solution to workplace safety. Features and Benefits Open back design reduces perspiration for comfort during prolonged wear Elasticated cuff promotes a snug fit and protects hands against dirt and debris Seamless cotton/polyester liner prevents rubbing and irritation The anatomical shape facilitates movement for maintained dexterity Typical Applications Agriculture Construction Warehousing and Logistics Manufacturing Metallurgy Municipal services Transport Maintenance Heavy-duty handling Refuse collection Standards CE Category II EN388:2003 4.2.3.1. Warnings Does not protect against chemical, electrical, or thermal risks Notes 10 gauge liner Machine washable at 40C using a neutral detergent

GBP 5.49
1